TV REPAIR TIPS PAGE 9

MAKE	MODEL	CHASSIS	SYMPTOM	CURE
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GC641	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC641	CTC149	INTERMITTENT START-UP AT NORMAL LINE VOLTAGE	CHECK/REPLACE C4302 AND Q4301
GE	26GC641	CTC149	VERTICAL FOLDOVER	CHECK/REPLACE R4511
GE	26GC641	CTC149	HORZ. OUTPUT FAILS FOR NO APPARENT REASON	CHECK/REPLACE C4316 FOR OPEN OR INTERMITTENT
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GC641	CTC149	DEAD SET - WEAK OR NO SIGNAL	CHECK/REPLACE C4302 FOR OPEN
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	NO COLOR	CHECK/REPLACE C2808 AND C2817
GE	26GC641	CTC149	SYSTEM CONTROL PROBLEMS - NO CONTROL OF VOLUME AND KEYBOARD LOCKS UP.	CHECK/REPLACE Q3103
GE	26GC641	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORT
GE	26GC641	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GC641	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN
GE	26GC641	CTC149	NO AUTOPROGRAMMING-CHANNELS WOULD TUNE WITH THE REMOTE BUT WERE SLOW TO LOCK IN.	CHECK/ADJUST L2306
GE	26GC641	CTC149	DEAD SET - STANDBY VOLTAGES ARE LOW	CHECK/REPLACE U4101
GE	26GC641	CTC149	OSD HAS NORMAL CHARACTERS AS WELL AS TRASH	CHECK/REPLACE U3300
GE	26GC641	CTC149	SET TURNS ON INTERMITTENT AND OSD HAS SEVERAL LINES OF SCRAMBLED LETTERS.	CHECK/RESOLDER CONNECTIONS ON R3123
GE	26GC641	CTC149	VERTICAL LINES OR RINGING ON THE LEFT SIDE OF SCREEN	CHECK/REPLACE R4403
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE U4101
GE	26GC641	CTC149	LINES AT TOP AND BOTTOM OF THE PIX	CHECK/REPLACE Q4401 FOR LEAKAGE
GE	26GC641	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GC641	CTC149	INTERMITTENT AUDIO	CHECK/RESOLDER CONNECTIONS BETWEEN R2338 AND JC18
GE	26GC641	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	DEAD SET - NO ATTEMPT TO START UP	CHECK/REPLACE Q4301 OPEN
GE	26GC641	CTC149	DEAD SET WITH F4001 OPEN	CHECK/REPLACE C4403 FOR SHORT
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	DEAD SET AND BLOWING F4001	CHECK/REPLACE C4403 FOR SHORTS
GE	26GC641	CTC149	SET PULSES FOR 3 TO 5 SECONDS THEN SHUTSDOWN	CHECK/REPLACE CR4704 FOR SHORT
GE	26GC641	CTC149	FUSE BLOWS INTERMITTENTLY	CHECK/REPLACE C4403 FOR INTERMITTENT SHORT
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC641	CTC149	NO VERTICAL DEFLECTION OR SHORT SWEEP	CHECK/REPLACE R4510,R4512 AND Q3108
GE	26GC641	CTC149	DEAD SET AND WILL NOT START AT NORMAL LINE VOLTAGE	CHECK/REPLACE CR4708 AND CR3104
GE	26GC641	CTC149	EXCESSIVE COLOR WITH NO CONTROL	CHECK/REPLACE U1001
GE	26GC641	CTC149	NO VIDEO - INTERMITTENT VIDEO OR POOR VIDEO - AUDIO OK	CHECK/REPLACE DL2701 DELAY LINE (153674)
GE	26GC641	CTC149	SET COMES ON BUT NO OSD OR PICTURE - AUDIO OF ONE CHANNEL CAN BE HEARD	CHECK/REPLACE CR4703 AND L4703
GE	26GC641	CTC149	NO AUDIO OR VERY LOW AUDIO	CHECK/REPLACE C1925
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	ERRATIC LINES AT TOP AND BOTTOM OF PIX AFTER WARM-UP	CHECK/REPLACE Q4401
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GC641	CTC149	VERT. LINES,JAIL BARS OR RINGING ON LEFT SIDE OF PIX	CHECK/REPLACE R4403 FOR OPEN
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORTS
GE	26GC641	CTC149	NO CONTROL OF BRIGHTNESS - HIGH BRIHGTNESS	CHECK/REPLACE C2703 FOR LEAKAGE
GE	26GC641	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GC641	CTC149	OSD HAS STRANGE GRAPHIC CHARACTERS	CHECK/REPLACE U3300
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORTS
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	WILL NOT TURN ON OR OFF	CHECK/RESOLDER CONNECTIONS ON R3121 (MISSING 60Hz TO PIN 37 OF U3100)
GE	26GC641	CTC149	AUDIO IS DISTORTED ON SOME CHANNELS	CHECK/REPLACE CF1201
GE	26GC641	CTC149	AUDIO BUZZES ON SOME CHANNELS OR DISTORTED	CHECK CF FILTER ON PIN 35 OF U1001
GE	26GC641	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC641	CTC149	VERTICAL BLANKING BAR WOULD OCCASSIONALLY ROLL THRU PICTURE	CHECK/REPLACE U1001
GE	26GC641	CTC149	DEAD SET WITH Q4401 SHORTED	CHECK/REPLACE Q4401 AND CONNECTIONS ON Q4601
GE	26GC641	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC641	CTC149	RANDOM FAILURES OF HORZ. OUTPUT XSTR.	CHECK/REPLACE C4316 FOR OPEN
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	VERTICAL FOLDOVER	CHECK/REPLACE R4511
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	INTERMITTENT AUDIO	CHECK/RESOLDER CONNECTIONS BETWEEN R2338 AND JC18
GE	26GC642	CTC149	SHORT VERTICAL SWEEP OR NO VERTICAL SWEEP	CHECK/REPLACE L4703,R4506 AND U4501
GE	26GC642	CTC149	DEAD SET WITH Q4401 SHORTED	CHECK/REPLACE Q4401 AND CONNECTIONS ON Q4601
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	DEAD SET WITH F4001 OPEN	CHECK/REPLACE C4403 FOR SHORT
GE	26GC642	CTC149	WILL NOT AUTO-PROGRAM ALL CHANNELS-MAY SKIP ONE OR MORE CHANNELS OR MAY INTERMITTENTLY CHANGE CHANNELS	CHECK/REPLACE U3300
GE	26GC642	CTC149	INTERFERENCE IN THE RASTER AND HORZ. OUTPUT SHORTS - SET HAD INTERMITTENT FLAGGING ABOUT 1/2 WAY DOWN SCREEN	CHECK/REPLACE U4101
GE	26GC642	CTC149	VERTICAL BLANKING BAR WOULD OCCASSIONALLY ROLL THRU PICTURE	CHECK/REPLACE U1001
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	DEAD SET AND WILL NOT START AT NORMAL LINE VOLTAGE	CHECK/REPLACE CR4708 AND CR3104
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	FUSE BLOWS INTERMITTENTLY	CHECK/REPLACE C4403 FOR INTERMITTENT SHORT
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	SET SHUTS DOWN AFTER ABOUT 5 SECONDS	CHECK/REPLACE CR4704 FOR SHORTS
GE	26GC642	CTC149	HORZ. OUTPUT FAILS FOR NO APPARENT REASON	CHECK/REPLACE C4316 FOR OPEN OR INTERMITTENT
GE	26GC642	CTC149	OSD HAS NORMAL CHARACTERS AS WELL AS TRASH	CHECK/REPLACE U3300
GE	26GC642	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN OR MISSING
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GC642	CTC149	AUDIO BUZZES ON SOME CHANNELS OR DISTORTED	CHECK CF FILTER ON PIN 35 OF U1001
GE	26GC642	CTC149	OSD HAS STRANGE GRAPHIC CHARACTERS	CHECK/REPLACE U3300
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	VERTICAL LINES OR RINGING ON THE LEFT SIDE OF SCREEN	CHECK/REPLACE R4403
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	VERTICAL COLLASPE INTERMITTENT WHEN CHANGING CHANNELS	CHECK/REPLACE R3133 (SMD)
GE	26GC642	CTC149	WHEN COLD, SET HAS POOR REGULATION AND HORZ. TEARING OR PIE CRUSTING	CHECK/REPLACE CR4709 FOR INTERMITTENT
GE	26GC642	CTC149	SYSTEM CONTROL PROBLEMS - NO CONTROL OF VOLUME AND KEYBOARD LOCKS UP.	CHECK/REPLACE Q3103
GE	26GC642	CTC149	SET COMES ON BUT NO OSD OR PICTURE - AUDIO OF ONE CHANNEL CAN BE HEARD	CHECK/REPLACE CR4703 AND L4703
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORTS
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	WILL NOT TURN ON OR OFF	CHECK/RESOLDER CONNECTIONS ON R3121 (MISSING 60Hz TO PIN 37 OF U3100)
GE	26GC642	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GC642	CTC149	RANDOM FAILURES OF HORZ. OUTPUT XSTR.	CHECK/REPLACE C4316 FOR OPEN
GE	26GC642	CTC149	LINES AT TOP AND BOTTOM OF THE PIX	CHECK/REPLACE Q4401 FOR LEAKAGE
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GC642	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC642	CTC149	NO VERTICAL DEFLECTION OR SHORT SWEEP	CHECK/REPLACE R4510,R4512 AND Q3108
GE	26GC642	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORT
GE	26GC642	CTC149	INTERMITTENT START-UP AT NORMAL LINE VOLTAGE	CHECK/REPLACE C4302 AND Q4301
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORTS
GE	26GC642	CTC149	DEAD SET AND BLOWING F4001	CHECK/REPLACE C4403 FOR SHORTS
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	ERRATIC LINES AT TOP AND BOTTOM OF PIX AFTER WARM-UP	CHECK/REPLACE Q4401
GE	26GC642	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC642	CTC149	NO AUDIO OR VERY LOW AUDIO	CHECK/REPLACE C1925
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GC642	CTC149	NO AUTOPROGRAMMING-CHANNELS WOULD TUNE WITH THE REMOTE BUT WERE SLOW TO LOCK IN.	CHECK/ADJUST L2306
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC642	CTC149	BRIGHTNESS TOO HIGH WITH RETRACE LINES	CHECK/REPLACE CR5001 FOR LEAKAGE
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GC642	CTC149	DEAD SET - WEAK OR NO SIGNAL	CHECK/REPLACE C4302 FOR OPEN
GE	26GC642	CTC149	DEAD SET - NO ATTEMPT TO START UP	CHECK/REPLACE Q4301 OPEN
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORT
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE U4101
GE	26GC642	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC642	CTC149	VERT. LINES,JAIL BARS OR RINGING ON LEFT SIDE OF PIX	CHECK/REPLACE R4403 FOR OPEN
GE	26GC642	CTC149	NO COLOR	CHECK/REPLACE C2808 AND C2817
GE	26GC642	CTC149	WON'T PROGRAM OR TUNE LOWER CHANNELS EVEN WITH HAND UNIT	CHECK/REPLACE U3300
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	SET PULSES FOR 3 TO 5 SECONDS THEN SHUTSDOWN	CHECK/REPLACE CR4704 FOR SHORT
GE	26GC642	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC642	CTC149	NO CONTROL OF BRIGHTNESS - HIGH BRIHGTNESS	CHECK/REPLACE C2703 FOR LEAKAGE
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	NO VIDEO - INTERMITTENT VIDEO OR POOR VIDEO - AUDIO OK	CHECK/REPLACE DL2701 DELAY LINE (153674)
GE	26GC642	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC642	CTC149	DEAD SET - STANDBY VOLTAGES ARE LOW	CHECK/REPLACE U4101
GE	26GC642	CTC149	AUDIO IS DISTORTED ON SOME CHANNELS	CHECK/REPLACE CF1201
GE	26GC642	CTC149	NO START UP ON NORMAL AC LINE VOLTAGE (COULD BE INTERMIT.)	CHECK/REPLACE CR4302 FOR OPEN
GE	26GC642	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC642	CTC149	EXCESSIVE COLOR WITH NO CONTROL	CHECK/REPLACE U1001
GE	26GC642	CTC149	SET TURNS ON INTERMITTENT AND OSD HAS SEVERAL LINES OF SCRAMBLED LETTERS.	CHECK/RESOLDER CONNECTIONS ON R3123
GE	26GC642	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	DEAD SET WITH Q4401 SHORTED	CHECK/REPLACE Q4401 AND CONNECTIONS ON Q4601
GE	26GC660	CTC149	DEAD SET AND WILL NOT START AT NORMAL LINE VOLTAGE	CHECK/REPLACE CR4708 AND CR3104
GE	26GC660	CTC149	NO COLOR	CHECK/REPLACE C2808 AND C2817
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	SET SHUTS DOWN AFTER ABOUT 5 SECONDS	CHECK/REPLACE CR4704 FOR SHORTS
GE	26GC660	CTC149	INTERMITTENT AUDIO	CHECK/RESOLDER CONNECTIONS BETWEEN R2338 AND JC18
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	EXCESSIVE COLOR WITH NO CONTROL	CHECK/REPLACE U1001
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	BRIGHTNESS TOO HIGH WITH RETRACE LINES	CHECK/REPLACE CR5001 FOR LEAKAGE
GE	26GC660	CTC149	NO CONTROL OF BRIGHTNESS - HIGH BRIHGTNESS	CHECK/REPLACE C2703 FOR LEAKAGE
GE	26GC660	CTC149	DEAD SET WITH F4001 OPEN	CHECK/REPLACE C4403 FOR SHORT
GE	26GC660	CTC149	DEAD SET - NO ATTEMPT TO START UP	CHECK/REPLACE Q4301 OPEN
GE	26GC660	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC660	CTC149	ERRATIC LINES AT TOP AND BOTTOM OF PIX AFTER WARM-UP	CHECK/REPLACE Q4401
GE	26GC660	CTC149	SHORT VERTICAL SWEEP OR NO VERTICAL SWEEP	CHECK/REPLACE L4703,R4506 AND U4501
GE	26GC660	CTC149	WILL NOT AUTO-PROGRAM ALL CHANNELS-MAY SKIP ONE OR MORE CHANNELS OR MAY INTERMITTENTLY CHANGE CHANNELS	CHECK/REPLACE U3300
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GC660	CTC149	WHEN COLD, SET HAS POOR REGULATION AND HORZ. TEARING OR PIE CRUSTING	CHECK/REPLACE CR4709 FOR INTERMITTENT
GE	26GC660	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	DEAD SET AND BLOWING F4001	CHECK/REPLACE C4403 FOR SHORTS
GE	26GC660	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC660	CTC149	DEAD SET - WEAK OR NO SIGNAL	CHECK/REPLACE C4302 FOR OPEN
GE	26GC660	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	SYSTEM CONTROL PROBLEMS - NO CONTROL OF VOLUME AND KEYBOARD LOCKS UP.	CHECK/REPLACE Q3103
GE	26GC660	CTC149	VERTICAL COLLASPE INTERMITTENT WHEN CHANGING CHANNELS	CHECK/REPLACE R3133 (SMD)
GE	26GC660	CTC149	VERTICAL LINES OR RINGING ON THE LEFT SIDE OF SCREEN	CHECK/REPLACE R4403
GE	26GC660	CTC149	AUDIO IS DISTORTED ON SOME CHANNELS	CHECK/REPLACE CF1201
GE	26GC660	CTC149	SET COMES ON BUT NO OSD OR PICTURE - AUDIO OF ONE CHANNEL CAN BE HEARD	CHECK/REPLACE CR4703 AND L4703
GE	26GC660	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORT
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	VERT. LINES,JAIL BARS OR RINGING ON LEFT SIDE OF PIX	CHECK/REPLACE R4403 FOR OPEN
GE	26GC660	CTC149	VERTICAL FOLDOVER	CHECK/REPLACE R4511
GE	26GC660	CTC149	SET TURNS ON INTERMITTENT AND OSD HAS SEVERAL LINES OF SCRAMBLED LETTERS.	CHECK/RESOLDER CONNECTIONS ON R3123
GE	26GC660	CTC149	INTERFERENCE IN THE RASTER AND HORZ. OUTPUT SHORTS - SET HAD INTERMITTENT FLAGGING ABOUT 1/2 WAY DOWN SCREEN	CHECK/REPLACE U4101
GE	26GC660	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GC660	CTC149	NO AUTOPROGRAMMING-CHANNELS WOULD TUNE WITH THE REMOTE BUT WERE SLOW TO LOCK IN.	CHECK/ADJUST L2306
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	FUSE BLOWS INTERMITTENTLY	CHECK/REPLACE C4403 FOR INTERMITTENT SHORT
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	OSD HAS STRANGE GRAPHIC CHARACTERS	CHECK/REPLACE U3300
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	LINES AT TOP AND BOTTOM OF THE PIX	CHECK/REPLACE Q4401 FOR LEAKAGE
GE	26GC660	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GC660	CTC149	NO AUDIO OR VERY LOW AUDIO	CHECK/REPLACE C1925
GE	26GC660	CTC149	DEAD SET - STANDBY VOLTAGES ARE LOW	CHECK/REPLACE U4101
GE	26GC660	CTC149	INTERMITTENT START-UP AT NORMAL LINE VOLTAGE	CHECK/REPLACE C4302 AND Q4301
GE	26GC660	CTC149	OSD HAS NORMAL CHARACTERS AS WELL AS TRASH	CHECK/REPLACE U3300
GE	26GC660	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE U4101
GE	26GC660	CTC149	NO START UP ON NORMAL AC LINE VOLTAGE (COULD BE INTERMIT.)	CHECK/REPLACE CR4302 FOR OPEN
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	NO VERTICAL DEFLECTION OR SHORT SWEEP	CHECK/REPLACE R4510,R4512 AND Q3108
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORTS
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN OR MISSING
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORTS
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORT
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	VERTICAL BLANKING BAR WOULD OCCASSIONALLY ROLL THRU PICTURE	CHECK/REPLACE U1001
GE	26GC660	CTC149	WILL NOT TURN ON OR OFF	CHECK/RESOLDER CONNECTIONS ON R3121 (MISSING 60Hz TO PIN 37 OF U3100)
GE	26GC660	CTC149	NO VIDEO - INTERMITTENT VIDEO OR POOR VIDEO - AUDIO OK	CHECK/REPLACE DL2701 DELAY LINE (153674)
GE	26GC660	CTC149	AUDIO BUZZES ON SOME CHANNELS OR DISTORTED	CHECK CF FILTER ON PIN 35 OF U1001
GE	26GC660	CTC149	SET PULSES FOR 3 TO 5 SECONDS THEN SHUTSDOWN	CHECK/REPLACE CR4704 FOR SHORT
GE	26GC660	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	HORZ. OUTPUT FAILS FOR NO APPARENT REASON	CHECK/REPLACE C4316 FOR OPEN OR INTERMITTENT
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GC660	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GC660	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GC660	CTC149	WON'T PROGRAM OR TUNE LOWER CHANNELS EVEN WITH HAND UNIT	CHECK/REPLACE U3300
GE	26GC660	CTC149	RANDOM FAILURES OF HORZ. OUTPUT XSTR.	CHECK/REPLACE C4316 FOR OPEN
GE	26GC660	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GC661	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GT440	CTC149	NO VIDEO - INTERMITTENT VIDEO OR POOR VIDEO - AUDIO OK	CHECK/REPLACE DL2701 DELAY LINE (153674)
GE	26GT440	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN OR MISSING
GE	26GT440	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GT440	CTC149	WILL NOT TURN ON OR OFF	CHECK/RESOLDER CONNECTIONS ON R3121 (MISSING 60Hz TO PIN 37 OF U3100)
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	DEAD SET AND WILL NOT START AT NORMAL LINE VOLTAGE	CHECK/REPLACE CR4708 AND CR3104
GE	26GT440	CTC149	DEAD SET - STANDBY VOLTAGES ARE LOW	CHECK/REPLACE U4101
GE	26GT440	CTC149	NO VERTICAL DEFLECTION OR SHORT SWEEP	CHECK/REPLACE R4510,R4512 AND Q3108
GE	26GT440	CTC149	SET SHUTS DOWN AFTER ABOUT 5 SECONDS	CHECK/REPLACE CR4704 FOR SHORTS
GE	26GT440	CTC149	NO START UP ON NORMAL AC LINE VOLTAGE (COULD BE INTERMIT.)	CHECK/REPLACE CR4302 FOR OPEN
GE	26GT440	CTC149	DEAD SET WITH F4001 OPEN	CHECK/REPLACE C4403 FOR SHORT
GE	26GT440	CTC149	DEAD SET WITH Q4401 SHORTED	CHECK/REPLACE Q4401 AND CONNECTIONS ON Q4601
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE U4101
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORTS
GE	26GT440	CTC149	SHORT VERTICAL SWEEP OR NO VERTICAL SWEEP	CHECK/REPLACE L4703,R4506 AND U4501
GE	26GT440	CTC149	FUSE BLOWS INTERMITTENTLY	CHECK/REPLACE C4403 FOR INTERMITTENT SHORT
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GT440	CTC149	INTERMITTENT START-UP AT NORMAL LINE VOLTAGE	CHECK/REPLACE C4302 AND Q4301
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORT
GE	26GT440	CTC149	OSD HAS NORMAL CHARACTERS AS WELL AS TRASH	CHECK/REPLACE U3300
GE	26GT440	CTC149	INTERFERENCE IN THE RASTER AND HORZ. OUTPUT SHORTS - SET HAD INTERMITTENT FLAGGING ABOUT 1/2 WAY DOWN SCREEN	CHECK/REPLACE U4101
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT440	CTC149	BRIGHTNESS TOO HIGH WITH RETRACE LINES	CHECK/REPLACE CR5001 FOR LEAKAGE
GE	26GT440	CTC149	NO AUTOPROGRAMMING-CHANNELS WOULD TUNE WITH THE REMOTE BUT WERE SLOW TO LOCK IN.	CHECK/ADJUST L2306
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	DEAD SET - WEAK OR NO SIGNAL	CHECK/REPLACE C4302 FOR OPEN
GE	26GT440	CTC149	HORZ. OUTPUT FAILS FOR NO APPARENT REASON	CHECK/REPLACE C4316 FOR OPEN OR INTERMITTENT
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	SET PULSES FOR 3 TO 5 SECONDS THEN SHUTSDOWN	CHECK/REPLACE CR4704 FOR SHORT
GE	26GT440	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT440	CTC149	INTERMITTENT AUDIO	CHECK/RESOLDER CONNECTIONS BETWEEN R2338 AND JC18
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	NO CONTROL OF BRIGHTNESS - HIGH BRIHGTNESS	CHECK/REPLACE C2703 FOR LEAKAGE
GE	26GT440	CTC149	VERTICAL BLANKING BAR WOULD OCCASSIONALLY ROLL THRU PICTURE	CHECK/REPLACE U1001
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GT440	CTC149	SET TURNS ON INTERMITTENT AND OSD HAS SEVERAL LINES OF SCRAMBLED LETTERS.	CHECK/RESOLDER CONNECTIONS ON R3123
GE	26GT440	CTC149	WON'T PROGRAM OR TUNE LOWER CHANNELS EVEN WITH HAND UNIT	CHECK/REPLACE U3300
GE	26GT440	CTC149	SET COMES ON BUT NO OSD OR PICTURE - AUDIO OF ONE CHANNEL CAN BE HEARD	CHECK/REPLACE CR4703 AND L4703
GE	26GT440	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GT440	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORTS
GE	26GT440	CTC149	VERTICAL COLLASPE INTERMITTENT WHEN CHANGING CHANNELS	CHECK/REPLACE R3133 (SMD)
GE	26GT440	CTC149	VERT. LINES,JAIL BARS OR RINGING ON LEFT SIDE OF PIX	CHECK/REPLACE R4403 FOR OPEN
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	NO COLOR	CHECK/REPLACE C2808 AND C2817
GE	26GT440	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT440	CTC149	AUDIO BUZZES ON SOME CHANNELS OR DISTORTED	CHECK CF FILTER ON PIN 35 OF U1001
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	VERTICAL LINES OR RINGING ON THE LEFT SIDE OF SCREEN	CHECK/REPLACE R4403
GE	26GT440	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GT440	CTC149	OSD HAS STRANGE GRAPHIC CHARACTERS	CHECK/REPLACE U3300
GE	26GT440	CTC149	RANDOM FAILURES OF HORZ. OUTPUT XSTR.	CHECK/REPLACE C4316 FOR OPEN
GE	26GT440	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT440	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	WILL NOT AUTO-PROGRAM ALL CHANNELS-MAY SKIP ONE OR MORE CHANNELS OR MAY INTERMITTENTLY CHANGE CHANNELS	CHECK/REPLACE U3300
GE	26GT440	CTC149	ERRATIC LINES AT TOP AND BOTTOM OF PIX AFTER WARM-UP	CHECK/REPLACE Q4401
GE	26GT440	CTC149	DEAD SET AND BLOWING F4001	CHECK/REPLACE C4403 FOR SHORTS
GE	26GT440	CTC149	EXCESSIVE COLOR WITH NO CONTROL	CHECK/REPLACE U1001
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	VERTICAL FOLDOVER	CHECK/REPLACE R4511
GE	26GT440	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	AUDIO IS DISTORTED ON SOME CHANNELS	CHECK/REPLACE CF1201
GE	26GT440	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORT
GE	26GT440	CTC149	DEAD SET - NO ATTEMPT TO START UP	CHECK/REPLACE Q4301 OPEN
GE	26GT440	CTC149	LINES AT TOP AND BOTTOM OF THE PIX	CHECK/REPLACE Q4401 FOR LEAKAGE
GE	26GT440	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT440	CTC149	SYSTEM CONTROL PROBLEMS - NO CONTROL OF VOLUME AND KEYBOARD LOCKS UP.	CHECK/REPLACE Q3103
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT440	CTC149	WHEN COLD, SET HAS POOR REGULATION AND HORZ. TEARING OR PIE CRUSTING	CHECK/REPLACE CR4709 FOR INTERMITTENT
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT440	CTC149	NO AUDIO OR VERY LOW AUDIO	CHECK/REPLACE C1925
GE	26GT440	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GT440	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GT441	CTC149	DEAD SET - NO ATTEMPT TO START UP	CHECK/REPLACE Q4301 OPEN
GE	26GT441	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE U4101
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	FUSE BLOWS INTERMITTENTLY	CHECK/REPLACE C4403 FOR INTERMITTENT SHORT
GE	26GT441	CTC149	AUDIO IS DISTORTED ON SOME CHANNELS	CHECK/REPLACE CF1201
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	LINES AT TOP AND BOTTOM OF THE PIX	CHECK/REPLACE Q4401 FOR LEAKAGE
GE	26GT441	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT441	CTC149	VERT. LINES,JAIL BARS OR RINGING ON LEFT SIDE OF PIX	CHECK/REPLACE R4403 FOR OPEN
GE	26GT441	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORT
GE	26GT441	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE CR4301 AND Q4301
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN
GE	26GT441	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	CLOCK RUNS TOO FAST	CHECK/REPLACE C3112 FOR OPEN OR MISSING
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	BRIGHTNESS TOO HIGH WITH RETRACE LINES	CHECK/REPLACE CR5001 FOR LEAKAGE
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	BLOWS FUSE IMMEDIATELY	CHECK/REPLACE Q4401 AND T4401 FOR SHORT
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	NO COLOR	CHECK/REPLACE C2808 AND C2817
GE	26GT441	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT441	CTC149	VERTICAL BLANKING BAR WOULD OCCASSIONALLY ROLL THRU PICTURE	CHECK/REPLACE U1001
GE	26GT441	CTC149	SET TURNS ON INTERMITTENT AND OSD HAS SEVERAL LINES OF SCRAMBLED LETTERS.	CHECK/RESOLDER CONNECTIONS ON R3123
GE	26GT441	CTC149	SYSTEM CONTROL PROBLEMS - NO CONTROL OF VOLUME AND KEYBOARD LOCKS UP.	CHECK/REPLACE Q3103
GE	26GT441	CTC149	SHORT VERTICAL SWEEP OR NO VERTICAL SWEEP	CHECK/REPLACE L4703,R4506 AND U4501
GE	26GT441	CTC149	WHEN COLD, SET HAS POOR REGULATION AND HORZ. TEARING OR PIE CRUSTING	CHECK/REPLACE CR4709 FOR INTERMITTENT
GE	26GT441	CTC149	INTERMITTENT SOUND FAILURE WITH SET COLD	CHECK/REPLACE R1 IN AUDIO POWER SUPPLY
GE	26GT441	CTC149	INTERFERENCE IN THE RASTER AND HORZ. OUTPUT SHORTS - SET HAD INTERMITTENT FLAGGING ABOUT 1/2 WAY DOWN SCREEN	CHECK/REPLACE U4101
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE CR4102 FOR SHORTS
GE	26GT441	CTC149	DEAD SET AND BLOWING F4001	CHECK/REPLACE C4403 FOR SHORTS
GE	26GT441	CTC149	WON'T PROGRAM OR TUNE LOWER CHANNELS EVEN WITH HAND UNIT	CHECK/REPLACE U3300
GE	26GT441	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT441	CTC149	EXCESSIVE COLOR WITH NO CONTROL	CHECK/REPLACE U1001
GE	26GT441	CTC149	SET SHUTS DOWN AFTER ABOUT 5 SECONDS	CHECK/REPLACE CR4704 FOR SHORTS
GE	26GT441	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	DEAD SET - STANDBY VOLTAGES ARE LOW	CHECK/REPLACE U4101
GE	26GT441	CTC149	SET PULSES FOR 3 TO 5 SECONDS THEN SHUTSDOWN	CHECK/REPLACE CR4704 FOR SHORT
GE	26GT441	CTC149	HORZ. OUTPUT FAILS FOR NO APPARENT REASON	CHECK/REPLACE C4316 FOR OPEN OR INTERMITTENT
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GT441	CTC149	ERRATIC LINES AT TOP AND BOTTOM OF PIX AFTER WARM-UP	CHECK/REPLACE Q4401
GE	26GT441	CTC149	RANDOM FAILURES OF HORZ. OUTPUT XSTR.	CHECK/REPLACE C4316 FOR OPEN
GE	26GT441	CTC149	OSD HAS NORMAL CHARACTERS AS WELL AS TRASH	CHECK/REPLACE U3300
GE	26GT441	CTC149	OSD HAS STRANGE GRAPHIC CHARACTERS	CHECK/REPLACE U3300
GE	26GT441	CTC149	INTERMITTENT AUDIO	CHECK/RESOLDER CONNECTIONS BETWEEN R2338 AND JC18
GE	26GT441	CTC149	VERTICAL FOLDOVER	CHECK/REPLACE R4511
GE	26GT441	CTC149	INTERMITTENT START-UP AT NORMAL LINE VOLTAGE	CHECK/REPLACE C4302 AND Q4301
GE	26GT441	CTC149	NO START UP ON NORMAL AC LINE VOLTAGE (COULD BE INTERMIT.)	CHECK/REPLACE CR4302 FOR OPEN
GE	26GT441	CTC149	DEAD SET - WEAK OR NO SIGNAL	CHECK/REPLACE C4302 FOR OPEN
GE	26GT441	CTC149	NO AUTOPROGRAMMING-CHANNELS WOULD TUNE WITH THE REMOTE BUT WERE SLOW TO LOCK IN.	CHECK/ADJUST L2306
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	SET COMES ON BUT NO OSD OR PICTURE - AUDIO OF ONE CHANNEL CAN BE HEARD	CHECK/REPLACE CR4703 AND L4703
GE	26GT441	CTC149	WILL NOT AUTO PROGRAM CHANNELS - WHEN MANUALLY SELECTING CHANNELS WITH REMOTE,LOOKS LIKE AFT IS WAY OFF	CHECK/REPLACE IC U1001 (193082)
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	NO AUDIO OR VERY LOW AUDIO	CHECK/REPLACE C1925
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	VERTICAL COLLASPE INTERMITTENT WHEN CHANGING CHANNELS	CHECK/REPLACE R3133 (SMD)
GE	26GT441	CTC149	BLOWS FUSE QUICK-LOW RESISTANCE ON HORZ. TO GRD.	CHECK FOR SHORTED C403
GE	26GT441	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORTS
GE	26GT441	CTC149	AUDIO BUZZES ON SOME CHANNELS OR DISTORTED	CHECK CF FILTER ON PIN 35 OF U1001
GE	26GT441	CTC149	NO VERTICAL DEFLECTION OR SHORT SWEEP	CHECK/REPLACE R4510,R4512 AND Q3108
GE	26GT441	CTC149	WILL NOT TURN ON OR OFF	CHECK/RESOLDER CONNECTIONS ON R3121 (MISSING 60Hz TO PIN 37 OF U3100)
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	SOUND IS OK BUT NO VIDEO	CHECK IC U1001
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	DEAD SET WITH Q4401 SHORTED	CHECK/REPLACE Q4401 AND CONNECTIONS ON Q4601
GE	26GT441	CTC149	DEAD SET WITH F4001 OPEN	CHECK/REPLACE C4403 FOR SHORT
GE	26GT441	CTC149	VERTICAL LINES OR RINGING ON THE LEFT SIDE OF SCREEN	CHECK/REPLACE R4403
GE	26GT441	CTC149	NO CONTROL OF BRIGHTNESS - HIGH BRIHGTNESS	CHECK/REPLACE C2703 FOR LEAKAGE
GE	26GT441	CTC149	NO VIDEO - INTERMITTENT VIDEO OR POOR VIDEO - AUDIO OK	CHECK/REPLACE DL2701 DELAY LINE (153674)
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	NO COLOR	CHECK/REPLACE C2804 FOR SHORT
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT441	CTC149	DEAD SET AND WILL NOT START AT NORMAL LINE VOLTAGE	CHECK/REPLACE CR4708 AND CR3104
GE	26GT441	CTC149	WILL NOT AUTO-PROGRAM ALL CHANNELS-MAY SKIP ONE OR MORE CHANNELS OR MAY INTERMITTENTLY CHANGE CHANNELS	CHECK/REPLACE U3300
GE	26GT441	CTC149	DEAD SET	CHECK/REPLACE SCR4101
GE	26GT640	CTC157	DEAD SET WITH NO ATTEMPT TO START	CHECK/REPLACE Q4301 FOR OPEN
GE	26GT642	CTC157	DEAD SET - STANDBY VOLTAGES OK	CHECK/REPLACE CR4162 (MAY CHECK OK)
GE	27GL805	CTC159	NO VIDEO	CHECK/REPLACE R1435
GE	27GT536	CTC177	INTERMITTENT VERTICAL SWEEP - SHRINKS VERTICALLY	CHECK/RESOLDER CONNECTIONS ON SHIELDING AROUND SYSCON IC AND TUNER - ALL GROUND CONNECTIONS
GE	27GT612	CTC167	PULLED IN ON THE SIDES - PINCUSHION PROBLEM	CHECK/REPLACE C4809 AND Q4804
GE	27GT613	CTC177	NO STEREO - OSD STEREO INDICATOR NEVER COMES ON	CHECK/REPLACE C1707 (P/N# 205230)
GE	27GT613	CTC177	INTERMITTENT VERTICAL SWEEP - SHRINKS VERTICALLY	CHECK/RESOLDER CONNECTIONS ON SHIELDING AROUND SYSCON IC AND TUNER - ALL GROUND CONNECTIONS
GE	27GT618	CTC187	PICTURE GOES BLACK AFTER A 1/2 HOUR - OSD/AUDIO IS NORMAL	CHECK/REPLACE U2903 (7805 REGULATOR)
GE	27GT619	CTC185	SET SHUTS DOWN AS SOON AS IT IS POWERED UP	CHECK/REPLACE Q4114 (P/N# 231523)
GE	31GT656	CTC169	INTERMITTENT LUMINANCE - CHROMA OK	CHECK/REPLACE Q6415
GE	31GT656	CTC169	PICTURE SHRUNK ON ALL 4 SIDES - MAYBE INTERMITTENT	CHECK/RESOLDER CONNECTIONS ON Q4101
GE	31GT656	CTC169	DEAD SET - HAS A CLICKING NOISE FROM CHOPPER TRANSFORMER	CHECK/REPLACE CR4401
GE	35GT690	CTC187	AGC OVERLOAD - PIN #12 OF U1001 STAYS AT 8 VOLTS - WHEN 'IF' IS INJECTED AT PIN #1 OF U7301 , THEN NORMAL PICTURE	CHECK/REPLACE U7301 (P/N# 215532)
GE	77690	N/A	FOLDOVER AT THE BOTTOM OF SCREEN AND TOP IS SLIGHTLY STRETCHED	CHECK/REPLACE C427
GE	77800	N/A	TV NOT WORKING BUT AUDIO SYSTEM OK	CHECK/REPLACE C913
GE	80975	K20	NO HORIZ. SWEEP - WHITE VERTICAL LINE ON SCREEN	CHECK/RESOLDER CONNECTIONS ON L401
GE	81900	MK1	DEAD SET WITH F002 FUSE BLOWN	CHECK/REPLACE Q551,C553,R558
GE	81910	MK1	DEAD SET WITH F002 FUSE BLOWN	CHECK/REPLACE Q551,C553,R558
GE	81930	MK1	DEAD SET WITH F002 FUSE BLOWN	CHECK/REPLACE Q551,C553,R558
GE	81930	MK1	DEAD SET WITH F002 FUSE BLOWN	CHECK/REPLACE Q551 (ECG2302),C553 (.0022uF),R558 (560 ohm 1 watt)
GE	81931	MK1	DEAD SET WITH F002 FUSE BLOWN	CHECK/REPLACE Q551 (ECG2302),C553 (.0022uF),R558 (560 ohm 1 watt)
GE	81931	MK1	DEAD SET WITH F002 FUSE BLOWN	CHECK/REPLACE Q551,C553,R558
GE	81932	CTC136	INTERMITTENT START UP	CHECK/REPLACE R420 (0.18 2watt)
GE	81938	MK1	DEAD SET WITH F002 FUSE BLOWN	CHECK/REPLACE Q551,C553,R558
GE	82040	CTC136	REMOTE NOT WORKING AT DISTANCES MORE THAN 2 FEET	CHECK CR617 FOR SHORT
GE	82040	CTC136	LINES IN PIX-MISSING LOW BAND 2-6	CHECK C677 FOR OPEN
GE	82040	CTC136	DISTORTED SOUND	CHECK/REPLACE R208
GE	82040	CTC136	POOR REGULATION - NOISE LINES IN PIX - PIX PULLS AT HIGH BRIGHTNESS	CHECK/REPLACE CR106 AND Q101
GE	82040	CTC136	REGULATED B+ IS LOW (80-85v) AND SOUNDS LIKE A MOTORBOAT	CHECK/REPLACE C120 (.047uF)
GE	82040	CTC136	INTERMITTENT VENETIAN BLIND EFFECT ON THE ENTIRE SCREEN	CHECK SOLDER CONNECTIONS ON R503 (VERT SIZE CONTROL)
GE	82040	CTC136	OVERLOADED PIX OR DISTORTED VIDEO	CHECK R303 FOR A CHANGE IN VALUE
GE	82040	CTC136	DISTORTED SOUND	CHECK/REPLACE R208
GE	82040	CTC136	REPEATED HORZ. OUTPUT FAILURE	CHECK/REPLACE Q402,C411 (154482)
GE	82040	CTC136	JAIL BARS ON LEFT AND DARK PIX	CHECK/REPLACE C716 @ PIN # 13 OF U101
GE	82040	CTC136	SET WON'T SHUT OFF	CHECK/REPLACE Q601 INSIDE 'MTT' MODULE
GE	82040	CTC136	NON-LINEAR VERTICAL SWEEP - TOP IS STRETCHED AND BOTTOM IS COMPRESSED	CHECK/REPLACE C501 (2.2uF @ 50v)
GE	82040	CTC136	PICTURE BOUNCES OR JITTERS/LINEARITY PROBLEMS ALSO	CHECK/REPLACE U1001,R501 AND R502
GE	82040	CTC136	PIX IS MISSING BUT AUDIO IS NORMAL	CHECK R129 AND T402
GE	82040	CTC136	PICTURE PULLS OR TEARS AT THE BOTTOM ALSO Q402 RUNS HOT	CHECK/REPLACE R420 FOR CHANGE IN VALUE
GE	82040	CTC136	PIX LOOKS LIKE A UPSIDE DOWN CHRISTMAS TREE	CHECK R109 FOR OPEN
GE	82040	CTC136	DEAD-BLOWS AC FUSE-SHORT ON Q402 (E-C)-XSTR OK	CHECK C415 YOKE COUPLING FOR SHORTS
GE	82040	CTC136	POOR FOCUS AND BRIGHT PICTURE	CHECK/REPLACE C113 (179225)
GE	82040	CTC136	LOOSES COLOR ON CHANNEL 6 POSSIBLY DUE TO FM INTERFERENCE	REMOVE R2805
GE	82040	CTC136	INTERMITTENT NO AUDIO OR VIDEO - TIC/TIC NOISE - MAY PLAY FOR HOURS BEFORE ACTING UP	CHECK/REPLACE L403 INTERMITTENT
GE	82040	CTC136	DARK OUT OF FOCUS PICTURE	CHECK/REPLACE R129
GE	82040	CTC136	SCREEN FLASHES GREEN AND NO OSD - TUNES CHANNELS OK	CHECK/REPLACE Q906,Q907 AND CR622 FOR LEAKAGE
GE	82040	CTC136	INTERMITTENT START UP	CHECK/REPLACE R420 (0.18 2watt)
GE	82040	CTC136	BRIGHT GREEN SCREEN W/RETRACE LINES	CHECK/RESOLDER CONNECTIONS IN 'MTT' MODULE
GE	82040	CTC136	INTERMITTENT NO AUDIO OR VIDEO - TIC/TIC NOISE - MAY PLAY FOR HOURS BEFORE ACTING UP	CHECK/REPLACE L403 INTERMITTENT
GE	82040	CTC136	INTERMITTENT START UP	CHECK/REPLACE R420 (0.18 2watt)
GE	82040	CTC136	PIX LOOKS LIKE A UPSIDE DOWN CHRISTMAS TREE	CHECK C120 FOR OPEN
GE	82040	CTC136	NO START-UP OR PULSATING PIX - REGULATOR PROBLEMS	CHECK/REPLACE C120
GE	82040	CTC136	LUMINANCE/CHROMA/VERTICAL PROBLEMS - 9 VOLT SUPPLY LOW	CHECK/REPLACE CR110,CR111,R127,L703,C714,C807,CR502
GE	82040	CTC136	REMOTE WORKS INTERMITTENTLY AND VOLUME GOES TO MAXIMUM INTERMITTENTLY	CHECK/RESOLDER CONNECTIONS IN 'MTT' TUNER CONTROL MODULE WHERE CONNECTORS ARE SOLDERED TO BOARD
GE	82040	CTC136	DEAD SET	CHECK C417 FOR SHORT
GE	82040	CTC136	DEAD SET	CHECK/REPLACE Q601 IN 'MTT' MODULE
GE	82040	CTC136	DEAD SET-REPEATED FAILURES OF R101 AND HORZ. OUTPUT -- SQUEALS JUST BEFORE IT FAILS	CHECK/REPLACE Y401 (CERAMIC RESONATOR)
GE	82040	CTC136	RINGING IN THE RASTER - VERTICAL BARS ON THE LEFT SIDE	CHECK/REPLACE R415 (1000 ohm)
GE	82040	CTC136	SET WON'T SHUT OFF	CHECK/REPLACE Q601 INSIDE 'MTT' MODULE
GE	82040	CTC136	REPEATED HORZ. OUTPUT FAILURE	CHECK/REPLACE C411
GE	82040	CTC136	JAIL BARS AND DARK PICTURE	CHECK/REPLACE C716 (154388) AND R415 (830210)
GE	82040	CTC136	REMOTE WORKS INTERMITTENTLY AND VOLUME GOES TO MAXIMUM INTERMITTENTLY	CHECK/RESOLDER CONNECTIONS IN 'MTT' TUNER CONTROL MODULE WHERE CONNECTORS ARE SOLDERED TO BOARD
GE	82040	CTC136	SHORT VERT SWEEP AT TOP AND BOTTOM OF PIX	CHECK/REPLACE CR110 FOR SHORT
GE	82040	CTC136	DEAD-BLOWS AC FUSE-SHORT ON Q402 (E-C)-XSTR OK	CHECK C415 YOKE COUPLING FOR SHORTS
GE	82040	CTC136	SEVERE TRAPEZOIDAL PICTURE AND PULSATING	CHECK/REPLACE C120
GE	82040	CTC136	GREEN SCREEN WITH NO VIDEO OR AUDIO	CHECK THE 1 OHM FUSIBLE RESISTOR LOCATED OFF OF PIN 3 OF THE FLYBACK
GE	82040	CTC136	DEAD SET	CHECK C417 FOR SHORT
GE	82040	CTC136	REGULATED B+ IS LOW (80-85v) AND SOUNDS LIKE A MOTORBOAT	CHECK/REPLACE C120 (.047uF)
GE	82040	CTC136	DISTORTED SOUND	CHECK/REPLACE R208
GE	82040	CTC136	LINES IN PIX-MISSING LOW BAND 2-6	CHECK C677 FOR OPEN
GE	82040	CTC136	POOR FOCUS - BRIGHT PIX WITH RETRACE - MAY IMPROVE AFTER SET IS ON FOR AWHILE	CHECK/REPLACE C113 (33uF @ 100v)
GE	82040	CTC136	NO PICTURE-NO SOUND-HV NORMAL-LED READOUT DEAD	CHECK/RESOLDER CONNECTIONS ON L104 AND R125
GE	82040	CTC136	BRIGHT GREEN SCREEN W/RETRACE LINES	CHECK/RESOLDER CONNECTIONS IN 'MTT' MODULE
GE	82040	CTC136	SNOWY PIX,LOSS OF AUDIO AND PIX INTERMITTENT	CHECK C317 FOR OPEN
GE	82040	CTC136	NON-LINEAR VERTICAL DEFLECTION	CHECK/REPLACE C501 (176494)
GE	82040	CTC136	NO START-UP - PULSATES	CHECK/REPLACE C120 (154482)
GE	82040	CTC136	NO PICTURE	CHECK/REPLACE Q951 AND Q952 FOR LEAKAGE
GE	82040	CTC136	VERTICAL STRETCHES AFTER WARMUP WITH FOLDOVER	CHECK/REPLACE CR111 FOR OPEN
GE	82040	CTC136	NO AUDIO OR VIDEO BUT HIGH VOLTAGE IS OK	CHECK/REPLACE R127 FOR OPEN
GE	82040	CTC136	NO LUMINANCE BUT HIGH VOLTAGE IS OK	CHECK/REPLACE C706 FOR SHORT
GE	82040	CTC136	DEAD SET	CHECK/REPLACE Q601 IN 'MTT' MODULE
GE	82545	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	DEAD SET - NO START UP	CHECK/REPLACE CR10
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SET TURNS ON AND OFF	CHECK/REPLACE C11 IN REGULATOR CIRCUIT
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	NO OSD	CHECK/REPLACE C1 ON MSD002 MODULE
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	HAS HORZ. SQUEAL WITH A DIM AND ODD LOOKING RASTER	CHECK/REPLACE C404
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	DARK RASTER WITH VERY LOW VOLUME - PICTURE TRIES TO SEARCH BUT CHANNEL NUMBER REMAINS THE SAME	CHECK/REPLACE C677 IN 'MTT004' MODULE
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	DARK RASTER OR FILAMENTS NOT LIT	CHECK/REPLACE R5013
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	WHEN TURNED ON, TV PULSES ON/OFF 2 TIMES OR MORE THEN COMES ON OK - USUALLY WHEN SET IS COLD	CHECK/REPLACE C7 AND C11 IN POWER SUPPLY
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	DEAD SET - HORZ. OUT TO GRD. IS SHORTED	CHECK/REPLACE C425 FOR SHORT
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	DARK RASTER WITH VERY LOW VOLUME - PICTURE TRIES TO SEARCH BUT CHANNEL NUMBER REMAINS THE SAME	CHECK/REPLACE C677 IN 'MTT004' MODULE
GE	82568	CTC130	RETRACE LINES AT THE TOP OF PICTURE	CHECK/REPLACE C506
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	NO OSD	CHECK/REPLACE C1 ON MSD002 MODULE
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	REMOTE WORKS INTERMITTENTLY AND VOLUME GOES TO MAXIMUM INTERMITTENTLY	CHECK/RESOLDER CONNECTIONS IN 'MTT' TUNER CONTROL MODULE WHERE CONNECTORS ARE SOLDERED TO BOARD
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	PICTURE STRETCHED HORZ. APPROX. 1'	CHECK/REPLACE C423 FOR INCREASE IN VALUE
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	DEAD SET	CHECK/REPLACE CR7
GE	82568	CTC130	LINES IN PIX - HORZ. SYNC UNSTABLE - INTERMITTENT HORZ. OUTPUT XSTR. FAILURE	CHECK/REPLACE C406 FOR CHANGE IN VALUE
GE	82568	CTC130	DEAD SET - BLOWS FUSE - Q401 SHORTED	CHECK/REPLACE SCR101,Q401,FUSE
GE	82568	CTC130	FLASHES ON/OFF WHEN TURNED ON - MAY CYCLE ON/OFF RAPIDLY	CHECK/REPLACE CR105
GE	82568	CTC130	HAS HORZ. SQUEAL WITH A DIM AND ODD LOOKING RASTER	CHECK/REPLACE C404
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	DEAD SET - NO START UP	CHECK/REPLACE CR10
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	LOW BRIGHT WITH HORZ. LINES - MAY HAVE JAIL BARS ON LEFT - PIX PULSATES ON SCENE CHANGES	CHECK/REPLACE IC U701
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	INTERMITTENT AUDIO/PIX (MAY TAKE DAYS TO OCCUR)	CHECK/REPLACE C423 FOR INCREASE IN VALUE
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	FLASHING BLACK LINES APPEARS ON PICTURE AFTER WARM-UP	CHECK/REPLACE U701
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	REMOTE WORKS INTERMITTENTLY AND VOLUME GOES TO MAXIMUM INTERMITTENTLY	CHECK/RESOLDER CONNECTIONS IN 'MTT' TUNER CONTROL MODULE WHERE CONNECTORS ARE SOLDERED TO BOARD
GE	82568	CTC130	POOR PINCUSHION - SIDES OF PIX BOWED	CHECK/REPLACE Q1 AND Q2 ON PINCUSHION MODULE
GE	82568	CTC130	PIX NORMAL BUT AUDIO IS DISTORTED ON SOME CHANNELS	CHECK/REPLACE Q101 (STEREO MODELS ONLY)
GE	82568	CTC130	PINCUSHION NOT WORKING	CHECK/REPLACE Q2 AND C425 FOR LEAKY
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	INTERMITTENT START-UP	CHECK/REPLACE R16 (0.5 ohm) FOR INCREASE IN VALUE
GE	82568	CTC130	OSD SMEARED	CHECK/RESOLDER CONNECTIONS ON R667 (SMD)
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	VERTICAL JITTER ON VCR OR SOME CABLE SYSTEMS	ADD DIODE (164717) WITH ANODE TO THE EMITTER OF Q305 AND CATHODE TO A 30k. ATTACH OTHER END OF RESISTOR TO BASE Q305
GE	82568	CTC130	DARK RASTER OR FILAMENTS NOT LIT	CHECK/REPLACE R5013
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	OSD SMEARED	CHECK/RESOLDER CONNECTIONS ON R667 (SMD)
GE	82568	CTC130	SET TURNS ON AND OFF	CHECK/REPLACE C11 IN REGULATOR CIRCUIT
GE	82568	CTC130	NO COLOR	CHECK/REPLACE C826 FOR LEAKAGE
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	VERTICAL IS STRETCHED	CHECK/REPLACE C423 FOR INCREASE IN VALUE
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	REPEATED HORZ. OUTPUT FAILURE	CHECK/REPLACE Q402,R424,R426,T401,C423,C425
GE	82568	CTC130	DEAD SET	CHECK/REPLACE CR7
GE	82568	CTC130	VIDEO HAS SIGNS OF RINGING OR GHOST	CHECK/REPLACE R4209 (SHARPNESS CONTROL)
GE	82568	CTC130	SLOW TICKING AND NO SOUND OR PICTURE	CHECK/REPLACE C425 FOR SHORT
GE	82568	CTC130	VERT HEIGHT STRETCHED AND CONTROL HAS NO EFFECT	CHECK/REPLACE C510 FOR LEAKAGE
GE	82568	CTC130	RINGING IN THE PICTURE-LOW BRIGHTNESS-VERTICAL BARS ON THE LEFT SIDE OF PICTURE-HORZ LINES OF NOISE IN VIDEO	CHECK/REPLACE IC U701 (152051)
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	WHEN TURNED ON, TV PULSES ON/OFF 2 TIMES OR MORE THEN COMES ON OK - USUALLY WHEN SET IS COLD	CHECK/REPLACE C7 AND C11 IN POWER SUPPLY
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	AUDIO IS MOTOR BOATING	CHECK/REPLACE U301 (IF PROCESSOR)
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	DEAD SET	CHECK/REPLACE CR7
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	FLASHING BLACK LINES APPEARS ON PICTURE AFTER WARM-UP	CHECK/REPLACE U701
GE	82568	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
GE	82568	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	SLOW TICKING AND NO SOUND OR PICTURE	CHECK/REPLACE C425 FOR SHORT
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
GE	82568	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82568	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
GE	82568	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
GE	82568	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
GE	82660	CTC130	NO OSD	CHECK/REPLACE C1 ON MSD002 MODULE
GE	82685	CTC140	TEARING,FLASHING AND ROLLING IN THE PICTURE	CHECK/RESOLDER CONNECTIONS ON L2307 TO PIN 7 OF U2300
GE	82685	CTC140	NO SOUND OR PIX BUT HAS HIGH VOLTAGE AND Q2100 RUNS HOT	CHECK/REPLACE CR2300 (9.1v ZENER)
GE	82685	CTC140	GRAINY,GHOSTY PICTURE - 12VOLT SUPPLY DOWN TO 9.5 VOLTS	CHECK/REPLACE CR2100
GE	82685	CTC140	DEAD SET BUT LED LIGHTS COME ON WHEN POWER BUTTON PUSHED BUT WON'T SWITCH OFF	CHECK/REPLACE CR4104
GE	82685	CTC140	DEAD SET BUT LED LIGHTS	CHECK/REPLACE R4101 (2.2k)
GE	9GP103	TX81	NO SOUND BUT PICTURE IS NORMAL	CHECK/REPLACE LP03
GE	9GP103	TX81	DEAD SET WITH OPEN FUSE	CHECK/REPLACE FP01,TP10 AND CP08
GE	9GP103	TX81	NO BRIGHTNESS	CHECK/REPLACE CV14 FOR SHORT
GE	9GP103	TX81	DEAD SET WITH TIC-TIC	CHECK/REPLACE TP11 FOR SHORT
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE FP01,TP10 AND SHORTED LP04
GE	9GP103	TX81	DEAD SET - 5 VOLT STANDBY SUPPLY IS DOWN TO 2.5 VOLTS	CHECK/REPLACE TP15 (P/N# 198752)
GE	9GP103	TX81	HIGHLY INTERMITTENT SHUTDOWN WITH MOTORBOAT IN AUDIO	CHECK/REPLACE INTERMITTENT DP01
GE	9GP103	TX81	NO VERTICAL SWEEP - SOUND IS NORMAL	CHECK/REPLACE IL01 (DEFLECTION/LUMA IC)
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE CP08
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE CP08
GE	9GP103	TX81	NO VERTICAL SWEEP - SOUND IS NORMAL	CHECK/REPLACE IL01 (DEFLECTION/LUMA IC)
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE CP08
GE	9GP103	TX81	NO AUDIO BUT PIX IS OK	CHECK/REPLACE RP54 FOR OPEN
GE	9GP103	TX81	DEAD WITH LINE FUSE OPEN,TP10 SHORTED AND CP22 BULGED - 150 VOLT LINE UP TO 350 VOLTS	CHECK/RESOLDER CONNECTIONS ON CP17
GE	9GP103	TX81	NO BRIGHTNESS	CHECK/REPLACE CV14 FOR SHORT
GE	9GP103	TX81	HIGHLY INTERMITTENT SHUTDOWN WITH MOTORBOAT IN AUDIO	CHECK/REPLACE INTERMITTENT DP01
GE	9GP103	TX81	DEAD WITH LINE FUSE OPEN,TP10 SHORTED AND CP22 BULGED - 150 VOLT LINE UP TO 350 VOLTS	CHECK/RESOLDER CONNECTIONS ON CP17
GE	9GP103	TX81	DEAD SET WITH OPEN FUSE	CHECK/REPLACE FP01,TP10 AND CP08
GE	9GP103	TX81	TURNS ON 2 OR 3 TIMES THEN SHUTS OFF, THEN WILL NOT COME ON AGAIN	CHECK/REPLACE TP07
GE	9GP103	TX81	DEAD WITH LINE FUSE OPEN,TP10 SHORTED AND CP22 BULGED - 150 VOLT LINE UP TO 350 VOLTS	CHECK/RESOLDER CONNECTIONS ON CP17
GE	9GP103	TX81	HIGHLY INTERMITTENT SHUTDOWN WITH MOTORBOAT IN AUDIO	CHECK/REPLACE INTERMITTENT DP01
GE	9GP103	TX81	DISTORTED AUDIO OR AUDIO BUZZ OR INTERMITTENT AUDIO	CHECK/REPLACE SPEAKER (P/N# 198787)
GE	9GP103	TX81	NO SOUND BUT PICTURE IS NORMAL	CHECK/REPLACE LP03
GE	9GP103	TX81	DEAD SET WITH OPEN FUSE	CHECK/REPLACE FP01,TP10 AND CP08
GE	9GP103	TX81	NO SOUND BUT PICTURE IS NORMAL	CHECK/REPLACE LP03
GE	9GP103	TX81	DEAD SET WITH TIC-TIC	CHECK/REPLACE TP11 FOR SHORT
GE	9GP103	TX81	REPEATED FAILURE OF TP10 (HORIZONTAL OUTPUT)	CHECK/REPLACE TP10 (198794),AND CP08 (190501)
GE	9GP103	TX81	NO AUDIO BUT PIX IS OK	CHECK/REPLACE RP54 FOR OPEN - INSTALL KIT 196074
GE	9GP103	TX81	DEAD SET - NO BLOWN FUSES	CHECK/REPLACE DP11 (P/N# 198590) AND DP14 (P/N# 220636)
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE FP01,TP10 AND SHORTED LP04
GE	9GP103	TX81	TURNS ON 2 OR 3 TIMES THEN SHUTS OFF, THEN WILL NOT COME ON AGAIN	CHECK/REPLACE TP07
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE CP01 (100uF @ 35v)
GE	9GP103	TX81	NO BRIGHTNESS	CHECK/REPLACE CV14 FOR SHORT
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE DP12 FOR SHORT
GE	9GP103	TX81	REPEATED FAILURE OF TP10 (HORIZONTAL OUTPUT)	CHECK/REPLACE TP10 (198794),CHANGE CP32 4700pF (202044), CHANGE RP41 1000 ohm (198678),CHANGE TP06 (198748)
GE	9GP103	TX81	DEAD SET - IF MASTER SCREEN IS INCREASED, A WHITE LINE, (NO VERTICAL SWEEP) IS OBSERVED	CHECK/REPLACE DP18 AND RP68
GE	9GP103	TX81	NO SOUND BUT PICTURE IS NORMAL	CHECK/REPLACE LP03
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE CP08
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE CP01 (100uF @ 35v)
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE FP01,TP10 AND SHORTED LP04
GE	9GP103	TX81	DEAD SET WITH TIC-TIC	CHECK/REPLACE TP11 FOR SHORT
GE	9GP103	TX81	VERTICAL FOLDOVER	CHECK/REPLACE DF04
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE CP08
GE	9GP103	TX81	NO VERTICAL SWEEP - SOUND IS NORMAL	CHECK/REPLACE IL01 (DEFLECTION/LUMA IC)
GE	9GP103	TX81	VERTICAL FOLDOVER	CHECK/REPLACE DF04
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE DP12 FOR SHORT
GE	9GP103	TX81	NO SOUND BUT PICTURE IS NORMAL	CHECK/REPLACE LP03
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE CP01 (100uF @ 35v)
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE DP12 FOR SHORT
GE	9GP103	TX81	VERTICAL FOLDOVER	CHECK/REPLACE DF04
GE	9GP103	TX81	TURNS ON 2 OR 3 TIMES THEN SHUTS OFF, THEN WILL NOT COME ON AGAIN	CHECK/REPLACE TP07
GE	9GP103	TX81	DEAD SET	CHECK/REPLACE DP20 SHORTED
GE	C33GE681	CTC187	AGC OVERLOAD - PIN #12 OF U1001 STAYS AT 8 VOLTS - WHEN 'IF' IS INJECTED AT PIN #1 OF U7301 , THEN NORMAL PICTURE	CHECK/REPLACE U7301 (P/N# 215532)
GOLDSTAR	N/A	NC05X	SMALL PIX TOP AND BOTTOM - VERTICAL SIZE WON'T ADJUST	CHECK/REPLACE R505
GOLDSTAR	N/A	NC06X1	DEAD AND BLOWS B+ FUSE	CHECK/REPLACE C319 AND YOKE
GOLDSTAR	N/A	NF01X	NO VERTICAL-BRIGHT WHITE LINE WITH JAIL BARS ON THE LEFT SIDE OF SCREEN	CHECK/REPLACE C442
GOLDSTAR	N/A	NT01X	INTERMITTENT NO SOUND	CHECK/REPLACE C601 AND IC601
GOLDSTAR	N/A	NT01X	R813 BURNS UP	CHECK/REPLACE R813 AND C438
GOLDSTAR	N/A	NT01X	BLUE SCREEN WITH RETRACE LINES	CHECK/REPLACE Q203 (MAY CHECK GOOD)
GOLDSTAR	CMR4160	N/A	NO RED	CHECK/REPLACE IC501
GOLDSTAR	CMR4200	NF01X	INTERMITTENT SHUTDOWN AFTER 5-15 MINUTES	B+ REGULATOR IC
GOLDSTAR	CMR4200	NF01X	NO HORIZONTAL SWEEP - LINE UP AND DOWN THROUGH CENTER	CHECK/RESOLDER CONNECTIONS ON C435 AND T431
GOLDSTAR	CMR4200	NF01X	LOW BRIGHTNESS	SUB BRIGHTNESS CONTROL DIRTY OR TOUCHY
GOLDSTAR	CMR4200	NF01X	DEAD-NO B+ TO HORZ. OUTPUT	R802 AND/OR REGULATOR IC
GOLDSTAR	CMR4540	N/A	NO COLOR	CHECK/REPLACE C503 FOR LEAKY
GOLDSTAR	CMS4841	N/A	VERTICAL PROBLEM W/RETRACE AT TOP OF PICTURE	CHECK/REPLACE C312 AND IC201
GOLDSTAR	CMT2193	N/A	SNOW ON ALL CHANNELS OR VERY SNOWY PIX ON ALL CHANNELS	CHECK/REPLACE IC201 (TA8680N)
GOLDSTAR	CMT2194	N/A	SNOWY PIX OR NO PIX	CHECK/REPLACE C102
GOLDSTAR	CMT2538	N/A	OVERSHOOTING VERY LARGE	CHANGE R94 TO A 10k
GOLDSTAR	CMT2562A	NC0CA	INTERMITTENT VERTICAL PICTURE DISTORTION OR NO VERTICAL SWEEP	CHECK/REPLACE D301 (P/N# 0DD400202AA OR 1N4002)
GOLDSTAR	CMT2562A	NC0CA	DEAD SET	CHECK/REPLACE T401 (P/N# 151-101B) FOR SHORTED PRIMARY TURNS AND Q402 (P/N# KTC1001)
GOLDSTAR	CMT2612	N/A	SMEARED PICTURE-VERTICAL HAS LINES JUMPING AND R313 BURNS UP AFTER 15 SECONDS.	CHECK/REPLACE C307
GOLDSTAR	CMT2615	N/A	KOREAN CHARACTERS DISPLAYED ON OSD	ADD 39k IN PARALLEL W/CO2 ON PIN 42 OF IC01
GOLDSTAR	CMT2615	N/A	SMEARED PICTURE-VERTICAL HAS LINES JUMPING AND R313 BURNS UP AFTER 15 SECONDS.	CHECK/REPLACE C307
GOLDSTAR	CMT4072	N/A	HORIZONTAL BARS IN THE UHF CHANNELS CAUSED BY STRONG VHF CHANNELS	ADD A 0.1uF @ 50v TO THE 'BT' LINE ON TUNER TO GROUND
GOLDSTAR	CMT4200	NF01X	LOW BRIGHTNESS OR BRIGHTNESS LEVEL VARIES	CHECK/REPLACE R223 (150k) OPEN OR CHANGED IN VALUE
GOLDSTAR	CMT4385	NF01X	NO VIDEO AND NO SOUND BUT RASTER IS OK	CHECK/REPLACE C109 AND IC101
GOLDSTAR	CMT4385	NF01X	INTRMITTENT PIX-NO SOUND-TUNER APPEARS TO BE OK-HV OK	CHECK/REPLACE L441,D441 AND C442
GOLDSTAR	CMT4385	NF01X	NO HORIZONTAL SWEEP - LINE UP AND DOWN THROUGH CENTER	CHECK/RESOLDER CONNECTIONS ON C435 AND T431
GOLDSTAR	CMT4385	NF01X	SOUND BUT NO RASTER-ONLY A FAINT HORZ. LINE	CHECK/REPLACE R327
GOLDSTAR	CMT4385	NF01X	NO POWER	CHECK/REPLACE IC08 ON FREQUENCY SYNTHESISER BOARD
GOLDSTAR	CMT4385	NF01X	LOW BRIGHTNESS OR BRIGHTNESS LEVEL VARIES	CHECK/REPLACE R223 (150k) OPEN OR CHANGED IN VALUE
GOLDSTAR	CMT4385	NF01X	VIDEO SMEAR	CHECK/REPLACE C443
GOLDSTAR	CMT4448	NF01X	LOW BRIGHTNESS OR BRIGHTNESS LEVEL VARIES	CHECK/REPLACE R223 (150k) OPEN OR CHANGED IN VALUE
GOLDSTAR	CMT4448	NF01X	INTERMITTENT NO PICTURE NO SOUND	CHECK/REPLACE L441 ATD441 & C442 JUNCTION
GOLDSTAR	CMT4448	NF01X	DEAD SET AFTER CHANGING REMOTE & TUNING BOARD	BE SURE COF-4 &COF-6 PLUGS HAVE NOTBEEN REVERSED
GOLDSTAR	CMT4448	NF01X	SOUND BUT NO RASTER-ONLY A FAINT HORZ. LINE	CHECK/REPLACE R327
GOLDSTAR	CMT4448	NF01X	INSUFFICIENT VOLUME	CHECK R21 AND IC11
GOLDSTAR	CMT4448	NF01X	VIDEO SMEAR	CHECK/REPLACE C443
GOLDSTAR	CMT4448	NF01X	SHORT VERT SWEEP--ABOUT 1/2 SCREEN	CHECK C327 AND C329
GOLDSTAR	CMT4448	NF01X	DEAD SET START UP VOLTAGES OK	CHECK OR REPLACE R441
GOLDSTAR	CMT4448	NF01X	NO VIDEO AND NO SOUND BUT RASTER IS OK	CHECK/REPLACE C109 AND IC101
GOLDSTAR	CMT4448	NF01X	SET IN SHUT DOWN START UP VOLT OK HIGH Bt	check or replace R332
GOLDSTAR	CMT4448	NF01X	SOUND GOES IN/OUT	CHECK/RESOLDER Q503 ON F/S BOARD
GOLDSTAR	CMT4448	NF01X	PROPER CRT TRACK UNOBTAINABLE DC VOLT AT Q562LOW	CHECK/REPLACE C519 IF IC501 AND Q562 ARE OK
GOLDSTAR	CMT4448	NF01X	INTERMITTENTLY GOES OFF BUT NOT GOING INTO SHUTDOWN AND NOT LOSING B+	CHECK/RESOLDER CONNECTIONS ON R451 (HORZ. HOLD CTRL)
GOLDSTAR	CMT4448	NF01X	BLINKING OR DISPLAY INTERMITTENT REMOTE CONTROL	CHECK/RESOLDER THE REMOTE PRE-AMP ASSEM ALL GROUND CO
GOLDSTAR	CMT4448	NF01X	INTRMITTENT PIX-NO SOUND-TUNER APPEARS TO BE OK-HV OK	CHECK/REPLACE L441,D441 AND C442
GOLDSTAR	CMT4448	NF01X	UNIT MUST BE UNPLUGGED TO TURN SET OFF	REPLACE POWER RELAY
GOLDSTAR	CMT4448	NF01X	NO POWER	CHECK OR REPLACE IC08 12V REG ON FREQ SYS BOARD
GOLDSTAR	CMT4448	NF01X	CANNOT TUNE STATIONS SNOW ONLY	CHECK FOR 33V REPLACE IC10
GOLDSTAR	CMT4448	NF01X	PICTURE PULSATES AND PULLED IN ON ALL SIDES	CHECK OR REPLACE D805
GOLDSTAR	CMT4448	NF01X	SLOW LOSS OF SCANNING LINES FROM TOP DOWNWARD	REPLACE Q321
GOLDSTAR	CMT4448	NF01X	SOUND NO PIX FAINT LINE ACROSS SCREEN	CHECK REPLACE R327
GOLDSTAR	CMT4448	NF01X	ON/OFF SWITCH INOPERATIVE	CHECK /REPLACE RELAY RL01
GOLDSTAR	CMT4448	NF01X	ON/OFF SWITCH INOPERATIVE	CHECK/REPLACE RELAY RLO1
GOLDSTAR	CMT4448	NF01X	NO HORIZONTAL SWEEP - LINE UP AND DOWN THROUGH CENTER	CHECK/RESOLDER CONNECTIONS ON C435 AND T431
GOLDSTAR	CMT4448	NF01X	NO VIDEO NO SOUND RASTER OK	CHECK/REPLACE C109 &IC101
GOLDSTAR	CMT4448	NF01X	NO POWER	CHECK/REPLACE IC08 ON FREQUENCY SYNTHESISER BOARD
GOLDSTAR	CMT4448	NF01X	NO POWER UP-JUMPING RELAY TURNS SET ON	CHECK AND RESOLDER ALL FLYBACK CONNECTIONS
GOLDSTAR	CMT4842	NC95A	RELAY WILL NOT STAY ON	CHECK/REPLACE D810
GOLDSTAR	CMT4842	NC95A	POOR AUDIO	CHECK/REPLACE Q903
GOLDSTAR	CMT4842	NC95A	TURN SET ON AND RELAY KICKS OFF AFTER 2-3 SECONDS WON'T STAY ON	CHECK/REPLACE D810 FOR OPEN OR SHORT (P/N# 06220071)
GOLDSTAR	CMT9165	NT01X	NO SOUND OR PIX,B+ NORMAL,HV OK,12V MISSING	CHECK FOR OPEN D441 OR R443
GOLDSTAR	CMT9325	NT01X	NO VHF LOW BAND--VHF HIGH & UHF ARE NORMAL	REPLACE VARACTOR TUNER
GOLDSTAR	CMT9428	NC06X1	DEAD AFTER STORM DAMAGE	CHECK/REPLACE D805,D806 AND Q801
GOLDSTAR	CMT9442	NC06X	POOR REGULATION	CHECK/REPLACE D802
GOLDSTAR	CMT9442	NC06X	DEAD SET	CHECK/REPLACE D801
GOLDSTAR	CMT9482X	N/A	HIGH VOLTAGE ARCING AND DISTORTED PICTURE	CHECK/REPLACE IC501 AND X401
GOLDSTAR	CMT9842	NC95A	SHORT VERTICAL SWEEP	CHECK/REPLACE D301 - MAY CHECK GOOD OUT OF CIRCUIT
GOLDSTAR	CMT9842	NC95A	SNOW ON ALL CHANNELS OR VERY SNOWY PIX ON ALL CHANNELS	CHECK/REPLACE IC201 (TA8680N)
GOLDSTAR	CMT9842	NC95A	DISTORTED AUDIO AND COULD BE THERMAL	CHECK/REPLACE IC201 (TA8680N)
GOLDSTAR	CMT9842	NC95A	TURN SET ON AND RELAY KICKS OFF AFTER 2-3 SECONDS WON'T STAY ON	CHECK/REPLACE D810 FOR OPEN OR SHORT (P/N# 06220071)
GOLDSTAR	CMT9842X	N/A	HIGH VOLTAGE ARCING AND DISTORTED PICTURE	CHECK/REPLACE IC501 AND X401
GOLDSTAR	CMT9842X	N/A	NO COLOR	CHECK/RESOLDER CONNECTIONS ON P501 OR INTERNAL PLUG CONNECTIONS
GOLDSTAR	CMT9842X	NC95A	NO START UP	CHECK/REPLACE IC201 (P/N# 0IT0868000A OR TA8680N)
GOLDSTAR	CMT9842X	NC95A	SNOWY PICTURE AND AGC DOESN'T WORK	CHECK/REPLACE IC501 (TA8680N)
GOLDSTAR	CMX4200	N/A	NO COLOR	CHECK/REPLACE IC501,X501,C509 AND C303
GOLDSTAR	CMZ2525	NT01X	NO SOUND OR PIX--HIGH VOLTS OK--CLOCK & CHAN OK	COLD SOLDER CONNECTION ON R0601
GOLDSTAR	CMZ4382	N/A	PICTURE PULLED IN ON SIDES	CHECK/REPLACE D802 SHORTED
GOLDSTAR	CMZ4382	N/A	SMEARED PICTURE-VERTICAL HAS LINES JUMPING AND R313 BURNS UP AFTER 15 SECONDS.	CHECK/REPLACE C307
GOLDSTAR	CMZ4382	N/A	DEAD SET	CHECK/REPLACE D802,F801 AND F802
GOLDSTAR	CMZ4385	NC05X3	INTERMITTENT OR NO COLOR	CHECK/REPLACE C509 FOR LEAKAGE OR INTERMITTENT
GOLDSTAR	CN20A10X	N/A	CHANNEL 6 IS SKIPPED WHILE IN THE CATV MODE	REMOVE R66 AND ADD A JUMPER FROM C820 (+) TO R12
GOLDSTAR	GCT1304M	N/A	ANTENNA SHEILD BOX CONNECTION BREAKS	CHECK/REPLACE WITH NEW PART (P/N# 401-068G) AND ADD A WASHER TO EACH SIDE OF THE MOUNTING PLATE
GOLDSTAR	GCT1354M	N/A	ANTENNA SHEILD BOX CONNECTION BREAKS	CHECK/REPLACE WITH NEW PART (P/N# 401-068G) AND ADD A WASHER TO EACH SIDE OF THE MOUNTING PLATE
GOLDSTAR	GCT1904M	N/A	ANTENNA SHEILD BOX CONNECTION BREAKS	CHECK/REPLACE WITH NEW PART (P/N# 401-068G) AND ADD A WASHER TO EACH SIDE OF THE MOUNTING PLATE
GOLDSTAR	GCT2504S	N/A	NO VERTICAL DEFLECTION	CHECK/REPLACE C310 (220uF @ 50v),FR318 AND IC301
HITACHI	27AX0B	N/A	CHANNELS 16 & 17 HAVE POOR PICTURE AND ALOT OF WHITE GLITTERY STREAKS - POPPING IN SPEAKERS WHILE SET IS ON	ADD 10-33pF TO B-C OF Q854,Q855,Q856 - CUT FOIL BETWEEN ZD804-Q854B,ZD805-Q855B AND ZD806-Q856B AND ADD 100 1/16w
HITACHI	27AX0B	N/A	AUDIO BUZZ WHEN ON SCREEN GRAPHICS ARE DISPLAYED OR WHEN WHITE LETTERS ARE DISPLAYED	INSTALL A JUMPER FROM C201 GROUND TO C223 GROUND AND MOVE WIRES FROM THE 'P' CONNECTOR AWAY FROM THE IF CIRCUIT
HITACHI	27AX1B	N/A	AUDIO BUZZ WHEN ON SCREEN GRAPHICS ARE DISPLAYED OR WHEN WHITE LETTERS ARE DISPLAYED	INSTALL A JUMPER FROM C201 GROUND TO C223 GROUND AND MOVE WIRES FROM THE 'P' CONNECTOR AWAY FROM THE IF CIRCUIT
HITACHI	27AX1B	N/A	HORZ. OUTPUT FAILS WHEN SET IS TURNED ON	REMOVE C924 AND DISCARD
HITACHI	27AX2	N/A	DEAD SET - NO ATTEMPT TO TURN ON	CHECK/REPLACE D902 (P/N# ECG125)
HITACHI	27AX2B	N/A	AUDIO BUZZ WHEN ON SCREEN GRAPHICS ARE DISPLAYED OR WHEN WHITE LETTERS ARE DISPLAYED	INSTALL A JUMPER FROM C201 GROUND TO C223 GROUND AND MOVE WIRES FROM THE 'P' CONNECTOR AWAY FROM THE IF CIRCUIT
HITACHI	27AX2B	N/A	HORZ. OUTPUT FAILS WHEN SET IS TURNED ON	REMOVE C924 AND DISCARD
HITACHI	27AX3B	N/A	CHANNELS 16 & 17 HAVE POOR PICTURE AND ALOT OF WHITE GLITTERY STREAKS - POPPING IN SPEAKERS WHILE SET IS ON	ADD 10-33pF TO B-C OF Q854,Q855,Q856 - CUT FOIL BETWEEN ZD804-Q854B,ZD805-Q855B AND ZD806-Q856B AND ADD 100 1/16w
HITACHI	27AX4B	N/A	CHANNELS 16 & 17 HAVE POOR PICTURE AND ALOT OF WHITE GLITTERY STREAKS - POPPING IN SPEAKERS WHILE SET IS ON	ADD 10-33pF TO B-C OF Q854,Q855,Q856 - CUT FOIL BETWEEN ZD804-Q854B,ZD805-Q855B AND ZD806-Q856B AND ADD 100 1/16w
HITACHI	27AX5	N/A	DEAD SET - RELAY DOES CLICK	CHECK/REPLACE Q711 (2SC4589-P/N# 2315272),R748 (1.1 - P/N# 0119722) AND R792 (0.5 - P/N# 0119838)
HITACHI	27CX0	N/A	DEAD SET - RELAY DOES CLICK	CHECK/REPLACE Q711 (2SC4589-P/N# 2315272),R748 (1.1 - P/N# 0119722) AND R792 (0.5 - P/N# 0119838)
HITACHI	31DX10B	N/A	AUDIO BUZZ WHEN ON SCREEN GRAPHICS ARE DISPLAYED OR WHEN WHITE LETTERS ARE DISPLAYED	INSTALL A JUMPER FROM C201 GROUND TO C223 GROUND AND MOVE WIRES FROM THE 'P' CONNECTOR AWAY FROM THE IF CIRCUIT
HITACHI	31DX10B	N/A	HORZ. OUTPUT FAILS WHEN SET IS TURNED ON	REMOVE C924 AND DISCARD
HITACHI	31DX11	N/A	DEAD SET - RELAY DOES CLICK	CHECK/REPLACE Q711 (2SC4589-P/N# 2315272),R748 (1.1 - P/N# 0119722) AND R792 (0.5 - P/N# 0119838)
HITACHI	31DX11B	N/A	CHANNELS 16 & 17 HAVE POOR PICTURE AND ALOT OF WHITE GLITTERY STREAKS - POPPING IN SPEAKERS WHILE SET IS ON	ADD 10-33pF TO B-C OF Q854,Q855,Q856 - CUT FOIL BETWEEN ZD804-Q854B,ZD805-Q855B AND ZD806-Q856B AND ADD 100 1/16w
HITACHI	31DX20B	N/A	AUDIO BUZZ WHEN ON SCREEN GRAPHICS ARE DISPLAYED OR WHEN WHITE LETTERS ARE DISPLAYED	INSTALL A JUMPER FROM C201 GROUND TO C223 GROUND AND MOVE WIRES FROM THE 'P' CONNECTOR AWAY FROM THE IF CIRCUIT
HITACHI	31DX20B	N/A	HORZ. OUTPUT FAILS WHEN SET IS TURNED ON	REMOVE C924 AND DISCARD
HITACHI	31DX21	N/A	DEAD SET - RELAY DOES CLICK	CHECK/REPLACE Q711 (2SC4589-P/N# 2315272),R748 (1.1 - P/N# 0119722) AND R792 (0.5 - P/N# 0119838)
HITACHI	31DX22	N/A	DEAD SET - RELAY DOES CLICK	CHECK/REPLACE Q711 (2SC4589-P/N# 2315272),R748 (1.1 - P/N# 0119722) AND R792 (0.5 - P/N# 0119838)
HITACHI	31DX31B	N/A	CHANNELS 16 & 17 HAVE POOR PICTURE AND ALOT OF WHITE GLITTERY STREAKS - POPPING IN SPEAKERS WHILE SET IS ON	ADD 10-33pF TO B-C OF Q854,Q855,Q856 - CUT FOIL BETWEEN ZD804-Q854B,ZD805-Q855B AND ZD806-Q856B AND ADD 100 1/16w
HITACHI	31GX31	N/A	DEAD SET - RELAY DOES CLICK	CHECK/REPLACE Q711 (2SC4589-P/N# 2315272),R748 (1.1 - P/N# 0119722) AND R792 (0.5 - P/N# 0119838)
HITACHI	31GX31B	N/A	CHANNELS 16 & 17 HAVE POOR PICTURE AND ALOT OF WHITE GLITTERY STREAKS - POPPING IN SPEAKERS WHILE SET IS ON	ADD 10-33pF TO B-C OF Q854,Q855,Q856 - CUT FOIL BETWEEN ZD804-Q854B,ZD805-Q855B AND ZD806-Q856B AND ADD 100 1/16w
HITACHI	31KX39	N/A	DEAD SET - RELAY DOES CLICK	CHECK/REPLACE Q711 (2SC4589-P/N# 2315272),R748 (1.1 - P/N# 0119722) AND R792 (0.5 - P/N# 0119838)
HITACHI	31KX39K	N/A	CHANNELS 16 & 17 HAVE POOR PICTURE AND ALOT OF WHITE GLITTERY STREAKS - POPPING IN SPEAKERS WHILE SET IS ON	ADD 10-33pF TO B-C OF Q854,Q855,Q856 - CUT FOIL BETWEEN ZD804-Q854B,ZD805-Q855B AND ZD806-Q856B AND ADD 100 1/16w
HITACHI	31KX41	N/A	DEAD SET - RELAY DOES CLICK	CHECK/REPLACE Q711 (2SC4589-P/N# 2315272),R748 (1.1 - P/N# 0119722) AND R792 (0.5 - P/N# 0119838)
HITACHI	CR310	N/A	NO VERT SWEEP	TR35 & TR37 SHORTED OR OPEN
HITACHI	CT13C7	N/A	DEAD SET	CHECK/REPLACE R951 FOR OPEN
HITACHI	CT1912	N/A	BLACK BAR NEAR TOP OF SCREEN AND DISAPPEARS AFTER WARM	CHECK/REPLACE C608 (22uF @ 160v)
HITACHI	CT1912	N/A	BLACK BAR OR SHORT VERT. SWEEP AT TOP OF SCREEN	CHECK/REPLACE C608
HITACHI	CT1912	N/A	HORZ. LINES AT THE TOP OF SCREEN	CHECK/REPLACE C608 (22uF @ 160v)
HITACHI	CT19D5	N/A	DEAD SET-NO 12V STANDBY VOLTAGE	CHECK CO109 (REMOTE RCVR) AND R951 (MAIN BD.)
HITACHI	CT2087	G7XU2	DEAD SET	CHECK Q702,R728
HITACHI	CT2087	G7XU2	SET GOES INTO SHUTDOWN AT TURN ON	CHECK IC901
HITACHI	CT2087	G7XU2	NO VERT SWEEP	CHECK R730,D706,IC601
HITACHI	CT2087	G7XU2	SHORT VERT SWEEP	CHECK C726,C609
HITACHI	CT2087	G7XU2	DEAD SET	CHECK T951 FOR OPEN PRIMARY
HITACHI	CT2087	G7XU2	DARK SMEARY PIX-ESPECIALLY ON THE LEFT SIDE	CHECK C731,R734,D712
HITACHI	CT2088	G7XU3	NO VERT SWEEP	CHECK R730,D706,IC601
HITACHI	CT2088	G7XU3	DEAD SET	CHECK T951 FOR OPEN PRIMARY
HITACHI	CT2088	G7XU3	DEAD SET	CHECK Q702,R728
HITACHI	CT2088	G7XU3	DARK SMEARY PIX-ESPECIALLY ON THE LEFT SIDE	CHECK C731,R734,D712
HITACHI	CT2088	G7XU3	SET SHUTS DOWN AT TURN ON	CHECK IC901
HITACHI	CT2088	G7XU3	SHORT VERT SWEEP	CHECK C726,C609
HITACHI	CT2250	N/A	DEAD SET AND RELAY WILL NOT CLICK	CHECK/REPLACE Q951,ZD951 AND R953
HITACHI	CT2250	N/A	BRIGHT SCREEN WITH RETRACE LINES	CHECK/REPLACE Q301 FOR SHORT
HITACHI	CT2261	N/A	BRIGHT SCREEN WITH RETRACE LINES	CHECK/REPLACE Q301 FOR SHORT
HITACHI	CT2261	N/A	DEAD SET AND RELAY WILL NOT CLICK	CHECK/REPLACE Q951,ZD951 AND R953
HITACHI	CT2532	N/A	LINES AT TOP OF PICTURE	CHECK/REPLACE C604
HITACHI	CT2647	N/A	DEAD SET - RAW B+ IS GOOD	CHECK/REPLACE R911 FOR OPEN
HITACHI	CT4580	VP7X	NO RASTER AND NO SOUND - F903 AND F904 AND HORZ. OUTPUT BLOW WHEN SET IS TURNED ON	INSTALL KIT (P/N# 4861842)
HITACHI	CT5081	VP7X	NO RASTER AND NO SOUND - F903 AND F904 AND HORZ. OUTPUT BLOW WHEN SET IS TURNED ON	INSTALL KIT (P/N# 4861842)
HITACHI	CT5582	VP7X	NO RASTER AND NO SOUND - F903 AND F904 AND HORZ. OUTPUT BLOW WHEN SET IS TURNED ON	INSTALL KIT (P/N# 4861842)
JC PENNEY	6850390	CKA50ZH	NO VERTICAL SWEEP	CHECK/REPLACE R308 (1 1/2w.) AND D302 (ECG552)
JC PENNEY	6852051J	CTC120	BLACK RASTER - NO SOUND - DOES HAVE HIGH VOLTAGE - HOUR GLASS SHAPED PICTURE WILL COME ON AFTER 1/2 HOUR	CHECK/REPLACE C677 IN 'MTT' MODULE
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	VERTICAL STRETCHED OUT (OVERSIZED)	CHECK/REPLACE U401
JC PENNEY	6852051J	CTC120	DEAD SET	CHECK CR625 IN THE MTT004 MODULE FOR LEAKAGE
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	DISTORTED AND WEAK AUDIO	C208,C209,L201---ALIGN L201 FOR BEST SOUND
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	BRIGHT PICTURE WITH RETRACE LINES AND HORZ. PULL	CHECK/REPLACE C105
JC PENNEY	6852051J	CTC120	DEAD SET WITH TIC-TIC	CHECK/REPLACE C417
JC PENNEY	6852051J	CTC120	AUDIO HAS NOISE AT LOW VOLUME	CHECK/REPLACE C205 (.01uF)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	HOUR GLASS SHAPED PIX	CHECK/REPLACE 600/30uF CAPACITOR
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	BLACK RASTER - NO SOUND - DOES HAVE HIGH VOLTAGE - HOUR GLASS SHAPED PICTURE WILL COME ON AFTER 1/2 HOUR	CHECK/REPLACE C677 IN 'MTT' MODULE
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	SOUND DRIFTS OR QUAD COIL OUT OF ADJUSTMENT	CHECK/REPLACE L201 (143834)
JC PENNEY	6852051J	CTC120	SIDES BOWED IN - PINCUSHION PROBLEM	CHECK/REPLACE Q1 ANS Q2 ON PINCUSHION MODULE
JC PENNEY	6852051J	CTC120	HOUR GLASS SHAPED PIX	CHECK/REPLACE 600/30uF CAPACITOR
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	VERTICAL STRETCHED OUT (OVERSIZED)	CHECK/REPLACE U401
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	INT. VERT COLLAPSE	RESOLDER CONNECTIONS ON THE VERT HEIGHT CTRL.
JC PENNEY	6852051J	CTC120	SHUTSDOWN AFTER 2-5 MINUTES	CHECK/REPLACE CR406
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO VERTICAL SWEEP	CHECK/REPLACE R509 (830012) AND CR504 (119597)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	VERTICAL STRETCHED OUT (OVERSIZED)	CHECK/REPLACE U401
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	VERT. DARK LINES ON LEFT SIDE OF SCREEN	CHECK R436 FOR INCREASE IN VALUE
JC PENNEY	6852051J	CTC120	SHUTSDOWN AFTER 2-5 MINUTES	CHECK/REPLACE CR406
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	INTERMITTENT NO START-UP - ONLY HAS A TIC TIC	CHECK/REPLACE R426 (176284)
JC PENNEY	6852051J	CTC120	BLACK RASTER - NO SOUND - DOES HAVE HIGH VOLTAGE - HOUR GLASS SHAPED PICTURE WILL COME ON AFTER 1/2 HOUR	CHECK/REPLACE C677 IN 'MTT' MODULE
JC PENNEY	6852051J	CTC120	NO PIX-NO SOUND-HV NORMAL-NO LED READOUT	CHECK/RESOLDER CONNECTIONS ON L104 OR CHECK R119 FOR OPEN
JC PENNEY	6852051J	CTC120	VERTICAL STRETCHED OUT (OVERSIZED)	CHECK/REPLACE U401
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	INTERMITTENT 2' HIGH PULLING OR TEARING IN PICTURE	CHECK/REPLACE IC U401
JC PENNEY	6852051J	CTC120	BRIGHT PICTURE WITH RETRACE LINES AND HORZ. PULL	CHECK/REPLACE C105
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	VERTICAL STRETCHED OUT (OVERSIZED)	CHECK/REPLACE U401
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	INTERMITTENT COLOR AND BRIGHTNESS	CHECK/RESOLDER CONNECTIONS ON Q302
JC PENNEY	6852051J	CTC120	RETRACE LINES AT THE TOP OF PICTURE	CHECK/REPLACE C506
JC PENNEY	6852051J	CTC120	INTERMITTENT 2' HIGH PULLING OR TEARING IN PICTURE	CHECK/REPLACE IC U401
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)
JC PENNEY	6852051J	CTC120	LOW VOLUME AND/OR DISTORTED AUDIO	ALIGN L201 OR REPLACE IF NECESSARY
JC PENNEY	6852051J	CTC120	NO LED READOUT AND WILL NOT TUNE ANY CHANNELS	CHECK/RESOLDER ALL CONNECTIONS ON L104 (MAY BE MARKED AS L401 ON SOME CHASSIS)

LAMSON Digital Electronics Address: 1324-1326 Jose Abad Santos Ave.,Manila, Philippines TEL:00632-2559675  TEL/FAX:00632-2568130 Cellular:0922-8867809 0922-8867810 E-mail:lamsonsm@gmail.com    YAHOO MESSENGER ID : myrna_q_ng or saishu_ng SKYPE ID: myrna_q_ng or saishu_ng (old) Lamson Importers & Exporters Trading <We will not be using the old address and phone no. in the future. Please be noted when calling us, sending letters, parcels or buying our products> OLD Address: 681 Carmen Building, Ronquillo St. Quiapo, Manila, Philippines Phone:00632-7332936 7332940 Fax:00632-7332940 E-mail: