TV REPAIR TIPS PAGE 21

MAKE	MODEL	CHASSIS	SYMPTOM	CURE
RCA	GMR855	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR855	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR855	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR855	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR855	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR855	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR859	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR859	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR859	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR859	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR859	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR859	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR859	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR859	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR860	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR860	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR860	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR860	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR860	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR860	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR860	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR860	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR868	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR868	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR868	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR868	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR868	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR868	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR868	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR868	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR885	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR885	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR885	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR885	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR885	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR885	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR885	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR885	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	VERT HEIGHT STRETCHED AND CONTROL HAS NO EFFECT	CHECK/REPLACE C510 FOR LEAKAGE
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	DEAD SET - NO START UP	CHECK/REPLACE CR10
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	VIDEO HAS SIGNS OF RINGING OR GHOST	CHECK/REPLACE R4209 (SHARPNESS CONTROL)
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	VERTICAL IS STRETCHED	CHECK/REPLACE C423 FOR INCREASE IN VALUE
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	SLOW TICKING AND NO SOUND OR PICTURE	CHECK/REPLACE C425 FOR SHORT
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	RETRACE LINES AT THE TOP OF PICTURE	CHECK/REPLACE C506
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	RINGING IN THE PICTURE-LOW BRIGHTNESS-VERTICAL BARS ON THE LEFT SIDE OF PICTURE-HORZ LINES OF NOISE IN VIDEO	CHECK/REPLACE IC U701 (152051)
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	OSD SMEARED	CHECK/RESOLDER CONNECTIONS ON R667 (SMD)
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	REPEATED HORZ. OUTPUT FAILURE	CHECK/REPLACE Q402,R424,R426,T401,C423,C425
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	AUDIO IS MOTOR BOATING	CHECK/REPLACE U301 (IF PROCESSOR)
RCA	GMR895HR	CTC130	REMOTE WORKS INTERMITTENTLY AND VOLUME GOES TO MAXIMUM INTERMITTENTLY	CHECK/RESOLDER CONNECTIONS IN 'MTT' TUNER CONTROL MODULE WHERE CONNECTORS ARE SOLDERED TO BOARD
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	FLASHES ON/OFF WHEN TURNED ON - MAY CYCLE ON/OFF RAPIDLY	CHECK/REPLACE CR105
RCA	GMR895HR	CTC130	DARK RASTER WITH VERY LOW VOLUME - PICTURE TRIES TO SEARCH BUT CHANNEL NUMBER REMAINS THE SAME	CHECK/REPLACE C677 IN 'MTT004' MODULE
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	PIX NORMAL BUT AUDIO IS DISTORTED ON SOME CHANNELS	CHECK/REPLACE Q101 (STEREO MODELS ONLY)
RCA	GMR895HR	CTC130	REMOTE WORKS INTERMITTENTLY AND VOLUME GOES TO MAXIMUM INTERMITTENTLY	CHECK/RESOLDER CONNECTIONS IN 'MTT' TUNER CONTROL MODULE WHERE CONNECTORS ARE SOLDERED TO BOARD
RCA	GMR895HR	CTC130	DEAD SET	CHECK/REPLACE CR7
RCA	GMR895HR	CTC130	PINCUSHION NOT WORKING	CHECK/REPLACE Q2 AND C425 FOR LEAKY
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	DARK RASTER OR FILAMENTS NOT LIT	CHECK/REPLACE R5013
RCA	GMR895HR	CTC130	DARK RASTER WITH VERY LOW VOLUME - PICTURE TRIES TO SEARCH BUT CHANNEL NUMBER REMAINS THE SAME	CHECK/REPLACE C677 IN 'MTT004' MODULE
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	HAS HORZ. SQUEAL WITH A DIM AND ODD LOOKING RASTER	CHECK/REPLACE C404
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	DEAD SET	CHECK/REPLACE CR7
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TURNS ON AND OFF	CHECK/REPLACE C11 IN REGULATOR CIRCUIT
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	DEAD SET - BLOWS FUSE - Q401 SHORTED	CHECK/REPLACE SCR101,Q401,FUSE
RCA	GMR895HR	CTC130	VERTICAL JITTER ON VCR OR SOME CABLE SYSTEMS	ADD DIODE (164717) WITH ANODE TO THE EMITTER OF Q305 AND CATHODE TO A 30k. ATTACH OTHER END OF RESISTOR TO BASE Q305
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TURNS ON AND OFF	CHECK/REPLACE C11 IN REGULATOR CIRCUIT
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	DEAD SET - NO START UP	CHECK/REPLACE CR10
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	DARK RASTER OR FILAMENTS NOT LIT	CHECK/REPLACE R5013
RCA	GMR895HR	CTC130	INTERMITTENT START-UP	CHECK/REPLACE R16 (0.5 ohm) FOR INCREASE IN VALUE
RCA	GMR895HR	CTC130	INTERMITTENT AUDIO/PIX (MAY TAKE DAYS TO OCCUR)	CHECK/REPLACE C423 FOR INCREASE IN VALUE
RCA	GMR895HR	CTC130	HAS HORZ. SQUEAL WITH A DIM AND ODD LOOKING RASTER	CHECK/REPLACE C404
RCA	GMR895HR	CTC130	POOR PINCUSHION - SIDES OF PIX BOWED	CHECK/REPLACE Q1 AND Q2 ON PINCUSHION MODULE
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	FLASHING BLACK LINES APPEARS ON PICTURE AFTER WARM-UP	CHECK/REPLACE U701
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	FLASHING BLACK LINES APPEARS ON PICTURE AFTER WARM-UP	CHECK/REPLACE U701
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	NO OSD	CHECK/REPLACE C1 ON MSD002 MODULE
RCA	GMR895HR	CTC130	LOW BRIGHT WITH HORZ. LINES - MAY HAVE JAIL BARS ON LEFT - PIX PULSATES ON SCENE CHANGES	CHECK/REPLACE IC U701
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	DEAD SET	CHECK/REPLACE CR7
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	DEAD SET - HORZ. OUT TO GRD. IS SHORTED	CHECK/REPLACE C425 FOR SHORT
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	PICTURE STRETCHED HORZ. APPROX. 1'	CHECK/REPLACE C423 FOR INCREASE IN VALUE
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	WHEN TURNED ON, TV PULSES ON/OFF 2 TIMES OR MORE THEN COMES ON OK - USUALLY WHEN SET IS COLD	CHECK/REPLACE C7 AND C11 IN POWER SUPPLY
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	INTERMITTENT SHUTDOWN--ONLY ACTS UP 1-2 TIMES A WEEK	CHECK CONNECTIONS ON L8 OFF OF THE CATHODE OF CR10 (VIPUR POWER SUPPLY)
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	SET TICKS VERY SLOW BUT NO START UP	CHECK R120 FOR OPEN
RCA	GMR895HR	CTC130	LOOKS LIKE NO INTERLACE BUT HAS FULL VERT SWEEP	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	LINES IN PIX - HORZ. SYNC UNSTABLE - INTERMITTENT HORZ. OUTPUT XSTR. FAILURE	CHECK/REPLACE C406 FOR CHANGE IN VALUE
RCA	GMR895HR	CTC130	WON'T TURN ON INTERMITTENT--IF IT TURNS ON,PIX WOULD PLAY OK FOR A FEW MINUTES THEN GET DARK STREAKS THRU PIX	CHECK CR405 FOR BREAKDOWN
RCA	GMR895HR	CTC130	VERY THIN BLACK HORZ. BARS FROM TOP TO BOTTOM IN PIX.	CHECK R507 (200k) FOR OPEN
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	SLOW TICKING AND NO SOUND OR PICTURE	CHECK/REPLACE C425 FOR SHORT
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	OSD SMEARED	CHECK/RESOLDER CONNECTIONS ON R667 (SMD)
RCA	GMR895HR	CTC130	NO COLOR	CHECK/REPLACE C826 FOR LEAKAGE
RCA	GMR895HR	CTC130	TURN SET ON---POWER PULSATES ON/OFF	CHECK CR406 FOR LEAKAGE
RCA	GMR895HR	CTC130	APPROX. 1' VERT FOLDOVER AT TOP OF SCREEN	CHECK R506 FOR OPEN
RCA	GMR895HR	CTC130	SIDE PULLED IN--WIDTH CTRL HAS NO EFFECT	CHECK R2 (10k OFF OF WIDTH CTRL) FOR OPEN
RCA	GMR895HR	CTC130	NO OSD	CHECK/REPLACE C1 ON MSD002 MODULE
RCA	GMR895HR	CTC130	WHEN TURNED ON, TV PULSES ON/OFF 2 TIMES OR MORE THEN COMES ON OK - USUALLY WHEN SET IS COLD	CHECK/REPLACE C7 AND C11 IN POWER SUPPLY
RCA	GMR899	N/A	CLOCK RUNS TOO FAST	REMOVE C314
RCA	GMR899	N/A	LOOSES COLOR WHEN USED WITH A VCR-OFF THE AIR SIGNAL FINE	CHECK/REPLACE C2812 AND C2806
RCA	GPR2635	CTC140	NO HIGH VOLTAGE-SQUEAL FROM POWER SUPPLY	RESOLDER CONNECTIONS ON SIP DIODE BOARD (ESPC DIODES)
RCA	GPR2635T	CTC140	INTERMITTENT LINES AND FLASHING IN THE VIDEO	CHECK/RESOLDER CONNECTIONS ON Q2300 (NEAR TUNER)
RCA	GPR2643	CTC140	NO SOUND OR PIX BUT HAS HIGH VOLTAGE AND Q2100 RUNS HOT	CHECK/REPLACE CR2300 (9.1v ZENER)
RCA	GPR2643	CTC140	TEARING,FLASHING AND ROLLING IN THE PICTURE	CHECK/RESOLDER CONNECTIONS ON L2307 TO PIN 7 OF U2300
RCA	GPR2643	CTC140	DEAD SET BUT LED LIGHTS	CHECK/REPLACE R4101 (2.2k)
RCA	GPR2643	CTC140	GRAINY,GHOSTY PICTURE - 12VOLT SUPPLY DOWN TO 9.5 VOLTS	CHECK/REPLACE CR2100
RCA	GPR2643	CTC140	DEAD SET BUT LED LIGHTS COME ON WHEN POWER BUTTON PUSHED BUT WON'T SWITCH OFF	CHECK/REPLACE CR4104
RCA	GPR2649	CTC140	REMOTE WILL TURN TV ON BUT AFTER THAT, REMOTE INOPERATIVE	CHECK/REPLACE C3301
RCA	GPR2740	CTC140	INTERMITTENT VERY SNOWY PICTURE AND AUDIO NOISE	CHECK/REPLACE L2302
RCA	GPR2740	CTC140	INTERMITTENT PICTURE - NO PICTURE - DARK PICTURE - SMEARY PICTURE OR PICTURE FLICKERS	REMOVE GLUE FROM AROUND U2300
RCA	GPR2740T	CTC140	PICTURE SCRAMBLES AFTER A FEW MINUTES OR SEVERE VIDEO NOISE - AUDIO IS NORMAL	CHECK/RESOLDER CONNECTIONS ON IC U330 IN THE 'IF' CIRCUIT
RCA	GPR2747	CTC140	INTERMITTENT PICTURE - NO PICTURE - DARK PICTURE - SMEARY PICTURE OR PICTURE FLICKERS	REMOVE GLUE FROM AROUND U2300
RCA	GPR2747	CTC140	INTERMITTENT VERY SNOWY PICTURE AND AUDIO NOISE	CHECK/REPLACE L2302
RCA	GPR798	CTC120	INTERMITTENT 2' HIGH PULLING OR TEARING IN PICTURE	CHECK/REPLACE IC U401
RCA	GPR798	CTC120	VERTICAL STRETCHED OUT (OVERSIZED)	CHECK/REPLACE U401
RCA	GPR849	CTC130	DEAD SET - HORZ. OUT TO GRD. IS SHORTED	CHECK/REPLACE C425 FOR SHORT
RCA	J20221	CTC166	NO AUDIO	CHECK/REPLACE C1211 (SMD)
RCA	JPR985	CTC131	INTERMITTENT AUDIO BUZZ,LIKE QUAD COIL MISADJUSTED-THERMAL	CHECK C11 IN SOUND IF CIRCUIT ON PWSB001 CBA
RCA	P46000	N/A	PIX JITTERS VERTICALLY	CHECK/REPLACE R3052 (VERT HOLD CTRL)
RCA	P46000	N/A	DEAD SET	CHECK/REPLACE Q902,Q904,F904,C732 AND HIGH VOLTAGE BLOCK.
RCA	P46000	N/A	NO ON SCREEN DISPLAY	CHECK CONNECTIONS ON 'SA' PLUG PIN #1 FOR HORZ. SYNC. SIGNAL
RCA	P46100	CTC169	AUDIO HISS/AUDIO POP/NON-LINEAR VOLUME CONTROL	CHECK/REPLACE AUDIO CIRCUIT BOARD (206000) AND U3101 (206395)
RCA	P46100	CTC169	DEAD SET - NO ATTEMPT TO START	CHECK/REPLACE Q4101,U4101,CR4101 AND Q4401
RCA	P46100	CTC169	DEAD SET - NO ATTEMPT TO TURN ON	CHECK/REPLACE T4401 AND Q4401
RCA	P46101	CTC169	NO AUDIO BUT VOLUME LEVEL DOES CHANGE AND AMPLIFIER IS WORKING ON BOTH CHANNELS	CHECK/REPLACE U1502 (P/N# 176226) - CAN BE ISOLATED BY SHORTING PINS 15 TO 11 AND PINS 2 TO 6
RCA	P46101	CTC169	PICTURE PULLED IN ON ALL (4) SIDES - LOW B+ AND NO COLOR	CHECK/REPLACE Q4105 (P/N# 143802) OR ECG159 AND Q4107 (P/N# 146847) OR ECG123AP
RCA	P46130	CTC169	HORZ. CONVERGENCE WAY OFF ON ALL THREE CRT'S	CHECK/REPLACE T7001
RCA	P46130	CTC169	BLUE HORZ. CONVERGENCE OFF OR WON'T ADJUST	CHECK/REPLACE Q7025,Q7028,Q7029 AND R7098
RCA	P46150	CTC169	INTERMITTENT COLOR OR NO COLOR	CHECK/REPLACE Q6405
RCA	P46150	CTC169	SET WILL NOT TURN ON	CHECK/REPLACE CR4101
RCA	P46150	CTC169	PICTURE IS CLOSED IN ON THE TOP AND BOTTOM ABOUT 1-2 INCHES	CHECK/REPLACE T4101 (OPENING UP INTERMITTENTLY)
RCA	P46150	CTC169	INTERMITTENT SHUT DOWN WHEN POWERED UP - FOR 2 TO 3 MINUTES AFTER THAT, UNIT WILL STAY ON BUT HAS NO HORZ. SYNC.	CHECK/REPLACE R4144 (1.8 ohm 1/2 watt)
RCA	P46150	CTC169	AUDIO HISS/AUDIO POP/NON-LINEAR VOLUME CONTROL	CHECK/REPLACE AUDIO CIRCUIT BOARD (206000) AND U3101 (205995)
RCA	P46150	CTC169	NO VIDEO AND NO OSD	CHECK/REPLACE CR7061 (SHORTED)
RCA	P46150	CTC169	IMMEDIATE OVER-CURRENT SHUTDOWN	CHECK/REPLACE R4704 (HIGH VOLTAGE BLOCK)
RCA	P46150	CTC169	NO HIGH VOLTAGE AND NO SOUND - POWER SUPPLY IS OK	CHECK/REPLACE R4311 IN BASE OF Q4302
RCA	P46150	CTC169	SIDES OF PICTURE IS BOWED AND ALSO PIP PICTURE IS BOWED	CHECK/REPLACE CR4402
RCA	P46150	CTC169	BLUE HORZ. CONVERGENCE OFF OR WON'T ADJUST	CHECK/REPLACE Q7025,Q7028,Q7029 AND R7098
RCA	P46150	CTC169	HORZ. CONVERGENCE WAY OFF ON ALL THREE CRT'S	CHECK/REPLACE T7001
RCA	P46159	CTC169	BLUE HORZ. CONVERGENCE OFF OR WON'T ADJUST	CHECK/REPLACE Q7025,Q7028,Q7029 AND R7098
RCA	P46159WK	CTC169	PICTURE FLASHES ON-OFF,BOWED IN ON THE SIDES AND THE CONVERGENCE IS OFF	CHECK/REPLACE Q7036 AND R7119
RCA	P46160	CTC169	NO VIDEO AND NO OSD	CHECK/REPLACE CR7061 (SHORTED)
RCA	P46160	CTC169	INTERMITTENT COLOR OR NO COLOR	CHECK/REPLACE Q6405
RCA	P46160	CTC169	BLUE HORZ. CONVERGENCE OFF OR WON'T ADJUST	CHECK/REPLACE Q7025,Q7028,Q7029 AND R7098
RCA	P46160	CTC169	HORZ. CONVERGENCE WAY OFF ON ALL THREE CRT'S	CHECK/REPLACE T7001
RCA	P46731	CTC169	SHADING DIFFERENCE ON SCREEN AND A 'V' SHAPED AREA APPEARS DURING DARK SCENES	INSTALL KIT (P/N# 226701)
RCA	P52150	CTC169	AUDIO HISS/AUDIO POP/NON-LINEAR VOLUME CONTROL	CHECK/REPLACE AUDIO CIRCUIT BOARD (206000) AND U3101 (205995)
RCA	P52151	CTC169	RF INTERFERENCE ON SUPER BAND	CHECK/REPLACE Q8128
RCA	P52730	CTC169	DEAD SET - NO ATTEMPT TO START	CHECK/REPLACE Q4101,U4101,CR4101 AND Q4401
RCA	P60152	CTC169	INTERMITTENT COLOR ON MAIN PICTURE AND INTERMITTENT COLOR ON PIP PICTURE	REMOVE GLUE FROM UNDER C2803 AND RESOLDER U8301
RCA	PMR450	CTC132	BOWED IN ON BOTH SIDES AND POOR CONVERGENCE	CHECK/REPLACE C446
RCA	PMR450	CTC132	RASTER TAKES 30 MINUTES TO COME ON, AND WHEN IT DOES THE VETICAL SWEEP IS FOLDED AT THE TOP	CHECK/REPLACE C451 AND C452
RCA	PMR475	CTC132	RASTER TAKES 30 MINUTES TO COME ON, AND WHEN IT DOES THE VETICAL SWEEP IS FOLDED AT THE TOP	CHECK/REPLACE C451 AND C452
RCA	PMR475	CTC132	NO PICTURE	CHECK/REPLACE C451
RCA	PMR475	CTC132	BOWED IN ON BOTH SIDES AND POOR CONVERGENCE	CHECK/REPLACE C446
RCA	PS20110	CTC168	AUDIO HISS/AUDIO POP/NON-LINEAR VOLUME CONTROL	CHECK/REPLACE AUDIO CIRCUIT BOARD (205994) AND U3101 (206395)
RCA	PS27110	CTC169	AUDIO HISS/AUDIO POP/NON-LINEAR VOLUME CONTROL	CHECK/REPLACE AUDIO CIRCUIT BOARD (205994) AND U3101 (206395)
RCA	PS27113FB1	CTC169CL5	AUDIBLE MECHANICAL BUZZ THAT IS NOTICABLE IN A QUIET ROOM	CHECK/REPLACE CRT WITH NEW TYPE (P/N# 68EET38109) THIS PART REQUIRES TECHNICAL ASST. AUTH. FOR WARRANTY
RCA	PS27120W01	CTC169AG	AUDIO HISS/AUDIO POP/NON-LINEAR VOLUME CONTROL	CHECK/REPLACE AUDIO CIRCUIT BOARD (205994) AND U3101 (205995)
RCA	PS27123FB1	CTC169CG5	AUDIBLE MECHANICAL BUZZ THAT IS NOTICABLE IN A QUIET ROOM	CHECK/REPLACE CRT WITH NEW TYPE (P/N# 68EET38109) THIS PART REQUIRES TECHNICAL ASST. AUTH. FOR WARRANTY
RCA	PS27150	CTC169	BLACK PICTURE WITH WHITE DASHES FLOATING THRU IT - OSD AND AUDIO ARE BOTH OK	CHECK/REPLACE Y8901
RCA	PS27150	CTC169	AUDIO HISS/AUDIO POP/NON-LINEAR VOLUME CONTROL	CHECK/REPLACE AUDIO CIRCUIT BOARD (205998) AND U3101 (205997)
RCA	PS27150	CTC169	DEAD SET - POWER LED CYCLES 3 TIMES THEN DEAD	CHECK/REPLACE CR4119
RCA	PS27153FX1	CTC169CH5	AUDIBLE MECHANICAL BUZZ THAT IS NOTICABLE IN A QUIET ROOM	CHECK/REPLACE CRT WITH NEW TYPE (P/N# 68EET38109) THIS PART REQUIRES TECHNICAL ASST. AUTH. FOR WARRANTY
RCA	PS31150	CTC169	AUDIO HISS/AUDIO POP/NON-LINEAR VOLUME CONTROL	CHECK/REPLACE AUDIO CIRCUIT BOARD (205998) AND U3101 (205997)
RCA	PS35150	CTC169	INTERMITTENT SHUTDOWN (USUALLY WITH HIGH HUMIDITY)	CHECK/REPLACE FOCUS/G2 RESISTOR ASSEMBLY
RCA	PS35652	CTC169	IMMEDIATE OVER-CURRENT SHUTDOWN	CHECK/REPLACE R4704 (HIGH VOLTAGE BLOCK)
RCA	PS35652	CTC169	PICTURE IS CLOSED IN ON THE TOP AND BOTTOM ABOUT 1-2 INCHES	CHECK/REPLACE T4101 (OPENING UP INTERMITTENTLY)
RCA	PS35652	CTC169	NO HIGH VOLTAGE AND NO SOUND - POWER SUPPLY IS OK	CHECK/REPLACE R4311 IN BASE OF Q4302
RCA	PS35652	CTC169	SET WILL NOT TURN ON	CHECK/REPLACE CR4101
RCA	PS35652	CTC169	INTERMITTENT SHUT DOWN WHEN POWERED UP - FOR 2 TO 3 MINUTES AFTER THAT, UNIT WILL STAY ON BUT HAS NO HORZ. SYNC.	CHECK/REPLACE R4144 (1.8 ohm 1/2 watt)
RCA	PS35652	CTC169	SIDES OF PICTURE IS BOWED AND ALSO PIP PICTURE IS BOWED	CHECK/REPLACE CR4402
RCA	PS35652	CTC169	PICTURE LOOSES VIDEO INFORMATION OR GOES DARK INTERMITTENTLY	CHECK/REPLACE DL2701 FOR INTERMITTENT OPENING
RCA	RMV2730	CTC140	DEAD SET	CHECK/REPLACE C4403
RCA	S20522	CTC166	REMOTE SECTION OF SET IS DEAD - 5v STAND-BY IS MISSING AT CR3402 OR LOW	CHECK/REPLACE U3401 (IR PREAMP IC)
RCA	VJM2022	CTC121	NO VERTICAL DEFLECTION	CHECK/REPLACE R502 FOR OPEN
RCA	X13101	TX825	PICTURE PULSATES ON/OFF	CHECK/REPLACE CP31 (330uF @ 200)
RCA	X13101	TX825	DEAD SET - NO BLOWN FUSES	CHECK/REPLACE DP11 (P/N# 198590) AND DP14 (P/N# 220636)
RCA	X13101	TX825	DEAD SET - 5 VOLT STANDBY SUPPLY IS DOWN TO 2.5 VOLTS	CHECK/REPLACE TP15 (P/N# 198752)
RCA	X13131	CTC145	SET COMES ON AND SHUTS DOWN IMMEDIATELY	CHECK/RESOLDER CONNECTIONS ON T4401
RCA	X13131	CTC145	VERTICAL FOLDOVER 1/3 WAY DOWN FROM THE TOP AND BOTTOM WAS PULLED UP - TOP STRETCHED	CHECK/REPLACE C4505
RCA	X13131	CTC145	TV CYCLES ON/OFF WHEN POWER BUTTON PRESSED	CHECK/REPLACE C3126 FOR LEAKAGE
RCA	X13131	CTC145	NO VIDEO OR OSD	CHECK/REPLACE Q2706
RCA	X13135	CTC145	DEAD - RELAY DOES CLICK	CHECK/RESOLDER CONNECTIONS ON T401
RCA	X13144	TX82	DEAD SET	CHECK/REPLACE RP36 (47k @ 1w)
RCA	X13144	TX82	NO PICTURE BUT SOUND OK - NO CRT FILAMENTS	CHECK/REPLACE RV127
RCA	X13144	TX82	DEAD SET	CHECK/REPLACE DP18 AND RP68
RCA	X13152	TX81	DEAD SET	CHECK/REPLACE CP08
RCA	X13152	TX81	NO SOUND BUT PICTURE IS NORMAL	CHECK/REPLACE LP03
RCA	X13154	TX82	NO PICTURE - SOUND OK - MISSING CRT FILAMENTS	CHECK/REPLACE RP50
RCA	X13154	TX82	DEAD SET	CHECK/REPLACE CR14
RCA	X13154	TX82	DEAD SET	CHECK/REPLACE CP01 (100uF @ 35v)
RCA	X13154	TX82	DEAD SET	CHECK/REPLACE CP15,FP01,TP05,TP06,TP10,DP32,RP50
RCA	X20131	CTC146	BLACK SCREEN--BRIGHTNESS CTRL. HAS NO EFFECT	CHECK R2715 FOR OPEN
RCA	X20131	CTC146	NO PIX-NO OSD-HV OK AND SOUND OK	CHECK FOR DEFECTIVE SCREEN/FOCUS CONTROL
RCA	X20133	CTC146	NO PIX-NO OSD-HV OK AND SOUND OK	CHECK FOR DEFECTIVE SCREEN/FOCUS CONTROL
RCA	X20133	CTC146	BLACK SCREEN--BRIGHTNESS CTRL. HAS NO EFFECT	CHECK R2715 FOR OPEN
RCA	X20161	CTC146	BLACK SCREEN--BRIGHTNESS CTRL. HAS NO EFFECT	CHECK R2715 FOR OPEN
RCA	X20161	CTC146	NO PIX-NO OSD-HV OK AND SOUND OK	CHECK FOR DEFECTIVE SCREEN/FOCUS CONTROL
RCA	X20162	CTC156	NO COLOR	CHECK/REPLACE C2817
RCA	X20163	CTC146	BLACK SCREEN--BRIGHTNESS CTRL. HAS NO EFFECT	CHECK R2715 FOR OPEN
RCA	X20163	CTC146	NO PIX-NO OSD-HV OK AND SOUND OK	CHECK FOR DEFECTIVE SCREEN/FOCUS CONTROL
RCA	X20323	CTC148	DEAD SET - NO ATTEMPT TO START UP	CHECK/REPLACE Q4301 OPEN
RCA	X20343	CTC156	GREEN SCREEN WITH RETRACE LINES - DISCONNECTING OSD CAUSES SET TO WORK NORMAL WITHOUT ON-SCREEN	CHECK/REPLACE CR3601 FOR LEAKY OR CHANGE IN VALUE
RCA	X25103	CTC177	NO VERTICAL SWEEP - MISSING 24v SUPPLY FROM FLYBACK	CHECK/RESOLDER CONNECTIONS ON PIN #10 OF FLYBACK
RCA	X25144	CTC167	SMEARY VIDEO - OSD SMEARED TO THE POINT THAT IT'S NOT READABLE - REDUCING G1 WOULD IMPROVE BUT NOT ELIMINATE.	CHECK/REPLACE C4703
RCA	X25144	CTC167	OSD WINDOW COMES UP AS A BLACK BOX WITH NO GREEN LETTERING	CHECK/REPLACE Q5004 FOR E-B SHORT
RCA	X25144	CTC167	INTERMITTENT NO AUDIO OR LOW AUDIO	CHECK/RESOLDER CONNECTIONS ON L1204 OR REPLACE CF1201
RCA	X26023	CTC148	WHEN COLD, SET HAS POOR REGULATION AND HORZ. TEARING OR PIE CRUSTING	CHECK/REPLACE CR4709 FOR INTERMITTENT
RCA	X26059TK	CTC157	POWER TURNS ON/OFF CONTINUOUSLY - SET WILL RUN AT 80 V AC	CHECK/REPLACE CR4160 IF 5V SUPPLY IS OVER 5 VOLTS
REALISTIC	16231	N/A	MICROPROCESSOR LOCKS UP INTERMITTENTLY	CHECK/REPLACE X1001 (455KHz XTAL.)
SAMSUNG	6852540	CKA50ZH	NO VERTICAL SWEEP	CHECK/REPLACE R308 (1 1/2w.) AND D302 (ECG552)
SAMSUNG	C3104MA	K20	DEAD SET	CHECK/REPLACE R428
SAMSUNG	C3104MA	K20	NO COLOR	CHECK/REPLACE R217
SAMSUNG	C8120MA	K20	DEAD SET	CHECK/REPLACE R428
SAMSUNG	CT1388	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	CT1388	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	CT1388	K50S	AUDIO SYNC BUZZ	CHECK/REPLACE Z601
SAMSUNG	CT1388	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	CT1388	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	CT1388	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	CT1388R	K50U	NO PICTURE OR AN OVERLOADED PICTURE - SOUND HAS A BUZZ	CHECK/REPLACE IC101 (LA7520)
SAMSUNG	CT330TM	N/A	SMEARED VIDEO,HIGH BRIGHTNESS AND NO RETRACE LINES	CHECK/REPLACE L901
SAMSUNG	CT3312	K50UC	NO VERTICAL DEFLECTION AND LINE BOUNCES	CHECK/REPLACE R317
SAMSUNG	CT3312	K50UC	NO SYNC BUT SYNC APPEARS GOOD AT IC501 PIN 27	CHECK/REPLACE R302 FOR OPEN
SAMSUNG	CT3312	K50UC	MAXIMUM VOLUME THAT IS UNCONTROLLABLE	CHECK/REPLACE R936 FOR OPEN
SAMSUNG	CT3312	K50UC	POOR VERTICAL SYNC AND PICTURE STRETCHED	CHECK/REPLACE C307,R314
SAMSUNG	CT3312VC	K50UC	POWER ON IS INTERMITTENT	CHECK/REPLACE D911
SAMSUNG	CT3312VC	K50UC	TV TURNS ON AS SOON AS IT IS PLUGGED IN AND NO FUNCTIONS WORK.	CHECK/REPLACE D907
SAMSUNG	CT3312VC	K50UC	SHORT VERTICAL SWEEP	CHECK/REPLACE R316,C357 AND R315
SAMSUNG	CT3312VC	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	CT3312VC	K50UC	VERTICAL SHORT AT TOP AND BOTTOM	CHECK/REPLACE C356
SAMSUNG	CT3325JC	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	CT3325JC	K50UC	INTERMITTENT POWER ON	CHECK/REPLACE D911
SAMSUNG	CT3325JC	K50UC	NO CONTROL OVER THE CONTRAST	CHECK/REPLACE R210 FOR OPEN
SAMSUNG	CT3325JC	K50UC	VERTICAL STRETCHED AT TOP AND BOTTOM SHORT	CHECK/REPLACE R311
SAMSUNG	CT3325JC	K50UC	DEAD SET	CHECK/REPLACE R417 AND Q402
SAMSUNG	CT3325JC	K50UC	NO SYNC BUT SYNC APPEARS GOOD AT PIN 27 OF IC501	CHECK/REPLACE R302
SAMSUNG	CT3325JC	K50UC	NO OR INTERMITTENT VERTICAL SWEEP	CHECK/REPLACE C353 FOR OPEN OR CONNECTIONS ON C353
SAMSUNG	CT3325JC	K50UC	NO VERTICAL SWEEP	CHECK/REPLACE R309,R310
SAMSUNG	CT3325JC	K50UC	TV TURNS ON AS SOON AS IT IS PLUGGED IN	CHECK/REPLACE D907 SHORTED OR LEAKY
SAMSUNG	CT5012VC	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	CT5025JC	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	TC1388	K50S	INTERMITTENT SHUTDOWN/START-UP FOR NO APPARENT REASON BUT THE CHANNEL INDICATOR DOES STAY ON.	CHECK/REPLACE POWER RELAY
SAMSUNG	TC1388	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC1388	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC1388	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC1388	K50S	LINES AT TOP OF PICTURE	CHECK/REPLACE C354
SAMSUNG	TC1388	K50S	NO HORZ. OR VERT. SYNC	CHECK/REPLACE R302
SAMSUNG	TC2003	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC2003	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC2003	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC2003	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC2010	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC2010	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC2010	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC2010	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC2015	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC2015	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC2015	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC2015	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC2075S	N/A	DEAD SET OR NO VERTICAL OR IF D401/D301 FAIL	CHECK/REPLACE D401/D301 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC2540	25K50MS	BRIGHT BLUE SCREEN W/RETRACE LINES - OSD GRAPHICS SCRAMBLED	CHECK/REPLACE IC903 (P/N LP00948)
SAMSUNG	TC2540	25K50MS	BRIGHT BLUE SCREEN W/RETRACE LINES - OSD GRAPHICS SCRAMBLED	CHECK/REPLACE IC903 (P/N LP00948)
SAMSUNG	TC2540	25K50MS	NO O.S.D.	CHECK IC901,IC903,IC904
SAMSUNG	TC2540	25K50MS	INTERMITTENT SHUTDOWN AND LOSS OF VIDEO	CHECK AND RESOLDER TUNER GROUNDS AND HEAT SINK AT Q301.
SAMSUNG	TC2540	25K50MS	NO TUNER FUNCTIONS	CHECK/REPLACE D907
SAMSUNG	TC2540	H191	INTERMITTENT STEREO/MONO MUTE SITUATION	REMOVE R927
SAMSUNG	TC2540	H191	INTERMITTENT STEREO/MONO MUTE SITUATION	REMOVE R927
SAMSUNG	TC2540	K50	NO HORZ OR VERT SYNC	CHECK/REPLACE R302
SAMSUNG	TC2540	K50	SYNC BUZZ IN THE AUDIO	CHECK/REPLACE Z601
SAMSUNG	TC2540	K50	SHORT VERTICAL SWEEP	CHECK/REPLACE Q203 (7812 REGULATOR IC)
SAMSUNG	TC2540	K50	WILL NOT RECEIVE CABLE CHANNELS REGARDLESS OF WHICH POSITION AIR/STD/HRC SWITCH IS IN	CLEAN AIR/STD/HRC SWITCH - IT MAY BE NECESSARY TO DISASSEMBLE SWITCH TO CLEAN CONTACTS
SAMSUNG	TC2540	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC2540	K50S	NO VIDEO AUDIO AND TUNING OK	CHECK/REPLACE IC501
SAMSUNG	TC2540	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC2540	K50S	NO VERTICAL DEFLECTION	CHECK CONNECTIONS ON Q301,Q303
SAMSUNG	TC2540	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC2540	K50S	NO POWER ON MAY NOT TURN OFF	CHECK/CLEAN POWER RELAY CONTACTS
SAMSUNG	TC2540	K50S	NO OSD - NO TUNING - WON'T CHANNEL UP OR DOWN	CHECK/REPLACE IC904
SAMSUNG	TC2540	K50S	GREEN RASTER WITH SNOW RUSHING SOUND IN AUDIO	CHECK/REPLACE IC904 AND Q701
SAMSUNG	TC2540	K50S	SLICK RASTER WITH FOLD OVER	CHECK/REPLACE IC904
SAMSUNG	TC2540	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC2540	K50S	DEAD SET IN SHUT DOWN	CHECK R412
SAMSUNG	TC2540	K50S	NO VERTICAL SWEEP	CHECK/REPLACE C354 AND R308
SAMSUNG	TC2540	K50S	BLUE SCREEN W/ RETRACE (COULD BE GREEN OR RED)	IC904 DEFECTIVE
SAMSUNG	TC2540	K50S	LED READS '88'--SET WON'T RESPOND TO FUNCTIONS	CHECK R907 (270K) FAILSAFE ON uPROC IC
SAMSUNG	TC2540	K50S	DEAD SET	CHECK/REPLACE IC904
SAMSUNG	TC2540	K50S	INTERMITTENT CRT FILAMENT	CHECK/RESOLDER R525 & FBT PIN 9
SAMSUNG	TC2540	K50S	NO AUDIO AFTER REPL. MTS BOARD	CHECK ALIGNMENT OF L5112 (QUAD COIL)
SAMSUNG	TC2540	K50S	BLUE RASTER WITH RETRACE LINES	CHECK /REPLACE IC904
SAMSUNG	TC2540	K50S	NO SOUND OR VERT SWEEP	R413 OPEN ,CHECK D407
SAMSUNG	TC2540S	K50S	NO TUNER FUNCTIONS	CHECK/REPLACE D907
SAMSUNG	TC2550	K52MD	BRIGHTNESS FLUCUATES - PICTURE HAS A SMEARY LOOK - APPEARS THAT CRT IS GASSY	CHECK/REPLACE C702 FOR LEAKAGE (P/N# 31419-901-410)
SAMSUNG	TC2550	K52MD	NO SOUND BUT PICTURE IS FINE	CHECK/RESOLDER CONNECTIONS ON L812
SAMSUNG	TC2550S	K52MA	DEAD SET OR NO VERTICAL OR IF D401/D301 FAIL	CHECK/REPLACE D401/D301 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC2550S	K52MA	NO VERTICAL SWEEP	CHECK/REPLACE D301 (P/N# 32169-301-610) AND R301 (P/N# 31059-002-010)
SAMSUNG	TC2550S	K52MA	RETRACE LINES AT THE TOP OF SCREEN	CHECK/REPLACE C353,IC301 AND DZ31
SAMSUNG	TC2550S	K52MA	POWER SUPPLY TICKS	CHECK/REPLACE C823
SAMSUNG	TC2550S	K52MA	NO REMOTE CONTROL FUNCTIONS WORK AFTER IC901 IS REPLACED WITH P/N# 2109-110-0372	CLIP PIN #8 OF IC901 OFF - SOLDER A BRIDGE BETWEEN PIN#9 OF IC901 AND THE NOW EMPTY SOLDER PAD OF PIN #8
SAMSUNG	TC2550S	K52MA	DARK SCREEN WITH NO VIDEO	CHECK/REPLACE Q803
SAMSUNG	TC2750S	N/A	REPEATED FAILURE OF QP807 (REGULATOR IC) OR EXCESSIVE TEMPERATURE	ADD A .033uF @ 200 V CAPACITOR ACROSS PINS 1&5 OF REGULATOR IC AND REMOVE .0068 ON FOIL SIDE THAT IS ACROSS DP810.
SAMSUNG	TC2750S	N/A	DEAD SET WITH REGULATOR IC FAILURE	CHECK/REPLACE QP807,CP820,CP807,CP814,CP812,CP819,DP810
SAMSUNG	TC2750S	N/A	DEAD SET WITH REGULATOR IC FAILURE	CHECK/REPLACE QP807 AND ADD A .033uF ACROSS PINS 1&5 SAMSUNG P/N# 1509-335-3300 -REMOVE DP810
SAMSUNG	TC2750SX	N/A	NO POWER WITH THE RELAY ENERGIZED AND THE TIMER LIGHT IS BLINKING	CHANGE C451 TO 47uF @ 25v (P/N 1637-205-4705V) AND R401 TO A 12k @ 2w (P/N 1049-103-8206)
SAMSUNG	TC2770	K52MD	NO SOUND BUT PICTURE IS FINE	CHECK/RESOLDER CONNECTIONS ON L812
SAMSUNG	TC2770	K52MD	BRIGHTNESS FLUCUATES - PICTURE HAS A SMEARY LOOK - APPEARS THAT CRT IS GASSY	CHECK/REPLACE C702 FOR LEAKAGE (P/N# 31419-901-410)
SAMSUNG	TC2770S	K52MD	RETRACE LINES AT TOP OF SCREEN	CHECK/REPLACE D331
SAMSUNG	TC2770S	K52MD	DEAD SET OR NO VERTICAL OR IF D433/D434 FAIL	CHECK/REPLACE D433/D434 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC2770S	K52MD	NO VERTICAL SWEEP	CHECK/REPLACE D434 (P/N# 32167-201-110) AND R451 (P/N# 31059-401-000)
SAMSUNG	TC3190MA	K20	DEAD SET	CHECK/REPLACE R428
SAMSUNG	TC3203FB	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	TC3206FB	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	TC3320	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC3320	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC3320	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC3320	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC3323	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC3323	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC3323	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC3323	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC3643	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC3643	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC3643	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC3643	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC3823	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC3823	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC3823	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC3823	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC3823T	K50U	DEAD SET BUT RELAY CLICKS	CHECK/REPLACE R417 AND HORZ. OUTPUT XSTR.
SAMSUNG	TC3823T	K50U	NO PICTURE OR AN OVERLOADED PICTURE - SOUND HAS A BUZZ	CHECK/REPLACE IC101 (LA7520)
SAMSUNG	TC3833TB	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	TC3835	N/A	NO COLOR	CHECK/REPLACE R408
SAMSUNG	TC3836	N/A	DEAD SET - X901 WILL NOT OSCILLATE	CHECK/REPLACE R907
SAMSUNG	TC3836	N/A	NO REGULATION - WHEN SET IS TURNED ON,PIX IS DISTORTED AND SET HUMS	CHECK/REPLACE R806 FOR OPEN
SAMSUNG	TC3836T	K50UC	SEE SAMSUNG K-50UC FOR SYMCURES
SAMSUNG	TC3836T	K50UC	VERTICAL STRETCHED AT TOP AND BOTTOM SHORT	CHECK/REPLACE R311
SAMSUNG	TC3836TB	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	TC3845	K50UC	TV TURNS ON AS SOON AS IT IS PLUGGED IN AND NO FUNCTIONS WORK.	CHECK/REPLACE D907
SAMSUNG	TC3845	K50UC	NO SYNC BUT SYNC APPEARS GOOD AT PIN 27 OF IC501	CHECK/REPLACE R302
SAMSUNG	TC3845	K50UC	MAXIMUM VOLUME THAT IS UNCONTROLLABLE	CHECK/REPLACE R936 FOR OPEN
SAMSUNG	TC3855TB	N/A	DEAD SET OR NO VERTICAL OR IF D401/D302 FAIL	CHECK/REPLACE D401/D302 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC3856TB	N/A	DEAD SET OR NO VERTICAL OR IF D401/D302 FAIL	CHECK/REPLACE D401/D302 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC3865TB	N/A	DEAD SET OR NO VERTICAL OR IF D401/D302 FAIL	CHECK/REPLACE D401/D302 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC3866	N/A	MICROPROCESSOR LOCKUP - SET MAY SHOW RGB OR VIDEO ON SCREEN	WITH SET UNPLUGGED TEMPORARILY GROUND PIN 7 OF IC901 - CUT ANODE OF D980 FROM ANODE OF D904 AND CONNECT TO CATHODE
SAMSUNG	TC3866TB	N/A	DEAD SET OR NO VERTICAL OR IF D401/D302 FAIL	CHECK/REPLACE D401/D302 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC7000	N/A	NO AUDIO	CHECK/REPLACE ICA02
SAMSUNG	TC7000S	N/A	DEAD - POWER SUPPLY WON'T OSCILLATE	CHECK/REPLACE R813 FOR OPEN
SAMSUNG	TC7000S	N/A	NO AUDIO	CHECK/REPLACE ICA02
SAMSUNG	TC7000S	N/A	DEAD SET	CHECK/REPLACE R813
SAMSUNG	TC9155M	N/A	DEAD SET	CHECK/RESOLDER COLD JOINTS ON L402
SAMSUNG	TC9170	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC9170	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9170	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC9170	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC9170	K50S	DEAD SET--R427,R428 OPEN	REPL. R427,R428:CHECK Q403 AND D401
SAMSUNG	TC9203F	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	TC9205	N/A	SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON R545
SAMSUNG	TC9205FB	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	TC9320	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC9320	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC9320	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC9320	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9323	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC9323	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC9323	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC9323	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9640	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC9640	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9640	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC9640	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC9645	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC9645	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC9645	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC9645	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9830	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC9830	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC9830	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC9830	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9845	20K50MS	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9850	K50S	NO VERTICAL DEFLECTION	CHECK/REPLACE Q501 AND D501
SAMSUNG	TC9850	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC9850	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC9850	K50S	NO VERTICAL SWEEP	CHECK/REPLACE Q501 AND D501
SAMSUNG	TC9850	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9850	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC9850T	K50U	NO PICTURE OR AN OVERLOADED PICTURE - SOUND HAS A BUZZ	CHECK/REPLACE IC101 (LA7520)
SAMSUNG	TC9855	K50S	DEAD SET - VOLTAGE AT EMITTER OF Q901 IS LOW OR MISSING	CHECK REMOTE PREAMP BY UNPLUGGING - IF VOLTAGE IS RESTORED, REPLACE REMOTE PRE-AMP.
SAMSUNG	TC9855	K50S	DEAD SET - VOLTAGE AT PIN 34 OF IC901 IS LOW OR MISSING	CHECK R907,D907,X901 AND C901
SAMSUNG	TC9855	K50S	DARK PICTURE WITH LOW SCREEN VOLTAGE	CHECK/REPLACE C538 FOR LEAKAGE
SAMSUNG	TC9855	K50S	NO POWER-NO FUNCTIONS	CHECK R901,Q901,R907,D907,Q902,Q903,RL91,C950,C951
SAMSUNG	TC9865	K50S	DEAD SET AND LOW Vcc ON MICROPROCESSOR	CHECK/REPLACE Q903
SAMSUNG	TC9865	K50S	NO REGULATION - WHEN SET IS TURNED ON,PIX IS DISTORTED AND SET HUMS	CHECK/REPLACE R806 FOR OPEN
SAMSUNG	TC9865	K50UC	HORIZ. LINES FOR FIRST 15 MINUTES	CHECK/REPLACE IC501
SAMSUNG	TC9865	K50UC	MAXIMUM VOLUME THAT IS UNCONTROLLABLE	CHECK/REPLACE R936 FOR OPEN
SAMSUNG	TC9865	K50UC	DEAD SET	CHECK/RESOLDER CONNECTIONS ON Q801
SAMSUNG	TC9865	K50UC	INTERMITTENT NO AUDIO	CHECK/REPLACE C102
SAMSUNG	TC9865	K50UC	NO SYNC BUT SYNC APPEARS GOOD AT PIN 27 OF IC501	CHECK/REPLACE R302
SAMSUNG	TC9865	K50UC	SHORT VERTICAL SWEEP OR NO VERTICAL SWEEP	CHECK/REPLACE IC301 (P/N# 32119-102-300) AND R317 (P/N# 31018-377-399)
SAMSUNG	TC9865	K50UC	TV TURNS ON AS SOON AS IT IS PLUGGED IN AND NO FUNCTIONS WORK.	CHECK/REPLACE D907
SAMSUNG	TC9865	K50UC	DEAD SET	CHECK/REPLACE R417 AND Q402
SAMSUNG	TC9865	K50UC	NO OR INTERMITTENT VERTICAL SWEEP	CHECK/REPLACE C353 FOR OPEN OR CONNECTIONS ON C353
SAMSUNG	TC9865	K50UC	NO PICTURE OR SOUND AND SET GOES INTO SHUTDOWN	CHECK/REPLACE D401 AND R414
SAMSUNG	TC9865T	K50UC	UNIT HAS SOUND BUT NO PICTURE	CHECK/RESOLDER CONNECTIONS ON CN02 (ON CRT BOARD)
SAMSUNG	TC9865TB	K50UC	DEAD	CHECK/REPLACE Q801
SAMSUNG	TC9865TB	K50UC	NO START UP - MICRO IC SHUTDOWN AND VCC IS LOW	CHECK/REPLACE Q903
SAMSUNG	TC9865TB	K50UC	DEAD SET OR NO VERTICAL OR IF D401/D302 FAIL	CHECK/REPLACE D401/D302 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC9865TB	K50UC	SET SHUTSDOWN	CHECK/REPLACE Q405 FOR SHORT
SAMSUNG	TC9865TB	K50UC	NO CONTROL OVER THE CONTRAST	CHECK/REPLACE R210 FOR OPEN
SAMSUNG	TC9875	K50UC	MICROPROCESSOR LOCKUP - SET MAY SHOW RGB OR VIDEO ON SCREEN	WITH SET UNPLUGGED TEMPORARILY GROUND PIN 7 OF IC901 - CUT ANODE OF D980 FROM ANODE OF D904 AND CONNECT TO CATHODE
SAMSUNG	TC9875	K50UC	HORIZ. LINES FOR FIRST 15 MINUTES	CHECK/REPLACE IC501
SAMSUNG	TC9875	K50UC	NO SYNC BUT SYNC APPEARS GOOD AT PIN 27 OF IC501	CHECK/REPLACE R302
SAMSUNG	TC9875	K50UC	TV TURNS ON AS SOON AS IT IS PLUGGED IN AND NO FUNCTIONS WORK.	CHECK/REPLACE D907
SAMSUNG	TC9875	K50UC	SHORT VERTICAL SWEEP OR NO VERTICAL SWEEP	CHECK/REPLACE IC301 (P/N# 32119-102-300) AND R317 (P/N# 31018-377-399)
SAMSUNG	TC9875TB	K50UC	DEAD SET OR NO VERTICAL OR IF D401/D302 FAIL	CHECK/REPLACE D401/D302 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC9885	K50UC	NO SYNC BUT SYNC APPEARS GOOD AT PIN 27 OF IC501	CHECK/REPLACE R302
SAMSUNG	TC9885	K50UC	TV TURNS ON AS SOON AS IT IS PLUGGED IN AND NO FUNCTIONS WORK.	CHECK/REPLACE D907
SAMSUNG	TC9885	K50UC	HORIZ. LINES FOR FIRST 15 MINUTES	CHECK/REPLACE IC501
SAMSUNG	TC9885	K50UC	SHORT VERTICAL SWEEP OR NO VERTICAL SWEEP	CHECK/REPLACE IC301 (P/N# 32119-102-300) AND R317 (P/N# 31018-377-399)
SAMSUNG	TC9885	K50UC	MICROPROCESSOR LOCKUP - SET MAY SHOW RGB OR VIDEO ON SCREEN	WITH SET UNPLUGGED TEMPORARILY GROUND PIN 7 OF IC901 - CUT ANODE OF D980 FROM ANODE OF D904 AND CONNECT TO CATHODE
SAMSUNG	TC9885TB	K50UC	DEAD SET OR NO VERTICAL OR IF D401/D302 FAIL	CHECK/REPLACE D401/D302 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TC9895	K50UC	MICROPROCESSOR LOCKUP - SET MAY SHOW RGB OR VIDEO ON SCREEN	WITH SET UNPLUGGED TEMPORARILY GROUND PIN 7 OF IC901 - CUT ANODE OF D980 FROM ANODE OF D904 AND CONNECT TO CATHODE
SAMSUNG	TC9895	K50UC	HORIZ. LINES FOR FIRST 15 MINUTES	CHECK/REPLACE IC501
SAMSUNG	TC9895	K50UC	SHORT VERTICAL SWEEP OR NO VERTICAL SWEEP	CHECK/REPLACE IC301 (P/N# 32119-102-300) AND R317 (P/N# 31018-377-399)
SAMSUNG	TC9895	K50UC	NO SYNC BUT SYNC APPEARS GOOD AT PIN 27 OF IC501	CHECK/REPLACE R302
SAMSUNG	TC9895	K50UC	TV TURNS ON AS SOON AS IT IS PLUGGED IN AND NO FUNCTIONS WORK.	CHECK/REPLACE D907
SAMSUNG	TC9895TB	K50UC	DEAD SET OR NO VERTICAL OR IF D401/D302 FAIL	CHECK/REPLACE D401/D302 WITH NEW PART (P/N# 32167-201-170)
SAMSUNG	TCC1340	N/A	BRIGHT GREEN SCREEN WITH RETRACE LINES	CHECK/REPLACE Q532 AND Q535 (P/N# ECG399)
SAMSUNG	TN3846TW	N/A	DEAD - NO ATTEMPT TO TURN ON	CHECK/REPLACE C954 FOR SHORT (2200uF @ 6.3v)
SAMSUNG	TN3856	N/A	MICROPROCESSOR LOCKUP - SET MAY SHOW RGB OR VIDEO ON SCREEN	WITH SET UNPLUGGED TEMPORARILY GROUND PIN 7 OF IC901 - CUT ANODE OF D980 FROM ANODE OF D904 AND CONNECT TO CATHODE
SAMSUNG	TTB1320	N/A	DEAD	CHECK/REPLACE Q909 (MAY CHECK GOOD OUT OF CIRCUIT)
SAMSUNG	TTB1330	N/A	GREEN SCREEN WITH RETRACE LINES	CHECK/REPLACE Q535
SAMSUNG	TTB1340	N/A	INTERMITTENT AGC OVERLOAD	CHECK/REPLACE C107
SAMSUNG	TXB1920	CKA50ZH	DEAD AND 5 VOLT LINE IS BEING PULLED DOWN	CHECK/REPLACE C953 SHORTED
SAMSUNG	TXB1920	CKA50ZH	INTERMITTENTLY WON'T TURN ON FROM A COLD START-UP	CHECK/REPLACE IC901
SAMSUNG	TXB1920	CKA50ZH	DEAD SET - 5 VOLT LINE IS LOW	CHECK/REPLACE C953
SAMSUNG	TXB1920	CKA50ZH	CONTRAST WILL NOT ADJUST BUT OSD BAR DOES CHANGE	CHECK/REPLACE R209 (120k )
SAMSUNG	TXB1920	CKA50ZH	INTERMITTENT START-UP FROM A COLD START	CHECK/REPLACE IC901
SAMSUNG	TXB1920	CKA50ZH	DEAD SET - 5 VOLTS PULLED DOWN TO 1 VOLT	CHECK/REPLACE IC901 (P/N# B4002-0214)
SAMSUNG	TXB1920	CKA50ZH	NO SOUND OR CRACKLING IN THE AUDIO	CHANGE R605 TO 2.7k (P/N# 31018-177-272) AND T601 (P/N# A1205-0006)
SAMSUNG	TXB1920	CKA50ZH	NO VERTICAL SWEEP	CHECK/REPLACE R308 (1 1/2w.) AND D302 (ECG552)
SAMSUNG	TXB1930	CKA50ZH	NO VERTICAL SWEEP	CHECK/REPLACE R308 (1 1/2w.) AND D302 (ECG552)
SAMSUNG	TXB2025	K52MA	NO COLOR	CHECK/REPLACE C201
SAMSUNG	TXB2525	K52MA	NO VERTICAL SWEEP	CHECK/REPLACE D301 (P/N# 32169-301-610) AND R301 (P/N# 31059-002-010)
SAMSUNG	TXB2525	K52MD	NO SOUND BUT PICTURE IS FINE	CHECK/RESOLDER CONNECTIONS ON L812
SAMSUNG	TXB2525	K52MD	BRIGHTNESS FLUCUATES - PICTURE HAS A SMEARY LOOK - APPEARS THAT CRT IS GASSY	CHECK/REPLACE C702 FOR LEAKAGE (P/N# 31419-901-410)
SAMSUNG	TXB2725	K52MD	AUDIO HUM OUT THE SPEAKER WHEN THE TV IS IN THE STANDBY MODE	CHECK/REPLACE IC401
SAMSUNG	TXB2725	K52MD	AUDIO HUM FROM SPEAKER WHEN SET IS IN THE STANDBY MODE	CHECK/REPLACE IC401
SAMSUNG	TXB2725	K52MD	BRIGHTNESS FLUCUATES - PICTURE HAS A SMEARY LOOK - APPEARS THAT CRT IS GASSY	CHECK/REPLACE C702 FOR LEAKAGE (P/N# 31419-901-410)
SAMSUNG	TXB2725	K52MD	DEAD SET - NO ATTEMPT TO TURN ON - RAW +330v LOW	CHECK/REPLACE C811 AND C812 (680uF @ 250v)
SAMSUNG	TXB2725	K52MD	NO SOUND BUT PICTURE IS FINE	CHECK/RESOLDER CONNECTIONS ON L812
SAMSUNG	TXB2725	K52MD	NO VERTICAL SWEEP	CHECK/REPLACE D434 (P/N# 32167-201-110) AND R451 (P/N# 31059-401-000)
SAMSUNG	TXB3115	K52MD	NO VERTICAL SWEEP	CHECK/REPLACE D434 (P/N# 32167-201-110) AND R451 (P/N# 31059-401-000)
SAMSUNG	TXB3115	K52MD	BRIGHTNESS FLUCUATES - PICTURE HAS A SMEARY LOOK - APPEARS THAT CRT IS GASSY	CHECK/REPLACE C702 FOR LEAKAGE (P/N# 31419-901-410)
SAMSUNG	TXB3115	K52MD	NO SOUND BUT PICTURE IS FINE	CHECK/RESOLDER CONNECTIONS ON L812
SAMSUNG	TXC2515	N/A	DEAD SET OR HUM BAR THROUGH THE PICTURE	CHECK/REPLACE C811 680uF @ 250v (P/N#31609-979-003)
SAMSUNG	TXC2516	N/A	DEAD SET OR HUM BAR THROUGH THE PICTURE	CHECK/REPLACE C811 680uF @ 250v (P/N#31609-979-003)
SAMSUNG	TXC2715	N/A	DEAD SET OR HUM BAR THROUGH THE PICTURE	CHECK/REPLACE C811 680uF @ 250v (P/N#31609-979-003)
SAMSUNG	TXC2716	N/A	DEAD SET OR HUM BAR THROUGH THE PICTURE	CHECK/REPLACE C811 680uF @ 250v (P/N#31609-979-003)
SAMSUNG	TXE2045	KCT52A	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA8356 P/N# B4012-0437), R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXE2046	KCT52A	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA8356 P/N# B4012-0437), R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXE2545	KCT52A	POPS AND CRACKLES - WON'T TURN ON BUT HAS A BUZZING NOISE FROM FLYBACK	CHECK/REPLACE FLYBACK REF# 4-5 (P/N# AA26-30002K)
SAMSUNG	TXE2545	KCT52A	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXE2546	KCT52A	POPS AND CRACKLES - WON'T TURN ON BUT HAS A BUZZING NOISE FROM FLYBACK	CHECK/REPLACE FLYBACK REF# 4-5 (P/N# AA26-30002K)
SAMSUNG	TXE2546	KCT52A	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXE2549	KCT52A	POPS AND CRACKLES - WON'T TURN ON BUT HAS A BUZZING NOISE FROM FLYBACK	CHECK/REPLACE FLYBACK REF# 4-5 (P/N# AA26-30002K)
SAMSUNG	TXE2549	KCT52A	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXE2745	KCT52A	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXE2746	KCT52A	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXE2749	KCT52A	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXG2045	KCT52B	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA8356 P/N# B4012-0437), R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXG2046	KCT52B	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA8356 P/N# B4012-0437), R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXG2545	KCT52B	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXG2547	KCT52B	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXG2548	KCT52B	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXG2745	KCT52B	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	TXG2746	KCT52B	NO VERTICAL SWEEP	CHECK/REPLACE IC301 (TDA835OQ P/N# B4012-0607, R410(1?@ 1w P/N 2008-000264),R417(5.6?@ 1W #2008-001003)
SAMSUNG	VM3003	N/A	NO VIDEO	CHECK/REPLACE PC001
SANYO	91C80	N/A	SHORT VERT SWEEP ON BOTTOM OF SCREEN	CHECK C463 (100uF @ 25 WV N.P.)
SANYO	91C80	N/A	LOW AUDIO LEVEL	CHECK FOR OPEN C208
SANYO	91C91	N/A	ONLY CHANNEL 13 WORKS AND HAS MOTORBOATING IN THE AUDIO	CHECK/REPLACE IC1103
SANYO	AVM1301	N/A	NO GREEN IN PICTURE - ONLY RED AND BLUE	CHECK/REPLACE R714
SANYO	AVM1301	N/A	DEAD SET	CHECK/REPLACE R021 OR R022 (1.8k @ 5watt)
SANYO	AVM1903	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM1904	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM2001	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C452 AND C007
SANYO	AVM2001	N/A	REDUCED BRIGHTNESS - COLOR OK	CHECK/REPLACE C102
SANYO	AVM2001	N/A	NO COLOR OR COLOR IS OUT OF SYNC	CHECK/REPLACE C302 AND R317
SANYO	AVM2003	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM2004	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM2011	N/A	PICTURE ROLLS - NO VERTICAL SYNC	CHECK/REPLACE R404 (270k )
SANYO	AVM205	N/A	DEAD SET OR SET SHUTS DOWN	CHECK/REPLACE D493 (35v ZENER)
SANYO	AVM2051	N/A	NO GREEN IN PICTURE - ONLY RED AND BLUE	CHECK/REPLACE R714
SANYO	AVM2051	N/A	SHORT VERTICAL SWEEP - PICTURE STRETCHED	CHECK/REPLACE C452 (1uF @ 50v)
SANYO	AVM2051	N/A	NO COLOR OR INTERMITTENT COLOR	CHECK/REPLACE C321
SANYO	AVM2053	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM250	N/A	NO VERTICAL SYNC - PICTURE ROLLS	CHECK/REPLACE C407
SANYO	AVM250	N/A	WILL NOT TUNE HRC CABLE SYSTEM CHANNELS	CHANGE R127 TO 100K AND R128 TO 60K
SANYO	AVM2502	N/A	DEAD - NO CLICK OF THE RELAY	CHECK/REPLACE R021 AND R022
SANYO	AVM2502	N/A	INTERMITTENTLY SHUTS OFF	CHECK/RESOLDER CONNECTIONS ON Q402 AROUND THE RIVOTS
SANYO	AVM2502	N/A	NOT TUNING STATIONS	CHECK/REPLACE R503 (6.8K), R507 (2.2K) AND R508 (39K)
SANYO	AVM2503	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM2504	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM252	N/A	POOR CONTRAST OR NO CONTRAST CONTROL	CHECK/REPLACE C307
SANYO	AVM252	N/A	INTERMITTENT AUDIO OR NO AUDIO	CHECK/REPLACE C151
SANYO	AVM252	N/A	DEAD SET - NO RELAY CLICK	CHECK/REPLACE D023 (5.1v ZENER) AND C023 (2200uF @ 6.3v)
SANYO	AVM252A	N/A	AFT DOESN'T FUNCTION	CHECK/REPLACE R515
SANYO	AVM2552	N/A	DEAD SET - RELAY WILL NOT CLICK - NO 5 VOLTS ON PIN #42 OF IC352	CHECK/REPLACE D509 (18v ZENER)
SANYO	AVM2553	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM2554	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM258	N/A	NO VIDEO BUT COLOR IS PRESENT	CHECK/REPLACE R301
SANYO	AVM258	N/A	POOR VERTICAL LINEARITY	CHECK/REPLACE R489
SANYO	AVM2652	N/A	DEAD SET - RELAY WILL NOT CLICK - NO 5 VOLTS ON PIN #42 OF IC352	CHECK/REPLACE D509 (18v ZENER)
SANYO	AVM2653	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM265W	N/A	DEAD SET - NO POWER	CHECK/REPLACE C310
SANYO	AVM265W	N/A	POOR VERTICAL LINEARITY	CHECK/REPLACE D402
SANYO	AVM270	N/A	Q451 SHORTS AFTER 30 MINUTES	CHECK/REPLACE Q451 AND C481
SANYO	AVM270	N/A	UNIT SHUTS OFF INTERMITTENTLY	CHECK/RESOLDER CONNECTIONS ON X450
SANYO	AVM270	N/A	PICTURE FINE BUT NO SOUND - OSD STEREO INDICATOR DOES COME ON TO INDICATE STEREO BROADCAST BEING RECEIVED	CHECK/REPLACE Q1113 (P/N# 2SC1740 OR ECG85)
SANYO	AVM270	N/A	PICTURE FINE BUT NO SOUND - OSD STEREO INDICATOR DOES COME ON TO INDICATE STEREO BROADCAST BEING RECEIVED	CHECK/REPLACE Q1113 (P/N# 2SC1740 OR ECG85)
SANYO	AVM275	N/A	WASHED OUT VIDEO - NO AUDIO - NO SYNC	CHECK/REPLACE C805 AND/OR R806
SANYO	AVM2752	N/A	DEAD SET - NO RELAY CLICK	CHECK/REPLACE Q052 (P/N# ECG382)
SANYO	AVM2752	N/A	DEAD SET - RELAY WILL NOT CLICK - NO 5 VOLTS ON PIN #42 OF IC352	CHECK/REPLACE D509 (18v ZENER)
SANYO	AVM2753	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM2754	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM2764	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM276A	N/A	SET SHUTS OFF AFTER 2-3 SECONDS - IF TURNED ON REPEATEDLY, THERE IS NO VERTICAL	CHECK/REPLACE R475 (8.2? AND CONNECTIONS Q481/Q482
SANYO	AVM276A	N/A	NO VERTICAL SWEEP	CHECK/REPLACE IC451 AND D476 FOR LEAKAGE
SANYO	AVM276A	N/A	NO COLOR OR COLOR SYNC	CHECK/REPLACE R317
SANYO	AVM3153	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM3154	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	AVM3164	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS13030	N/A	PICTURE PULSATES IN & OUT	CHECK/REPLACE C006 (330uF @ 200v)
SANYO	DS19330	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS19350	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS20030	N/A	DEAD	CHECK/REPLACE IC101 (LA7655)
SANYO	DS25230	N/A	NOT TUNING STATIONS	CHECK/REPLACE R503 (6.8K), R507 (2.2K) AND R508 (39K)
SANYO	DS25230	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C452 (1uF @ 50v)
SANYO	DS25250	N/A	NOT TUNING STATIONS	CHECK/REPLACE R503 (6.8K), R507 (2.2K) AND R508 (39K)
SANYO	DS25250	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C452 (1uF @ 50v)
SANYO	DS25330	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS25350	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS25430	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS25830	N/A	SET WILL NOT SHUT OFF AND RELAY IS FINE	CHECK/REPLACE STR3130 FOR SHORT
SANYO	DS26950	N/A	INTERMITTENT VERTICAL JITTER AFTER WARM UP	CHECK/RESOLDER CONNECTIONS ON D496
SANYO	DS27350	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS27430	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS31350	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DS31450	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SANYO	DW19430	N/A	INTERMITTENT SNOW OR NO PICTURE	CHECK/RESOLDER CONNECTIONS ON ALL TUNER FRAME TO CIRCUIT BOARD CONNECTIONS
SCOTT	HTS2500	N/A	DEFECTIVE IC501	CHECK/REPLACE R444 (33k)
SCOTT	HTS2500	N/A	DEAD SET	IC501,R518,Q501,Q502
SCOTT	HTS2500	N/A	BURNS UP D506 VERY QUICKLY	CHECK C508 FOR SHORT
SCOTT	HTS2500	N/A	DEFECTIVE IC501	CHECK/REPLACE R444 (33k)
SCOTT	HTS2700	N/A	DEFECTIVE IC501	CHECK/REPLACE R444 (33k)
SCOTT	HTS2700	N/A	DEAD SET	IC501,R518,Q501,Q502
SCOTT	HTS2700	N/A	DEFECTIVE IC501	CHECK/REPLACE R444 (33k)
SCOTT	HTS2700	N/A	BURNS UP D506 VERY QUICKLY	CHECK C508 FOR SHORT
SCOTT	HTS4451D	N/A	HORZ. FREQ. DRIFTS INTERMITTENTLY AFTER 10-15 MINUTES	CHECK/REPLACE C401,C403 AND C404 FOR LEAKAGE/OPEN
SCOTT	HTS4451D	N/A	NO AUDIO-VOLUME CTRL. DOES WORK BUT ONLY HAS A HISS IN SPEAKERS	CHECK/REPLACE C307 FOR LEAKAGE
SEARS	56242410550	N/A	INSUFFICIENT VERTICAL SWEEP	CHECK/REPLACE C308 (2.2uF @ 50v)
SEARS	56242410550	N/A	PICTURE PULSATES FROM GOOD-BAD-GOOD - AFT PROBLEMS	CHECK ALIGNMENT OF L171
SEARS	56242420450	N/A	PICTURE PULSATES OR POOR AFT LOCK	RE-ADJUST L171 SLIGHTLY COUNTER-CLOCKWISE
SEARS	56242580450	N/A	PICTURE PULSATES OR POOR AFT LOCK	RE-ADJUST L171 SLIGHTLY COUNTER-CLOCKWISE
SEARS	56440843651	N/A	WHEN USING A VCR THAT HAS OSD,THE COLOR KILLER ON TV IS ACTIVATED ON CERTAIN CHANNELS	ADD A 1meg ohm ACROSS R316
SEARS	56441692800	N/A	NON LINEAR VERT FOLDOVER	CHECK NON POLARIZED CAP C463
SEARS	56441692800	N/A	LOSES HORZ. SYNC AFTER IT GETS WARM	T401 AGING PROBLEM--TEST WITH COOLANT SPRAY
SEARS	56441701502	N/A	PIX IS OK,BUT IT HAS RETRACE LINES	C427
SEARS	56441701503	N/A	PIX IS OK,BUT IT HAS RETRACE LINES	C427
SEARS	56441730500	N/A	VERT FOLDOVER AND SOFT VERT LOCK	C455
SEARS	56441730500	N/A	RUNS FINE UNTIL WARM,THEN STOPS	CHECK Q401 WITH COOLANT SPRAY
SEARS	56441730501	N/A	RUNS FINE UNTIL WARM,THEN STOPS	CHECK Q401 WITH COOLANT SPRAY
SEARS	56441730501	N/A	VERT FOLDOVER AND SOFT VERT LOCK	C455
SEARS	56441730502	N/A	RUNS FINE UNTIL WARM,THEN STOPS	CHECK Q401 WITH COOLANT SPRAY
SEARS	56441730502	N/A	VERT FOLDOVER AND SOFT VERT LOCK	C455
SEARS	56442072050	N/A	PIX IS HALF THE WIDTH	CHECK C440 FOR LOST CAPACITY
SEARS	56442101151	N/A	NO VOLTAGE REGULATION/GOES INTO SHUTDOWN	REPLACE LA5112N AND D005 (SK9188)
SEARS	56442101151	N/A	LOW DC VOLTAGE	CHECK AND REPLACE C003 IF CHANGED VALUE
SEARS	56442160700	N/A	NO VERT SWEEP	CHECK C463 AND R480
SEARS	56442160700	N/A	SHORT VERT SWEEP ON BOTTOM OF SCREEN	CHECK C463 (100uF @ 25 WV N.P.)
SEARS	56442160700	N/A	LOW AUDIO LEVEL	CHECK FOR OPEN C208
SEARS	56442230050	N/A	PIX IS HALF THE WIDTH	CHECK C440 FOR LOST CAPACITY
SEARS	56442250251	N/A	NO SOUND OR PICTURE - ONLY HAS HUM IN AUDIO	CHECK/REPLACE C003
SEARS	56442351650	N/A	LOSS OF COLOR ON CHANNEL 3	CHANGE C406 TO A 1500pF
SEARS	56442351650	N/A	POWER SUPPLY SQUEALS WITH A HIGH PITCHED SOUND	ADD A .1uF FROM ANODE OF D609 TO GROUND
SEARS	56442370150	N/A	LINES AT TOP OF PIX	CHECK/REPLACE C471 FOR OPEN
SEARS	56442451650	N/A	LOSS OF COLOR ON CHANNEL 3	CHANGE C406 TO A 1500pF
SEARS	56442451650	N/A	POWER SUPPLY SQUEALS WITH A HIGH PITCHED SOUND	ADD A .1uF FROM ANODE OF D609 TO GROUND
SEARS	56442452751	N/A	SHUTS DOWN IN 1-2 HOURS	CHECK/REPLACE A651 AND IC601
SEARS	56442701650	N/A	LOW LEVEL BUZZ	MOVE GROUND CONNECTION OF C733 TO THE SAME LOCATION AS C736--DO THE SAME WITH C738 TO GROUND OF C737
SEARS	56442720450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56442720451	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56442821750	N/A	PICTURE PULSATES OR TV SHUTS OFF INTERMITTENTLY	CHECK/REPLACE IC001 (STR3130) REGULATOR IC
SEARS	56442903850	N/A	RASTER FADES AND BECOMES VERY DARK AFTER BEING ON FOR AWHILE	CHECK/REPLACE R714 (SHOULD BE A 2.2 ohm AND NOT A .22 ohm) WRONG RESISTOR CAN ALSO CAUSE CRT DAMAGE
SEARS	56443030450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56443240450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56443340450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56443440450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56443540450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56448122650	N/A	LOSS OF COLOR ON CHANNEL 4	CHANGE R312 TO 8.2k AND C342 TO 330pF
SEARS	56448200550	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56448890650	N/A	FAINT WHITE DOTS AT THE BOTTOM OF THE SCREEN	ADD 27k ACROSS R3BA
SEARS	56448890650	N/A	COLOR FADES ON SOME CHANNELS	CHANGE C306 TO 220pF
SEARS	56449010250	N/A	SHUTDOWN/NO VOLTAGE REGULATION	SHORTED D003,LEAKY D004
SEARS	56449010250	N/A	FOLDOVER AN LOSS OF VERT. AT TOP OF SCREEN	C455 (4.7uF)
SEARS	56449010250	N/A	WILL NOT CHANGE CHANNELS BUT WILL TUNE	REPLACE M51233P
SEARS	56449020250	N/A	SHUTDOWN/NO VOLTAGE REGULATION	SHORTED D003,LEAKY D004
SEARS	56449020251	N/A	SHUTDOWN/NO VOLTAGE REGULATION	SHORTED D003,LEAKY D004
SEARS	56449050450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449060350	N/A	SHUTDOWN/NO VOLTAGE REGULATION	SHORTED D003,LEAKY D004
SEARS	56449060351	N/A	SHUTDOWN/NO VOLTAGE REGULATION	SHORTED D003,LEAKY D004
SEARS	56449061450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449070450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449100450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449110450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449110451	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449110452	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449630350	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449630351	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449630352	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449630353	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449630354	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449650450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449730350	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449730351	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449730352	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449730353	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449730354	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	56449750450	N/A	FLAGGING WHEN USED WITH A VCR OR SOME CABLE SYSTEMS	ADD A 270k ACROSS PINS 3 & 5 OF IC401 - ADD 68k ACROSS R418
SEARS	58040355750	N/A	NO COLOR	CHECK/REPLACE C503 FOR LEAKY
SEARS	58040356850	N/A	NO COLOR	CHECK/REPLACE C503 FOR LEAKY
SEARS	58040391850	N/A	AUDIO SQUEAL AT LOW VOLUME	CHANGE C604 TO 47uF @ 16v
SEARS	58040472850	N/A	RELAY WILL NOT STAY ON	CHECK/REPLACE D810
SEARS	58040472850	N/A	POOR AUDIO	CHECK/REPLACE Q903
SEARS	58040472850	NC95A	TURN SET ON AND RELAY KICKS OFF AFTER 2-3 SECONDS WON'T STAY ON	CHECK/REPLACE D810 FOR OPEN OR SHORT (P/N# 06220071)
SEARS	58042003750	NC05	NO COLOR (GOLDSTAR CHASSIS)	CHECK/REPLACE IC501
SEARS	58042003750	NC05X3	INTERMITTENT OR NO COLOR	CHECK/REPLACE C509 FOR LEAKAGE OR INTERMITTENT
SEARS	58042032850	N/A	AUDIO SQUEAL AT LOW VOLUME	CHANGE C604 TO 47uF @ 16v
SEARS	58042305850	NC06X	DEAD SET	CHECK/REPLACE D801
SEARS	58042305850	NC06X	POOR REGULATION	CHECK/REPLACE D802
SHARP	137LM	N/A	INTERMITTENT SHUTDOWN WHEN A SCENE CHANGES FROM DARK TO BRIGHT.	CHANGE C612 TO A 100uF/50WV
SHARP	137LM	N/A	HORZ PULLING OR BENDING OF THE PIX.	ADD 1.5k BETWEEN PIN 60 (IC801) AND + SIDE OF C608, .0022uF PIN 60 TO GRD,CHNG.C607 TO 0.027uF
SHARP	13AM100	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13AM100	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13AM150	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13AM150	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13CM100	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13EM100	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	13EM100	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13EM150	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	13EM150	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13EM40	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	13EM40	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13EM50	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	13EM50	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13FM100	N/A	NO VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 25v)
SHARP	13FM100	N/A	DEAD SET - NO RELAY CLICK - 5v SUPPLY DOWN TO 1 VOLT OR LESS	CHECK/REPLACE REMOTE RECEIVER (P/N# RRMCU0207CEZZ)
SHARP	13FM150	N/A	DEAD SET - NO RELAY CLICK - 5v SUPPLY DOWN TO 1 VOLT OR LESS	CHECK/REPLACE REMOTE RECEIVER (P/N# RRMCU0207CEZZ)
SHARP	13FM40	N/A	DEAD SET - NO RELAY CLICK - 5v SUPPLY DOWN TO 1 VOLT OR LESS	CHECK/REPLACE REMOTE RECEIVER (P/N# RRMCU0207CEZZ)
SHARP	13FM50	N/A	DEAD SET - NO RELAY CLICK - 5v SUPPLY DOWN TO 1 VOLT OR LESS	CHECK/REPLACE REMOTE RECEIVER (P/N# RRMCU0207CEZZ)
SHARP	13GM100	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	13GM100	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	13GM100	N/A	AUDIO BUZZ WHEN RECEIVING A WEAK SIGNAL	INSTALL C517 1000pF @ 50v (VCKYPA1HB102K) BETWEEN ANODE OF D501 AND PIN #1 OF IC501
SHARP	13GM100	N/A	RED 'T' IN THE UPPER RIGHT CORNER OF SCREEN CAUSE BY PRESSING '4' OF ANOTHER MANUFACTURES REMOTE	BEFORE REPL.IC2001, PRESS '4' KEY ON ORIG. REMOTE TO RESET CHECK/REPLACE IC2001 (P/N# RH-IX2552CEN2 OR RH-IX2599CEN2)
SHARP	13GM120	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	13GM120	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	13GM150	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	13GM150	N/A	AUDIO BUZZ WHEN RECEIVING A WEAK SIGNAL	INSTALL C517 1000pF @ 50v (VCKYPA1HB102K) BETWEEN ANODE OF D501 AND PIN #1 OF IC501
SHARP	13GM150	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	13GM150	N/A	RED 'T' IN THE UPPER RIGHT CORNER OF SCREEN CAUSE BY PRESSING '4' OF ANOTHER MANUFACTURES REMOTE	BEFORE REPL.IC2001, PRESS '4' KEY ON ORIG. REMOTE TO RESET CHECK/REPLACE IC2001 (P/N# RH-IX2552CEN2 OR RH-IX2599CEN2)
SHARP	13GM200	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	13GM200	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	13GM60	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	13GM60	N/A	AUDIO BUZZ WHEN RECEIVING A WEAK SIGNAL	INSTALL C517 1000pF @ 50v (VCKYPA1HB102K) BETWEEN ANODE OF D501 AND PIN #1 OF IC501
SHARP	13GM60	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	13GM80	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	13GM80	N/A	AUDIO BUZZ WHEN RECEIVING A WEAK SIGNAL	INSTALL C517 1000pF @ 50v (VCKYPA1HB102K) BETWEEN ANODE OF D501 AND PIN #1 OF IC501
SHARP	13GM80	N/A	RED 'T' IN THE UPPER RIGHT CORNER OF SCREEN CAUSE BY PRESSING '4' OF ANOTHER MANUFACTURES REMOTE	BEFORE REPL.IC2001, PRESS '4' KEY ON ORIG. REMOTE TO RESET CHECK/REPLACE IC2001 (P/N# RH-IX2552CEN2 OR RH-IX2599CEN2)
SHARP	13GM80	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	13HM60	N/A	DEAD SET - CLICKS BUT NO POWER	CHECK/REPLACE CF631 (503kHz CRYSTAL)
SHARP	13JM100	N/A	INTERMITTENT TUNER OPERATION - GOES TO SNOW	CHECK/REPLACE C52 (22uF @ 16v TANTALUM)
SHARP	13JM150	N/A	INTERMITTENT TUNER OPERATION - GOES TO SNOW	CHECK/REPLACE C52 (22uF @ 16v TANTALUM)
SHARP	13LM56	N/A	HORZ PULLING OR BENDING OF THE PIX.	ADD 1.5k BETWEEN PIN 60 (IC801) AND + SIDE OF C608, .0022uF PIN 60 TO GRD,CHNG.C607 TO 0.027uF
SHARP	13LM56	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	13LV56	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	13LV56	N/A	HORZ PULLING OR BENDING OF THE PIX.	ADD 1.5k BETWEEN PIN 60 (IC801) AND + SIDE OF C608, .0022uF PIN 60 TO GRD,CHNG.R607 TO 4.7k OHMS
SHARP	13MM17	N/A	AFT HUNTS SEVERAL TIMES BEFORE LOCKING IN	RE-ALIGN AFT COIL L206
SHARP	13NF78	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13NF78	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13NM48	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13NM48	N/A	WILL NOT TUNE ANY CHANNEL	CHECK/REPLACE IC1401 (P/N# VHIUPC1486C-1)
SHARP	13NM48	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13NV10	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13NV10	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13NV10	N/A	WILL NOT TUNE ANY CHANNEL	CHECK/REPLACE IC1401 (P/N# VHIUPC1486C-1)
SHARP	13NV58	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	13NV58	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13NV58	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13NV68	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13NV68	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13RM519	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13RM519	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13RM59	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13RM59	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13RP59	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13RV21	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	13RV21	N/A	DISTORTED AUDIO AND USUALLY THERMAL	CHECK/REPLACE IC201 (TA8680)
SHARP	13RV21	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13RV21	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13RV629	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13RV629	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	13RV629	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13RV649	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13RV649	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	13RV649	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13RV659	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13RV659	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13RV69	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13RV69	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13RV69	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	13SB50	N/A	AUDIO HAS A FLUTTER OR WARBLE IN IT	CHECK/REPLACE C1702 (220uF @ 16v) AND C1705 (10uF @ 160v)
SHARP	13SB50	N/A	AFT HUNTS SEVERAL TIMES BEFORE LOCKING IN	RE-ALIGN AFT COIL L206
SHARP	13SB50	N/A	DISTORTED AUDIO	CHECK/REPLACE C1702 SHORTED (220uF @ 16v)
SHARP	13SB50	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	13SB50	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13SB60	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13SB610	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13SB620	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13SB640	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	13SB70	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	14KV455	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C505,C504, AND IC501
SHARP	192LP	N/A	HORZ PULLING OR BENDING OF THE PIX. CHANGE R607 TO 6.8k (SEE NOTES BELOW)	ADD 1.5k TO PIN 60 (IC801) AND + OF C608,.0022uF PIN 60 TO GRD,CHNG.R618>2.2k,DEL C628,C607>.027uF.
SHARP	192MP	N/A	HORZ PULLING OR BENDING OF THE PIX. CHANGE R607 TO 6.8k (SEE NOTES BELOW)	ADD 1.5k TO PIN 60 (IC801) AND + OF C608,.0022uF PIN 60 TO GRD,CHNG.R618>2.2k,DEL C628,C607>.027uF.
SHARP	192MP	N/A	NO VERTICAL SWEEP	CHECK/RESOLDER CONNECTIONS ON C505
SHARP	195LP	N/A	HORZ PULLING OR BENDING OF THE PIX. ADD 1.5k (PIN 60) TO JUNCTION OF R607 AND C607	CHNG R618 TO 2.2k,CHNG C607 TO .027uF,ADD .0022uF FROM PIN 60(IC801)TO GRD.,CHNG. R607 TO 6.8k.
SHARP	19AM050	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	19AM100	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	19AM100	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	19AM100	N/A	NO START-UP BUT RELAY DOES CLICK	CHECK/REPLACE R752 FOR CHANGE IN VALUE (10k )
SHARP	19AM150	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	19AM150	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	19AM150	N/A	NO START-UP BUT RELAY DOES CLICK	CHECK/REPLACE R752 FOR CHANGE IN VALUE (10k )
SHARP	19C85	N/A	NO SOUND AND NO PIX - MAY POSSIBLY TICK	CHECK Q602 FOR LEAKY/SHORT AND R613 FOR OPEN
SHARP	19C85	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19C85	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R416 (12k) FOR OPEN
SHARP	19C85	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19CM100	N/A	DEAD - NO RELAY CLICK	CHECK/REPLACE Q1701 (ECG382) OR 2SC945
SHARP	19CM100	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	19CM200	N/A	DEAD - NO RELAY CLICK	CHECK/REPLACE Q1701 (ECG382) OR 2SC945
SHARP	19CM300	N/A	DEAD - NO RELAY CLICK	CHECK/REPLACE Q1701 (ECG382) OR 2SC945
SHARP	19EM100	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	19EM100	N/A	HAS OSD BUT NO SOUND	CHECK/REPLACE D763 (1N4148 OR RH-DX0045GEZZ)
SHARP	19EM120	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	19EM120	N/A	HAS OSD BUT NO SOUND	CHECK/REPLACE D763 (1N4148 OR RH-DX0045GEZZ)
SHARP	19EM150	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	19EM150	N/A	HAS OSD BUT NO SOUND	CHECK/REPLACE D763 (1N4148 OR RH-DX0045GEZZ)
SHARP	19EM40	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	19EM40	N/A	HAS OSD BUT NO SOUND	CHECK/REPLACE D763 (1N4148 OR RH-DX0045GEZZ)
SHARP	19EM40	N/A	NO PICTURE - PICTURE APPEARS WHEN MENUS ARE PRESENT ON THE SCREEN BUT DISAPPEARS WHEN MENU LEAVES	CHECK FOR CLOSED CAPTION TEXT MODE
SHARP	19EM50	N/A	ON SCREEN CUSTOMER ADJUSTMENTS HAVE 3 LEVELS-O%,50%,100% THERE IS NO IN BETWEEN VALUES	CHECK/REPLACE IC2701 (P/N# RH-IX2281CEZZ)
SHARP	19EM50	N/A	HAS OSD BUT NO SOUND	CHECK/REPLACE D763 (1N4148 OR RH-DX0045GEZZ)
SHARP	19FM100	N/A	DEAD SET - NO RELAY CLICK - 5v SUPPLY DOWN TO 1 VOLT OR LESS	CHECK/REPLACE REMOTE RECEIVER (P/N# RRMCU0207CEZZ)
SHARP	19FM100	N/A	SET SHUTS DOWN WHEN TURNED ON	CHECK/REPLACE C710 FOR OPEN
SHARP	19FM120	N/A	SET SHUTS DOWN WHEN TURNED ON	CHECK/REPLACE C710 FOR OPEN
SHARP	19FM150	N/A	DEAD SET - NO RELAY CLICK - 5v SUPPLY DOWN TO 1 VOLT OR LESS	CHECK/REPLACE REMOTE RECEIVER (P/N# RRMCU0207CEZZ)
SHARP	19FM150	N/A	SET SHUTS DOWN WHEN TURNED ON	CHECK/REPLACE C710 FOR OPEN
SHARP	19FM40	N/A	DEAD SET - NO RELAY CLICK - 5v SUPPLY DOWN TO 1 VOLT OR LESS	CHECK/REPLACE REMOTE RECEIVER (P/N# RRMCU0207CEZZ)
SHARP	19FM40	N/A	SET SHUTS DOWN WHEN TURNED ON	CHECK/REPLACE C710 FOR OPEN
SHARP	19FM50	N/A	DEAD SET - NO RELAY CLICK - 5v SUPPLY DOWN TO 1 VOLT OR LESS	CHECK/REPLACE REMOTE RECEIVER (P/N# RRMCU0207CEZZ)
SHARP	19FM50	N/A	SET SHUTS DOWN WHEN TURNED ON	CHECK/REPLACE C710 FOR OPEN
SHARP	19GM100	N/A	RED 'T' IN THE UPPER RIGHT CORNER OF SCREEN CAUSE BY PRESSING '4' OF ANOTHER MANUFACTURES REMOTE	BEFORE REPL.IC2001, PRESS '4' KEY ON ORIG. REMOTE TO RESET CHECK/REPLACE IC2001 (P/N# RH-IX2552CEN2 OR RH-IX2599CEN2)
SHARP	19GM100	N/A	DARK VERTICAL LINE ON THE RIGHT SIDE OF SCREEN WHEN USING THE FRONT A-V JACKS FOR AN INPUT	REMOVE JUMPER J16 (NEAR B+ ADJUST), CUT THE GROUND WIRE PIN# 3 OF J14 (NEAR IC201) AND TAPE END
SHARP	19GM100	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	19GM100	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	19GM120	N/A	DARK VERTICAL LINE ON THE RIGHT SIDE OF SCREEN WHEN USING THE FRONT A-V JACKS FOR AN INPUT	REMOVE JUMPER J16 (NEAR B+ ADJUST), CUT THE GROUND WIRE PIN# 3 OF J14 (NEAR IC201) AND TAPE END
SHARP	19GM120	N/A	RED 'T' IN THE UPPER RIGHT CORNER OF SCREEN CAUSE BY PRESSING '4' OF ANOTHER MANUFACTURES REMOTE	BEFORE REPL.IC2001, PRESS '4' KEY ON ORIG. REMOTE TO RESET CHECK/REPLACE IC2001 (P/N# RH-IX2552CEN2 OR RH-IX2599CEN2)
SHARP	19GM120	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	19GM120	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	19GM150	N/A	RED 'T' IN THE UPPER RIGHT CORNER OF SCREEN CAUSE BY PRESSING '4' OF ANOTHER MANUFACTURES REMOTE	BEFORE REPL.IC2001, PRESS '4' KEY ON ORIG. REMOTE TO RESET CHECK/REPLACE IC2001 (P/N# RH-IX2552CEN2 OR RH-IX2599CEN2)
SHARP	19GM150	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	19GM150	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	19GM150	N/A	DARK VERTICAL LINE ON THE RIGHT SIDE OF SCREEN WHEN USING THE FRONT A-V JACKS FOR AN INPUT	REMOVE JUMPER J16 (NEAR B+ ADJUST), CUT THE GROUND WIRE PIN# 3 OF J14 (NEAR IC201) AND TAPE END
SHARP	19GM200	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	19GM200	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	19GM60	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	19GM60	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	19GM80	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C513 (470uF @ 50v)
SHARP	19GM80	N/A	DEAD - JUST CLICKS	CHECK/REPLACE Q602 (VS2SD1554//1E) AND R717 (VRW-KQ4AC6R8K)
SHARP	19GM80	N/A	RED 'T' IN THE UPPER RIGHT CORNER OF SCREEN CAUSE BY PRESSING '4' OF ANOTHER MANUFACTURES REMOTE	BEFORE REPL.IC2001, PRESS '4' KEY ON ORIG. REMOTE TO RESET CHECK/REPLACE IC2001 (P/N# RH-IX2552CEN2 OR RH-IX2599CEN2)
SHARP	19H74	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19H74	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19H78	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19H78	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19H84	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19H84	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19H94	N/A	SET WILL NOT START UP	R611
SHARP	19H94	N/A	NO B/W PIX.	CHECK/REPLACE R422,R423
SHARP	19H94	N/A	SLOW TICKING	IC801,R619
SHARP	19H94	N/A	GASSY PIX-LOOKS LIKE CRT IS BAD	CHECK C856 FOR LEAKAGE--CHECKS OK FOR VALUE
SHARP	19H94	N/A	NO SOUND AND NO PIX - MAY POSSIBLY TICK	CHECK Q602 FOR LEAKY/SHORT AND R613 FOR OPEN
SHARP	19H94	N/A	NO PICTURE - HAS HV AND SOUND IS NORMAL	CHECK/REPLACE R422 (100k)
SHARP	19H94	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19H94	N/A	NO RASTER	CHECK/REPLACE C855,C856
SHARP	19H94	N/A	NO SOUND NO PIX.	CHECK/REPLACE R621,D601,R423 & H.O.T.
SHARP	19H94	N/A	SMEARY PIX AFTER FLYBACK REPL.--LOOKS LIKE CRT	CHECK R423 (10k) FOR OPEN
SHARP	19H94	N/A	RAPIDLY PULSATES ON/OFF WHEN SET IS 1ST PLUG IN	CHECK THE SCR FOR LEAKY GATE
SHARP	19H94	N/A	FAST TICKING	R715,D705
SHARP	19H94	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19H94	N/A	FUSE BLOWING	Q602,D701-D704
SHARP	19H94	N/A	SHORT VERT SWEEP	C506
SHARP	19H94	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19H94	N/A	BLACK BAR 1'TO 2' FROM BOTTOM OF PIX	CHECK/REPLACE C510
SHARP	19H94	N/A	SOUND AND CHROMA OK - NO VIDEO INFORMATION	CHECK/REPLACE R422 (100k) FOR OPEN
SHARP	19H94	N/A	NO COLOR	IC801
SHARP	19H94	N/A	DEAD,SLOW TICKING,NO COLL. B+ TO HORZ. OUT	CHECK FOR OPEN FLYBACK WINDING
SHARP	19H94	N/A	VERT JITTER OR ROLL WHEN COLD	C504,C510
SHARP	19H94	N/A	NO VIDEO	R423 OPEN USUALLY AFTER FLYBACK GOES OUT
SHARP	19H94	N/A	NO COLOR;VERT SHADING BARS ON LEFT SIDE OF PIX	CHECK R425
SHARP	19H94	N/A	SHORT ON 18 VOLT SCAN SUPPLY	CHECK IC701 FOR SHORT
SHARP	19H94	N/A	VERTICAL OUTPUT PROMBLEMS	CHECK D503,R522,C504.C510
SHARP	19H94	N/A	GASSY PIX--LOOKS LIKE CRT IS BAD	CHECK FOR LEAKY C856
SHARP	19H94	N/A	NO SOUND NO PICTURE	IC801,R705
SHARP	19J63	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19J63	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19J65	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19J65	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19J69	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19J69	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19J79	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19J79	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19J81	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19J81	N/A	JAIL BARS ON SCREEN ALSO LACK OF COLOR	CHECK R425 (12k) FOR OPEN
SHARP	19JM100	N/A	INTERMITTENT TUNER OPERATION - GOES TO SNOW	CHECK/REPLACE C52 (22uF @ 16v TANTALUM)
SHARP	19JM150	N/A	INTERMITTENT TUNER OPERATION - GOES TO SNOW	CHECK/REPLACE C52 (22uF @ 16v TANTALUM)
SHARP	19LP16	N/A	HORZ PULLING OR BENDING OF THE PIX. CHANGE R607 TO 6.8k (SEE NOTES BELOW)	ADD 1.5k TO PIN 60 (IC801) AND + OF C608,.0022uF PIN 60 TO GRD,CHNG.R618>2.2k,DEL C628,C607>.027uF.
SHARP	19LP16	N/A	BUZZING SOUND ON CERTAIN CABLE CHANNELS	ADD 22uH COIL (VP-LK220K0000)IN SERIES WITH 180pF CAP (VCKYPA2HB181K)BETWEEN CF301 AND C301 TO GROUND.
SHARP	19LP16	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19LP16	N/A	DEAD SET - HAS ABOUT 70 VOLTS ON COLLECTOR OF THE HORZ. OUTPUT TRANSISTOR	CHECK/RESOLDER COLD JOINTS ON T601
SHARP	19LP16	N/A	NO VERT. SWEEP	CHECK C505 OR CONNECTIONS
SHARP	19LP36	N/A	DEAD SET - HAS ABOUT 70 VOLTS ON COLLECTOR OF THE HORZ. OUTPUT TRANSISTOR	CHECK/RESOLDER COLD JOINTS ON T601
SHARP	19LP36	N/A	HORZ PULLING OR BENDING OF THE PIX. ADD 1.5k (PIN 60) TO JUNCTION OF R607 AND C607	CHNG R618 TO 2.2k,CHNG C607 TO .027uF,ADD .0022uF FROM PIN 60(IC801)TO GRD.,CHNG. R607 TO 6.8k.
SHARP	19LP36	N/A	BUZZING SOUND ON CERTAIN CABLE CHANNELS	ADD 22uH COIL (VP-LK220K0000)IN SERIES WITH 180pF CAP (VCKYPA2HB181K)BETWEEN CF301 AND C301 TO GROUND.
SHARP	19LP36	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19LP36	N/A	NO VERT. SWEEP	CHECK C505 OR CONNECTIONS
SHARP	19LP56	N/A	BUZZING SOUND ON CERTAIN CABLE CHANNELS	ADD 22uH COIL (VP-LK220K0000)IN SERIES WITH 180pF CAP (VCKYPA2HB181K)BETWEEN CF301 AND C301 TO GROUND.
SHARP	19LP56	N/A	HORZ PULLING OR BENDING OF THE PIX. ADD 1.5k (PIN 60) TO JUNCTION OF R607 AND C607	CHNG R618 TO 2.2k,CHNG C607 TO .027uF,ADD .0022uF FROM PIN 60(IC801)TO GRD.,CHNG. R607 TO 6.8k.
SHARP	19LP56	N/A	DEAD SET - HAS ABOUT 70 VOLTS ON COLLECTOR OF THE HORZ. OUTPUT TRANSISTOR	CHECK/RESOLDER COLD JOINTS ON T601
SHARP	19LP56	N/A	BRIGHT SCREEN WITH RETRACE LINES UNCONTROLLABLE	CHECK/REPLACE R620 AND C623
SHARP	19LP56	N/A	NO VERT. SWEEP	CHECK C505 OR CONNECTIONS
SHARP	19LP56	N/A	SHORT VERTICAL SWEEP	CHECK/REPLACE C503,C506 AND C507
SHARP	19LP56	N/A	NO COLOR BUT MAY HAVE VERY WEAK COLOR BARS	CHECK/REPLACE C809 (TRIMMER CAPACITOR FOR 3.58MHz ADJUST)
SHARP	19MP17	N/A	HORZ PULLING OR BENDING OF THE PIX. CHANGE R607 TO 6.8k (SEE NOTES BELOW)	ADD 1.5k TO PIN 60 (IC801) AND + OF C608,.0022uF PIN 60 TO GRD,CHNG.R618>2.2k,DEL C628,C607>.027uF.
SHARP	19MP17	N/A	NO VERTICAL SWEEP	CHECK/RESOLDER CONNECTIONS ON C505
SHARP	19MP37	N/A	HORZ PULLING OR BENDING OF THE PIX. CHANGE R607 TO 6.8k (SEE NOTES BELOW)	ADD 1.5k TO PIN 60 (IC801) AND + OF C608,.0022uF PIN 60 TO GRD,C607>.027uF.,CHNG. R618 TO 2.2K
SHARP	19MP37	N/A	NO VERTICAL SWEEP	CHECK/RESOLDER CONNECTIONS ON C505
SHARP	19MP57	N/A	INTERMITTENT TIC TIC - MAY START UP SOMETIMES	CHECK/RESOLDER CONNECTIONS ON T601
SHARP	19MP57	N/A	NO VERTICAL SWEEP	CHECK/RESOLDER CONNECTIONS ON C505
SHARP	19MP57	N/A	HORZ PULLING OR BENDING OF THE PIX. ADD 1.5k (PIN 60) TO JUNCTION OF R607 AND C607	CHNG C607 TO .027uF,ADD .0022uF,CHNG R618 TO 2.2k FROM PIN 60(IC801)TO GRD.,CHNG. R607 TO 6.8k.
SHARP	19MP57B	N/A	HORZ PULLING OR BENDING OF THE PIX. CHANGE R607 TO 6.8k (SEE NOTES BELOW)	ADD 1.5k TO PIN 60 (IC801) AND + OF C608,.0022uF PIN 60 TO GRD,C607>.027uF.,CHNG. R618 TO 2.2K
SHARP	19MP57B	N/A	HORZ PULLING OR BENDING OF THE PIX. ADD 1.5k (PIN 60) TO JUNCTION OF R607 AND C607	CHNG R618 TO 2.2k,CHNG C607 TO .027uF,ADD .0022uF FROM PIN 60(IC801)TO GRD.,CHNG. R607 TO 6.8k.
SHARP	19NP18	N/A	ONLY SNOW ON SCREEN-WILL NOT TUNE A CHANNEL	CHECK IC1401 (UPC1486C)
SHARP	19NP18	N/A	REGULATOR WON'T START UP	CHECK D705,R702,IC701
SHARP	19NP18	N/A	DEAD SET	CHECK D701-D704,R701
SHARP	19NP38	N/A	DEAD SET	CHECK D701-D704,R701
SHARP	19NP38	N/A	REGULATOR WON'T START UP	CHECK D705,R702,IC701
SHARP	19NP38	N/A	CO-CHANNEL INTERFERENCE	CHECK/REPLACE ANTENNA BLOCK (RUNTK0371CEZZ)
SHARP	19NP38	N/A	CO-CHANNEL INTERFERENCE	REPLACE ANTENNA BLOCK (P/N # RUNTK0371CEZZ)
SHARP	19NP38	N/A	ONLY SNOW ON SCREEN-WILL NOT TUNE A CHANNEL	CHECK IC1401 (UPC1486C)

LAMSON Digital Electronics Address: 1324-1326 Jose Abad Santos Ave.,Manila, Philippines TEL:00632-2559675  TEL/FAX:00632-2568130 Cellular:0922-8867809 0922-8867810 E-mail:lamsonsm@gmail.com    YAHOO MESSENGER ID : myrna_q_ng or saishu_ng SKYPE ID: myrna_q_ng or saishu_ng (old) Lamson Importers & Exporters Trading <We will not be using the old address and phone no. in the future. Please be noted when calling us, sending letters, parcels or buying our products> OLD Address: 681 Carmen Building, Ronquillo St. Quiapo, Manila, Philippines Phone:00632-7332936 7332940 Fax:00632-7332940 E-mail: