MAKE | MODEL | CHASSIS | SYMPTOM | CURE | |
MITSUBISHI | CK3514 | N/A | NO AUDIO OUTPUT | CHECK R914,C930 AND BENT PINS ON 'SD' PLUG | |
MITSUBISHI | CK3514 | N/A | NO PIX/NO SOUND -- HV PRESENT | CHECK L555 | |
MITSUBISHI | CK3514 | N/A | WHITE STRIPE ACROSS TOP AND BLACK STRIPE ACROSS BOTTOM OF PIX- VIDEO PRESENT IN CENTER. | CHECK D407 FOR LEAKAGE | |
MITSUBISHI | CK3514 | N/A | MAGENTA INSERT PIX IN ALL PIP MODES | CHECK L7000 OPEN | |
MITSUBISHI | CK3514R | N/A | NO OR INTERMITTENT COLOR | CHECK/REPLACE VR7100 | |
MITSUBISHI | CK3514R | N/A | NO COLOR ON MAIN PIX OR PIP PIX | CHECK/REPLACE X601 (P/N# 285P015010) | |
MITSUBISHI | CK3514R | N/A | NO COLOR ON MAIN PIX OR PIP PIX | CHECK/REPLACE C7119 (0.01uF @ 25v) ON DIGITAL PCB | |
MITSUBISHI | CK3514R | N/A | NO TUNER AUDIO | CHECK/REPLACE C305 (0.01uF @ 50v) FOR LEAKY OR SHORT | |
MITSUBISHI | CK3515R | N/A | NO LUMINANCE SIGNAL | CHECK/REPLACE Q655 (P/N# 260P57010) | |
MITSUBISHI | CK3521 | N/A | TOP OF PICTURE IS STRETCHED VERTICALLY | CHECK/REPLACE C4E3 WITH A 1uF @ 35v TANTALUM | |
MITSUBISHI | CK3526 | N/A | BLACK BARS IN PICTURE (ONLY PRESENT WITH COLOR SIGNALS) | CHECK/REPLACE X600 3.58mhz XTAL (P/N 285P029050) | |
MITSUBISHI | CK3526 | N/A | SHUTS DOWN WHEN SWITCHED ON | CHECK/REPLACE R956 (100k 1/2w) FOR OPEN | |
MITSUBISHI | CK3526 | N/A | TOP OF PICTURE IS STRETCHED VERTICALLY | CHECK/REPLACE C4E3 WITH A 1uF @ 35v TANTALUM | |
MITSUBISHI | CK3530 | N/A | NO COLOR --VIDEO IS NORMAL | CHECK C6H20 AND REPLACE IF OPEN | |
MITSUBISHI | CK35304 | N/A | SIDES OF PICTURE IS BOWED OUTWARD | CHECK/REPLACE C537 (3.3uF @ 100v) | |
MITSUBISHI | CK3530R | N/A | REPEATED FAILURE OF Q532 | CHECK/REPLACE IC501 (P/N# 272P132010) | |
MITSUBISHI | CK3530R | N/A | NO VIDEO AND RAISING SCREEN CONTROL CAUSES RETRACE LINES | CHECK/REPLACE C233 FOR LEAKAGE | |
MITSUBISHI | CK3530R | N/A | INTERMITTENT VIDEO | CHECK/REPLACE C623 (470uF @ 10v) | |
MITSUBISHI | CK3530R | N/A | GRAINY VIDEO WITH GHOSTING | CHECK/REPLACE C232 (10uF @ 50v) | |
MITSUBISHI | CK3530R | N/A | NARROW PICTURE | CHECK/REPLACE IC501 (P/N# 272P239040) AND Q505 | |
MITSUBISHI | CK3531 | N/A | NEGATIVE PICTURE - NO LUMINANCE | CHECK/REPLACE DL202 (P/N# 337P113020) | |
MITSUBISHI | CK3531 | N/A | HORIZONTAL OUTPUT FAILURE | CHECK/REPLACE HORZ. OUTPUT TRANSISTOR AND ADD A 33 ohm 1/4 WATT RESISTOR BETWEEN BASE AND EMITTER | |
MITSUBISHI | CK3531 | N/A | TOP OF PICTURE IS STRETCHED VERTICALLY | CHECK/REPLACE C4E3 WITH A 1uF @ 35v TANTALUM | |
MITSUBISHI | CK3531R | N/A | NO AUDIO OR VIDEO | CHECK/REPLACE R8A2 AND R8A3 | |
MITSUBISHI | CK3531R | N/A | REDUCED WIDTH AND SIDE PINCUSHION PROBLEMS | CHECK/REPLACE C546 (.027uF @ 400v) | |
MITSUBISHI | CK3531R | N/A | DARK PICTURE | CHECK/REPLACE C956 (2.2uF @ 200v) (P/N# 181P192020) | |
MITSUBISHI | CK3531R | N/A | NO VIDEO - OSD IS NORMAL | CHECK/REPLACE IC2S2 (P/N# 266P064010) | |
MITSUBISHI | CK3536 | N/A | TOP OF PICTURE IS STRETCHED VERTICALLY | CHECK/REPLACE C4E3 WITH A 1uF @ 35v TANTALUM | |
MITSUBISHI | CK35402 | N/A | NO POWER | CHECK/REPLACE L9090 (P/N# 411P012010) | |
MITSUBISHI | CK3551 | N/A | AFT DRIFTS | CHECK C719 FOR OPEN | |
MITSUBISHI | CK3553R | N/A | PICTURE WAVERING | CHECK/REPLACE C918 (10uF @ 100v) | |
MITSUBISHI | CK3553R | N/A | NO HIGH VOLTAGE | CHECK/REPLACE R908 FOR OPEN OR INCREASE IN VALUE | |
MITSUBISHI | CK3555 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT R3B5 LOCATED TO THE RIGHT OF IC3A1 | |
MITSUBISHI | CK3556 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT R3B5 LOCATED TO THE RIGHT OF IC3A1 | |
MITSUBISHI | CK3557 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT R3B5 LOCATED TO THE RIGHT OF IC3A1 | |
MITSUBISHI | CK3560R | N/A | PICTURE IS SNOWY ON SOME CHANNELS | CHECK/REPLACE C712 (2200uF @ 16v) | |
MITSUBISHI | CK3560R | N/A | NO COLOR IN THE PIP PICTURE | CHECK/REPLACE LPF7101 (349P159010) | |
MITSUBISHI | CK35804 | N/A | HORIZ. TEARING AND SQUEAL | CHECK/REPLACE R533 (15k @ 1/4w) | |
MITSUBISHI | CK35804 | N/A | LOW LEVEL AUDIO HUM AND DOES NOT INCREASE WITH VOLUME | ADD A FERRITE BEAD TO LEAD 'LR' (P/N# KIT-BEAD) | |
MITSUBISHI | CK35FX2 | N/A | NO PICTURE BUT SOUND OK | CHECK/REPLACE C927 (47uF @ 350v) | |
MITSUBISHI | CK35FX2 | N/A | REMOTE NOT WORKING | CHECK/REPLACE Q7S4 (P/N# 260P603010) *** MUST BE GERERIC DTA123ES *** | |
MITSUBISHI | CK35FX2 | N/A | AFT SEARCHES WHEN CHANNELS ARE CHANGED AND THEN LOCKS IN AFTER A FEW SECONDS | CHECK/REPLACE IC701 (P/N# 263P557020) | |
MITSUBISHI | CK35FX2 | N/A | DEAD SET - R901 ON S-POWER PCB OPEN | CHECK/REPLACE R901 (2.2?@ 5w), C7H8 (0.01uF @ 25v), OR K9X1 RELAY (P/N# 287P049030) | |
MITSUBISHI | CK35FX2 | N/A | DARK PICTURE WITH LINES | CHECK/REPLACE C927 (47uF @ 350v) | |
MITSUBISHI | CK35FX2 | N/A | NO POWER | CHECK/REPLACE R9B8 (P/N# 102P080010) 2.2 @ 5w. | |
MITSUBISHI | CK35MX2 | N/A | WON'T TUNE SOME CHANNELS | CHECK/REPLACE C563 (10 F @ 250v) | |
MITSUBISHI | CK35MX2 | N/A | WASHED OUT VIDEO - MAY IMPROVED AFTER 10-15 MINUTES | CHECK/REPLACE C7001,C7026,C7036 (4.7uF@35v P/N# 181P504090) | |
MITSUBISHI | CK35MX2 | N/A | NO PIP VIDEO | CHECK/REPLACE IC2002 (P/N# 272P394010) | |
MITSUBISHI | CK35MX2 | N/A | WON'T TUNE SOME CHANNELS | CHECK/REPLACE C563 (10uF @ 250V) | |
MITSUBISHI | CK35MX2 | N/A | NO VIDEO | CHECK/REPLACE R7002 (P/N# 103P401050 - 150? | |
MITSUBISHI | CK35MX3 | N/A | WASHED OUT VIDEO - MAY IMPROVED AFTER 10-15 MINUTES | CHECK/REPLACE C7001,C7026,C7036 (4.7uF@35v P/N# 181P504090) | |
MITSUBISHI | CM2501 | N/A | NO AUDIO | CHECK/REPLACE C3C1 AND C3D3 (470uF @ 16v) | |
MITSUBISHI | CS13101 | N/A | NO OSD | CHECK/REPLACE D719 (P/N# 264P501010) | |
MITSUBISHI | CS13101 | N/A | HIGH PITCHED NOISE IN THE AUDIO | CHECK/REPLACE C743 (4.7uF @ 50v) | |
MITSUBISHI | CS13101 | N/A | INTERMITTENTLY PICTURE GOES TO BLACK AND WHITE AND PULLS TO THE LEFT ABOUT 2 INCHES - BLACK BAR DOWN RIGHT SIDE | CHECK/REPLACE IC101 (P/N# 272P837030) | |
MITSUBISHI | CS13102 | N/A | SNOWY PICTURE | CHECK/REPLACE R112 (56k ) | |
MITSUBISHI | CS13102 | N/A | INTERMITTENTLY PICTURE GOES TO BLACK AND WHITE AND PULLS TO THE LEFT ABOUT 2 INCHES - BLACK BAR DOWN RIGHT SIDE | CHECK/REPLACE IC101 (P/N# 272P837030) | |
MITSUBISHI | CS13102 | N/A | HIGH PITCHED NOISE IN THE AUDIO | CHECK/REPLACE C743 (4.7uF @ 50v) | |
MITSUBISHI | CS13103 | N/A | NO VIDEO ON OSD | CHECK/REPLACE C854 (0.01uF @ 1.4kv) | |
MITSUBISHI | CS13201 | N/A | INTERMITTENTLY PICTURE GOES TO BLACK AND WHITE AND PULLS TO THE LEFT ABOUT 2 INCHES - BLACK BAR DOWN RIGHT SIDE | CHECK/REPLACE IC101 (P/N# 272P837030) | |
MITSUBISHI | CS1342 | N/A | NO PICTURE- R409 IS OPEN | JUMPER #151 SHORTONG TO THE PICTURE CONTROL,REDRESS | |
MITSUBISHI | CS1343 | N/A | NO PICTURE | CHECK R409 FOR OPEN | |
MITSUBISHI | CS1344 | N/A | NO PICTURE | CHECK R409 FOR OPEN | |
MITSUBISHI | CS1346 | N/A | INTERMITTENT OR NO COLOR | CHECK/REPLACE C617 FOR SHORT OR LEAKY | |
MITSUBISHI | CS1346R | N/A | INTERMITTENT VIDEO AND SOUND | CHECK/REPLACE R527 (12?@ 1w) | |
MITSUBISHI | CS1346R | N/A | NO VERTICAL DEFLECTION | CHECK/REPLACE IC401,R522 AND D504 | |
MITSUBISHI | CS1347 | N/A | DISTORTED AUDIO--POSSIBLY THERMAL | CHECK/REPLACE IC201 (TA8680N) | |
MITSUBISHI | CS1347 | N/A | NO TUNING | CHECK/REPLACE C514 (10uF @ 100v) AND D507 (P/N# 181P356090) | |
MITSUBISHI | CS1347 | N/A | DARK PICTURE | CHECK/REPLACE C213 (10uF @ 50v) AND C204 (1uF @ 50v) | |
MITSUBISHI | CS1347 | VL | NO AUDIO OR AUDIO DISTORTION | REPLACE IC201 | |
MITSUBISHI | CS1347R | N/A | SHUTS DOWN WHEN POWERED UP | CHECK/REPLACE R508 (27k?1/2w) | |
MITSUBISHI | CS1347R | N/A | INTERMITTENT TUNING WHEN SET IS COLD | CHECK/REPLACE C514 (10uF @ 100v) | |
MITSUBISHI | CS1352 | N/A | CONTRAST CONTROL HAS NO EFFECT ON THE PICTURE | CHECK IC201 AND C210 | |
MITSUBISHI | CS1352 | N/A | CONTRAST CONTROL HAS NO EFFECT | CHECK C210 FOR SHORTS | |
MITSUBISHI | CS13RX2 | N/A | MEMORY LOST WHEN POWER IS SWITCHED OFF | CHECK/REPLACE R764 (10k @ 1/4w) | |
MITSUBISHI | CS13RX2 | N/A | INTERMITTENT SHUTDOWN WHEN CHANGING CHANNELS | CHECK/REPLACE C515 (10uF @ 100v) | |
MITSUBISHI | CS1903 | N/A | PICTURE SHRUNK ON ALL 4 SIDES | CHECK/REPLACE L554 | |
MITSUBISHI | CS1940 | N/A | NO COLOR | CHECK C201 (SUSPECT LEAKAGE) | |
MITSUBISHI | CS1944 | N/A | NO VIDEO-TUNER INOPERATIVE | NO MB VOLTAGE AT TUNER,R119 IS OPEN. LEAD DRESS SHORT | |
MITSUBISHI | CS1944 | N/A | NO SOUND BUT PICTURE OK | CHECK/REPLACE IC101 AND R118 | |
MITSUBISHI | CS1944R | N/A | DISTORTED AUDIO | CHECK/REPLACE R343 (82k @ 1/4w.) FOR OPEN | |
MITSUBISHI | CS1945 | N/A | NO VERTICAL SWEEP | CHECK/REPLACE C412 FOR OPEN | |
MITSUBISHI | CS1946 | N/A | INTERMITTENT OR NO COLOR | CHECK/REPLACE C617 FOR SHORT OR LEAKY | |
MITSUBISHI | CS1946 | N/A | NO VIDEO | CHECK/REPLACE C610 | |
MITSUBISHI | CS1946 | N/A | NO AUDIO | CHECK/REPLACE L301 | |
MITSUBISHI | CS1946 | N/A | SHORT VERT.SWEEP-FAST ROLL-INTERMITTENT | CHECK C404 (.47uF TANTALUM) | |
MITSUBISHI | CS1946 | TSB | JAGGED WHITE LINE ON RIGHT SIDE ON DECODED CHAN. | REMOVE R213--ADD A 1k IN SERIES WITH A 470 OHM IN ITS | |
MITSUBISHI | CS1946R | N/A | SLOW TUNER LOCK | CHECK/REPLACE D907 FOR LEAKAGE | |
MITSUBISHI | CS1946R | N/A | INTERMITTENTLY GOES INTO SHUTDOWN | CHECK/REPLACE D510 | |
MITSUBISHI | CS1951 | N/A | WILL NOT TUNE ANY CHANNELS | CHECK/REPLACE R745 (10k ) AND R794 (6.8k ) | |
MITSUBISHI | CS1982 | N/A | AUDIO HUM OR DISTORTED AUDIO | REMOVE C3P4 AND ADD A SMALL AMOUNT OF SILICONE OR | |
MITSUBISHI | CS1982 | N/A | VERTICAL JITTER AND VERTICAL HOLD INSTABILITY | REPLACE 1UFD 35V CAPACITOR C405 DEFECTIVE CAPACITOR | |
MITSUBISHI | CS1982 | N/A | VERT.JITTER AND VERT. HOLD INSTABILITY | CHECK C405 (VALUE MAY BE OK BUT HAVE HIGH INTERNAL | |
MITSUBISHI | CS1984 | N/A | NO VIDEO-CRT CHANNEL DISPLAY IS DISTORTED | TRANSISTOR Q7K8 SHORTED ON CRT-DISPLAY PCB | |
MITSUBISHI | CS2001 | N/A | HIGH PITCHED SQUEAL IN THE AUDIO | CHECK TO SEE IF C795 IS INSTALLED (10uF @ 16 WV) | |
MITSUBISHI | CS2002 | N/A | NO VIDEO | CHECK/REPLACE C204 (1uF @ 50v) | |
MITSUBISHI | CS2002 | N/A | BRIGHTNESS FLUCUATES | CHECK/REPLACE C612 (470uF @ 16v) CHECK/RESOLDER CONNECTIONS ON FLYBACK - ESPECIALLY GROUNDS | |
MITSUBISHI | CS2005 | N/A | BRIGHT SCREEN WITH RETRACE LINES | CHECK/REPLACE F951,R560 AND C563 | |
MITSUBISHI | CS2005R | N/A | UNSTABLE SYNC | CHECK/REPLACE R226 (22k) FOR OPEN | |
MITSUBISHI | CS2005R | N/A | NOT TUNING PROPERLY OR NOT TUNING THE RIGHT CHANNEL | CHECK/REPLACE C583 (10uF @ 100v) | |
MITSUBISHI | CS2010 | N/A | NO CONTROL OF BRIGHTNESS OR CONTRAST BUT THE OSD DISPLAY DOES MOVE. | CHECK/REPLACE D210 FOR SHORT OR LEAKAGE | |
MITSUBISHI | CS20101 | N/A | NO PICTURE AND OSD IS LOCATED TOO HIGH ON THE SCREEN | CHECK/REPLACE IC101 (P/N# 272P837030) | |
MITSUBISHI | CS20101 | N/A | INTERMITTENTLY PICTURE GOES TO BLACK AND WHITE AND PULLS TO THE LEFT ABOUT 2 INCHES - BLACK BAR DOWN RIGHT SIDE | CHECK/REPLACE IC101 (P/N# 272P837030) | |
MITSUBISHI | CS20101 | N/A | INTERMITTENTLY WILL NOT TURN ON | CHECK/RESOLDER CONNECTIONS ON D507 AND C534 | |
MITSUBISHI | CS20102 | N/A | INTERMITTENTLY PICTURE GOES TO BLACK AND WHITE AND PULLS TO THE LEFT ABOUT 2 INCHES - BLACK BAR DOWN RIGHT SIDE | CHECK/REPLACE IC101 (P/N# 272P837030) | |
MITSUBISHI | CS2011 | N/A | NO SOUND /NO RASTER-LED DISPLAY-ON/OFF RELAY OK | 134 VOLT Bt LINE READS 155 V. REPLACE DEFECTIVE REGUL | |
MITSUBISHI | CS2011 | N/A | NO SOUND/NO RASTER-LED DISPLAY ON-RELAY TOGGLES | CHECK IC991 | |
MITSUBISHI | CS2013 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT JUMPER WIRE #207 LOCATED BETWEEN IC331 | |
MITSUBISHI | CS2013 | N/A | X-RAY PROTECT IS INTERMITTENTLY ACTIVATED | CHECK FOR PROPER GROUNDING OF D581,R583 AND R584. | |
MITSUBISHI | CS2013 | N/A | INTERMITT. NO AUDIO VOL. OR VOL. FIXED AT A LOW | C720 (UNDER MAIN-PCB) INTERMITT. SHORTING TO THE JUMP | |
MITSUBISHI | CS2013 | N/A | VIDEO DISPLAY JITTERS VERTICALLY | C453 COULD BE MISSING (100uF @ 35V) OR C452 HAS | |
MITSUBISHI | CS2014 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT JUMPER WIRE #207 LOCATED BETWEEN IC331 | |
MITSUBISHI | CS2014 | N/A | X-RAY PROTECT IS INTERMITTENTLY ACTIVATED | CHECK FOR PROPER GROUNDING OF D581,R583 AND R584. | |
MITSUBISHI | CS2014 | N/A | VIDEO DISPLAY JITTERS VERTICALLY | C453 COULD BE MISSING (100uF @ 35V) OR C452 HAS | |
MITSUBISHI | CS2015R | N/A | NO VIDEO BUT OSD OK | CHECK/REPLACE Q720 (P/N# 260P338040) | |
MITSUBISHI | CS2015R | N/A | CANNOT LOCK CHANNELS 15 AND 16 | CHECK/REPLACE C583 | |
MITSUBISHI | CS2015R | N/A | NO OR LOW AUDIO | CHECK/REPLACE Q3A1 (P/N# 260P338040) | |
MITSUBISHI | CS2015R | N/A | NO AFT AND WILL NOT ADJUST | CHECK/REPLACE R752 FOR OPEN (120k) | |
MITSUBISHI | CS20201 | N/A | LOW BRIGHTNESS | CHECK/REPLACE Q605 FOR SHORT | |
MITSUBISHI | CS20201 | N/A | NO OSD | CHECK/REPLACE D719 (P/N# 264P501010) | |
MITSUBISHI | CS20201 | N/A | WILL NOT TURN ON | CHECK/REPLACE C524 (P/N# 181P355080) | |
MITSUBISHI | CS20201 | N/A | INTERMITTENTLY PICTURE GOES TO BLACK AND WHITE AND PULLS TO THE LEFT ABOUT 2 INCHES - BLACK BAR DOWN RIGHT SIDE | CHECK/REPLACE IC101 (P/N# 272P837030) | |
MITSUBISHI | CS20201 | N/A | PICTURE SHIFTED TO THE LEFT | CHECK/REPLACE IC101 (P/N# 272P837030) | |
MITSUBISHI | CS20203 | N/A | NO VERTICAL SWEEP OR SHORT VERTICAL SWEEP | CHECK/REPLACE IC751 (P/N# VHIKA78091-1) | |
MITSUBISHI | CS20203 | N/A | WHITE LINE ON RIGHT SIDE | CHECK/REPLACE IC201 (P/N# RH-IX2573CEZZ) | |
MITSUBISHI | CS20203 | N/A | SHORT VERTICAL SWEEP - BLANK WHITE RASTER - NO SOUND | CHECK/REPLACE IC751 (7809 - 9 VOLT REGULATOR) | |
MITSUBISHI | CS2043 | N/A | DISTORTED SOUND AT LOW VOLUME | CHECK R301 FOR CHANGED VALUE | |
MITSUBISHI | CS2043R | N/A | SET WORKS NORMAL BUT THE REMOTE IS ERRATIC | CHECK/REPLACE REMOTE RECEIVER ASSEMBLY | |
MITSUBISHI | CS2043R | N/A | NO VERTICAL SWEEP | CHECK/REPLACE C412 FOR OPEN | |
MITSUBISHI | CS2044 | N/A | BLACK BAR IN PIX-BRIGHTNESS AFFECTS ITS POSITION | CHECK C294 | |
MITSUBISHI | CS2045 | N/A | DARK SCREEN--G1 GIVES RASTER W/RETRACE(SOUND OK) | CHECK R216 FOR OPEN | |
MITSUBISHI | CS2046 | N/A | AFT WILL NOT LOCK | CHECK/REPLACE D724 FOR LEAKY | |
MITSUBISHI | CS2046 | N/A | UNIT SHUTS DOWN IMMEDIATELY AT TURN ON | CHECK/REPLACE IC901 FOR SHORT | |
MITSUBISHI | CS2046 | TSC | JAGGED WHITE LINE ON RIGHT SIDE ON DECODED CHAN. | REMOVE R213--ADD A 1k IN SERIES WITH A 470 OHM IN ITS | |
MITSUBISHI | CS2046R | N/A | FOCUS AND SCREEN CONTROLS INTERACT | CHECK/REPLACE FLYBACK XFRM. | |
MITSUBISHI | CS2046R | N/A | NO OR INTERMITTENT COLOR | CHECK/REPLACE C612 FOR OPEN | |
MITSUBISHI | CS2047 | N/A | NO VIDEO | CHECK/REPLACE C204 (1uF @ 50v) | |
MITSUBISHI | CS2047 | N/A | VERTICAL RETRACE LINES AT THE TOP OF THE PICTURE | CHECK/REPLACE C510 | |
MITSUBISHI | CS2047 | N/A | BRIGHTNESS FLUCUATES | CHECK/REPLACE C612 (470uF @ 16v) CHECK/RESOLDER CONNECTIONS ON FLYBACK - ESPECIALLY GROUNDS | |
MITSUBISHI | CS2047 | VL | NO AUDIO OR AUDIO DISTORTION | REPLACE IC201 | |
MITSUBISHI | CS2051R | N/A | INCORRECT BAND SWITCHING VOLTAGE | CHECK/REPLACE C931 (10uF @ 200) | |
MITSUBISHI | CS2051R | N/A | NO VHF LOW OR HIGH BAND - UHF IS NORMAL | CHECK/REPLACE C931 AND D931 FOR SHORT | |
MITSUBISHI | CS2052 | N/A | TUNER DRIFTS | CHECK/REPLACE C931 (10uF @ 220v) | |
MITSUBISHI | CS2052R | N/A | NO VHF LOW OR HIGH BAND - UHF IS NORMAL | CHECK/REPLACE C931 AND D931 FOR SHORT | |
MITSUBISHI | CS2053 | N/A | POOR HORZ. LOCK AND RETRACE LINES | 13.9V SUPPLY LOW--CHECK R553 | |
MITSUBISHI | CS2053 | N/A | POPPING NOISE FROM SET WHEN REC. A NON STEREO SI | C380 (100UFD,25V) MISSING FROM MAIN-PCB (CONNECTED TO | |
MITSUBISHI | CS2053 | N/A | INTERMITTENT LOSS OF VERTICAL DEFLECTION | CHECK/REPLACE R417 (10 2w.) | |
MITSUBISHI | CS2054 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT JUMPER WIRE #207 LOCATED BETWEEN IC331 | |
MITSUBISHI | CS2054 | N/A | POPPING NOISE FROM SET WHEN REC. A NON STEREO SI | C380 (100UFD,25V) MISSING FROM MAIN-PCB (CONNECTED TO | |
MITSUBISHI | CS2054 | N/A | X-RAY PROTECT IS INTERMITTENTLY ACTIVATED | CHECK FOR PROPER GROUNDING OF D581,R583 AND R584. | |
MITSUBISHI | CS2054R | N/A | NO AUDIO-VOLT. AT PIN 30 OF IC3A1 IS HIGH (5V) | RESISTOR R737 BETWEEN PIN 10 OF IC701 & 12V SUPPLY IS | |
MITSUBISHI | CS2056 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT JUMPER WIRE #207 LOCATED BETWEEN IC331 | |
MITSUBISHI | CS2056 | N/A | X-RAY PROTECT IS INTERMITTENTLY ACTIVATED | CHECK FOR PROPER GROUNDING OF D581,R583 AND R584. | |
MITSUBISHI | CS2058 | N/A | NO VIDEO SIGNAL OR SNOW FROM TUNER OR EXT 1 COMPOSITE-- EXT 1 'S' INPUT FUNCTIONS OK. | CHECK/REPLACE IC2A0 | |
MITSUBISHI | CS2058 | N/A | PICTURE SHIFTED ONE INCH TO THE RIGHT | CHECK R585 | |
MITSUBISHI | CS2060 | N/A | FLYBACK MAKING LOUD NOISES-PIX TEARS AT CENTER | CHECK C505 (HORZ.AFC LOCK) | |
MITSUBISHI | CS2060 | N/A | NO VIDEO SIGNAL OR SNOW FROM TUNER OR EXT 1 COMPOSITE-- EXT 1 'S' INPUT FUNCTIONS OK. | CHECK/REPLACE IC2A0 | |
MITSUBISHI | CS2062 | N/A | NO SOUND--AUDIBLE HUM | CHECK C113 | |
MITSUBISHI | CS2062 | N/A | NO SOUND-LOW LEVEL HUM ONLY | CHECK IC101 OR C113 | |
MITSUBISHI | CS2070 | N/A | ERRATIC TUNER OPERATION | CHECK/REPLACE R725 (22k) | |
MITSUBISHI | CS2070R | N/A | NO AUDIO | CHECK/REPLACE IC3A0 (P/N# 266P934020) | |
MITSUBISHI | CS2070R | N/A | DARK OR NO PICTURE | CHECK/REPLACE R680 (100k) ON CRT BOARD | |
MITSUBISHI | CS2078 | N/A | CONTINUALLY SCANS THROUGH CHANNELS | CHECK/REPLACE R115 (100k 1/4w) FOR OPEN OR CHANGE OF VALUE | |
MITSUBISHI | CS2085 | N/A | NO LOW BAND VHF | CHECK/REPLACE C931 | |
MITSUBISHI | CS2087 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT JUMPER WIRE #207 LOCATED BETWEEN IC331 | |
MITSUBISHI | CS2087 | N/A | X-RAY PROTECT IS INTERMITTENTLY ACTIVATED | CHECK FOR PROPER GROUNDING OF D581,R583 AND R584. | |
MITSUBISHI | CS20RX1 | N/A | MENU TOO LARGE FOR SCREEN | CHECK/REPLACE C405 | |
MITSUBISHI | CS20RX1 | N/A | NO COLOR | CHECK/REPLACE C713 (4.7uF @ 50v) | |
MITSUBISHI | CS20RX2 | N/A | MENU TOO LARGE FOR SCREEN | CHECK/REPLACE C405 | |
MITSUBISHI | CS20SX1 | N/A | INSUFFICIENT BRIGHTNESS | CHECK/REPLACE D204 (3v 1/4w ZENER) | |
MITSUBISHI | CS20SX1 | N/A | EXCESSIVE VERTICAL HEIGHT | CHECK/REPLACE C405 (1uF @ 25v) | |
MITSUBISHI | CS2184 | N/A | HORIZ. LINES APPEAR ON UHF CHAN. AFTER RECV.WARM | DEFECTIVE C742 ON MAIN-PCB (CONNECTED TO IC703,PIN 8) | |
MITSUBISHI | CS2192R | N/A | NO VERTICAL SWEEP | CHECK/REPLACE C463 AND C464 | |
MITSUBISHI | CS2503 | N/A | NO COLOR | CHECK/REPLACE BPF201 (NO CHROMA AT THE BASE OF Q2005) | |
MITSUBISHI | CS2556R | N/A | NO VERTICAL HOLD AND SET HAS KEYSTONE DISTORTION | CHECK/REPLACE C565 (1000uF @ 35v) | |
MITSUBISHI | CS2571 | N/A | RETRACE LINES IN THE PICTURE | CHECK/REPLACE R531 FOR OPEN | |
MITSUBISHI | CS2571 | N/A | LOW BAND VHF IS DETUNED | CHECK/REPLACE D537 FOR LEAKAGE (P/N # 264P222020) | |
MITSUBISHI | CS2571R | N/A | SMEARY PICTURE WITH RETRACE LINES | CHECK/REPLACE C545 (4.7uF @ 250v) | |
MITSUBISHI | CS2575 | N/A | INTERMITTENT SHUTDOWN OF SET | CHECK D582 FOR LEAKAGE | |
MITSUBISHI | CS2594 | N/A | SEVERE VERTICAL OVERSCAN | CHECK C463 AND C464 | |
MITSUBISHI | CS2602 | TM2B | JAGGED WHITE LINE ON RIGHT SIDE ON DECODED CHAN. | REMOVE R503--ADD A 1k IN SERIES WITH A 470 OHM IN ITS | |
MITSUBISHI | CS2602R | N/A | NO VERTICAL HOLD AND SET HAS KEYSTONE DISTORTION | CHECK/REPLACE C565 (1000uF @ 35v) | |
MITSUBISHI | CS2610 | N/A | NO CONTROL OF BRIGHTNESS OR CONTRAST BUT THE OSD DISPLAY DOES MOVE. | CHECK/REPLACE D210 FOR SHORT OR LEAKAGE | |
MITSUBISHI | CS2610 | N/A | OSD IS BLACK | CHECK/REPLACE C230 FOR OPEN | |
MITSUBISHI | CS2610 | N/A | EXCESSIVE BRIGHTNESS | CHECK/REPLACE D552 (264P231010) AND R560 FOR OPEN | |
MITSUBISHI | CS2610 | N/A | NO SYNC | CHECK/REPLACE IC2A0 | |
MITSUBISHI | CS2610 | UM2B | JAGGED WHITE LINE ON RIGHT SIDE ON DECODED CHAN. | REMOVE R503--ADD A 1k IN SERIES WITH A 470 OHM IN ITS | |
MITSUBISHI | CS2610R | N/A | BRIGHT SCREEN WITH RETRACE LINES | CHECK/REPLACE D552 (P/N# 264P231010) AND R560 (P/N# 103P338010) | |
MITSUBISHI | CS2610R | N/A | BLACK ON SCREEN DISPLAY | CHECK/REPLACE R680 FOR A CHANGE OF VALUE | |
MITSUBISHI | CS2610R | N/A | CHANNEL/TIME DISPLAY MISSING AT CHANNEL CHANGE | CHECK/REPLACE D720 (P/N# 264P045040) | |
MITSUBISHI | CS2610R | N/A | INTERMITTENT OR NO AUDIO | CHECK/REPLACE IC201 OR L300 (327P073020) | |
MITSUBISHI | CS2610R | N/A | GREEN PICTURE | CHECK/REPLACE Q681 (P/N# 260P559010) | |
MITSUBISHI | CS2610R | N/A | INTERMITTENT OR NO SOUND | CHECK/REPLACE BP330 (4.5MHz CERAMIC FILTER) | |
MITSUBISHI | CS2610R | N/A | PICTURE BREATHING AND HAS RETRACE LINES | CHECK/REPLACE R521 (1.2 ohm) | |
MITSUBISHI | CS2610RC | N/A | NO MID OR HYPER BAND CHANNELS | CHECK/REPLACE C583 (10uF @ 100v) | |
MITSUBISHI | CS2611 | N/A | NO CONTROL OF BRIGHTNESS OR CONTRAST BUT THE OSD DISPLAY DOES MOVE. | CHECK/REPLACE D210 FOR SHORT OR LEAKAGE | |
MITSUBISHI | CS2611 | N/A | ROLLS ON SOME CABLE CHANNELS | CHECK/REPLACE Q101 (260P419030) FOR LEAKAGE | |
MITSUBISHI | CS2611 | UM2B | JAGGED WHITE LINE ON RIGHT SIDE ON DECODED CHAN. | REMOVE R503--ADD A 1k IN SERIES WITH A 470 OHM IN ITS | |
MITSUBISHI | CS2611R | N/A | INTERMITTENT OR NO SOUND | CHECK/REPLACE BP330 (4.5MHz CERAMIC FILTER) | |
MITSUBISHI | CS2611R | N/A | INTERMITTENT OR NO AUDIO | CHECK/REPLACE IC201 OR L300 (327P073020) | |
MITSUBISHI | CS26201 | N/A | INTERMITTENTLY SET HAS REDUCED HEIGHT | CHECK/REPLACE IC551 (12v REGULATOR - P/N# 266P934020) | |
MITSUBISHI | CS26201 | N/A | DEAD SET - NO POWER | CHECK/REPLACE C510 (100uF @ 10v) | |
MITSUBISHI | CS26201 | N/A | BUZZ IN THE SOUND | ADD GROUND WIRE FROM TUNER GRD. TAB TO GRD. FOIL NEAR S-VHS JACK - ADD WIRE FROM GRD.NEAR BU(TUNER) TO PIN 10 0F IC3001 | |
MITSUBISHI | CS26201 | N/A | INTERMITTENT BUZZ - ONLY APPEARS ON SOME CHANNELS | CHECK/REPLACE C116 | |
MITSUBISHI | CS26201 | N/A | WHITE BARS ACROSS TOP OF THE PICTURE | CHECK/REPLACE R457 (33k @ 1/4w) | |
MITSUBISHI | CS26301 | N/A | NO LUMINANCE BUT COLOR IS OK | CHECK/REPLACE DL2032 (P/N# 337P189010) | |
MITSUBISHI | CS26301 | N/A | NO AUDIO ON LOW BAND CABLE CHANNELS | ADJUST AGC LEVEL PER SERVICE MANUAL | |
MITSUBISHI | CS26301 | N/A | BUZZ IN THE AUDIO | ADD A GROUND WIRE TO THE HEATSINK TAB OF IC401 AND THE OTHER END TO PIN 4 OF 'FP' CONNECTOR | |
MITSUBISHI | CS26301 | N/A | INTERMITTENT SHUTDOWN | CHECK/REPLACE R550 (120 @ 3w) AND CONNECTIONS ON T552 | |
MITSUBISHI | CS26301 | N/A | DISTORTED AUDIO | CHECK/REPLACE R300 (330 1/4w) AND C307 (47uF @ 50v) | |
MITSUBISHI | CS26301 | N/A | CHANNEL DISPLAY JUMPS,GREEN PIP PICTURE AND SHUTS DOWN WHEN MENU IS ACTIVATED | CHECK/REPLACE R752 (5.6k ) | |
MITSUBISHI | CS2642 | N/A | DISTORTED AUDIO THRU SPEAKERS - LINE OUTPUTS ARE OK | CHECK/REPLACE R331 FOR OPEN | |
MITSUBISHI | CS2642 | N/A | VERT.FOLDOVER AT BOTTOM OF PIX. | CHECK C407 FOR OPEN | |
MITSUBISHI | CS2643 | N/A | BRIGHTNESS CTRL. HAS NO EFFECT-PIX LOOKS NORMAL | CHECK R663 | |
MITSUBISHI | CS2643 | N/A | DISTORTED AUDIO THRU SPEAKERS - LINE OUTPUTS ARE OK | CHECK/REPLACE R331 FOR OPEN | |
MITSUBISHI | CS2644 | N/A | DISTORTED AUDIO THRU SPEAKERS - LINE OUTPUTS ARE OK | CHECK/REPLACE R331 FOR OPEN | |
MITSUBISHI | CS2651 | N/A | WHEN TUNED TO CHAN. 6, TV RECEIVES FM STATIONS | CHECK FOR OPEN L301 OR CONNECTIONS | |
MITSUBISHI | CS2651 | N/A | DISTORTED AUDIO THRU SPEAKERS - LINE OUTPUTS ARE OK | CHECK/REPLACE R331 FOR OPEN | |
MITSUBISHI | CS2653 | N/A | VIDEO DISPLAY JITTERS VERTICALLY | C453 COULD BE MISSING (100uF @ 35V) OR C452 HAS | |
MITSUBISHI | CS2653 | N/A | NO VERTICAL SWEEP OR INTERMITTENT VERTICAL SWEEP | CHECK FOR OPEN FOIL BETWEEN D553 AND PIN #7 OF IC401 DUE TO GLUE BECOMING CORROSIVE AND EATING THROUGH COPPER TRACE | |
MITSUBISHI | CS2653 | N/A | PICTURE PULSATING HORIZONTALLY | DEFECTIVE CONNECTION AT CONNECTOR 'DX'PIN 5 (CONNET. | |
MITSUBISHI | CS2653 | N/A | DARK BAR ACROSS PICTURE | CHECK C209 FOR OPEN | |
MITSUBISHI | CS2653 | N/A | NO O.S.D. INFO DISPLAYED--PIX AND SOUND OK | CHECK R510 FOR INCREASED VALUE. | |
MITSUBISHI | CS2653 | N/A | NO H.V. | CHECK CONNECTIONS ON Q551 | |
MITSUBISHI | CS2653 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT JUMPER WIRE #207 LOCATED BETWEEN IC331 | |
MITSUBISHI | CS2653 | N/A | NO VERTICAL DEFLECTION | CHECK/REPLACE C452 | |
MITSUBISHI | CS2653 | N/A | X-RAY PROTECT IS INTERMITTENTLY ACTIVATED | CHECK FOR PROPER GROUNDING OF D581,R583 AND R584. | |
MITSUBISHI | CS2653 | N/A | D773 ON MAIN-PCB SHORTED (DIODE SHORTING ELIMIN | t5V TO PRESCALER IC IN TUNER | |
MITSUBISHI | CS2653 | N/A | SCANS THRU CHANNELS CONTINOUSLY | CHECK D717 FOR SHORT OR LEAKAGE | |
MITSUBISHI | CS2654 | N/A | NO BLUE BACKGROUND | CHECK/REPLACE IC601 (P/N# 263P299010) | |
MITSUBISHI | CS2654 | N/A | INTERFERENCE PATTERN AT LEFT EDGE OF THE PIX | CHECK C563 FOR OPEN | |
MITSUBISHI | CS2654 | N/A | D773 ON MAIN-PCB SHORTED (DIODE SHORTING ELIMIN | t5V TO PRESCALER IC IN TUNER | |
MITSUBISHI | CS2654 | N/A | X-RAY PROTECT IS INTERMITTENTLY ACTIVATED | CHECK FOR PROPER GROUNDING OF D581,R583 AND R584. | |
MITSUBISHI | CS2654 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT JUMPER WIRE #207 LOCATED BETWEEN IC331 | |
MITSUBISHI | CS2654 | N/A | VIDEO DISPLAY JITTERS VERTICALLY | C453 COULD BE MISSING (100uF @ 35V) OR C452 HAS | |
MITSUBISHI | CS2654 | N/A | NO VERTICAL DEFLECTION | CHECK/REPLACE C451 | |
MITSUBISHI | CS2654 | N/A | NO VERTICAL SWEEP OR INTERMITTENT VERTICAL SWEEP | CHECK FOR OPEN FOIL BETWEEN D553 AND PIN #7 OF IC401 DUE TO GLUE BECOMING CORROSIVE AND EATING THROUGH COPPER TRACE | |
MITSUBISHI | CS2654 | N/A | PICTURE PULSATING HORIZONTALLY | DEFECTIVE CONNECTION AT CONNECTOR 'DX'PIN 5 (CONNET. | |
MITSUBISHI | CS2654R | N/A | NO VERTICAL SWEEP | CHECK/RESOLDER CONNECTIONS BETWEEN IC401 PIN#1 AND JUNCTION OF C490 AND C452 | |
MITSUBISHI | CS2654R | N/A | NO COLOR | CHECK/REPLACE D214 (P/N# 264P502030) | |
MITSUBISHI | CS2655 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT JUMPER WIRE #207 LOCATED BETWEEN IC331 | |
MITSUBISHI | CS2655 | N/A | POWER SUPPLY TICKING--NO 130 VOLT OUTPUT | CHECK D954 SOLDER CONNECTIONS ON BOTH SIDES OF PCB | |
MITSUBISHI | CS2655 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT R3B5 LOCATED TO THE RIGHT OF IC3A1 | |
MITSUBISHI | CS2655 | N/A | 130V SUPP.BUILDS UP VERY SLOWLY | CHECK RESISTANCE OF R907 ON DEFL-PCB REPLACE IF VALUE | |
MITSUBISHI | CS2655 | N/A | 130V SUPPLY COMES UP VERY SLOW | CHECK R907 FOR INCREASE IN VALUE | |
MITSUBISHI | CS2655 | N/A | NO AUDIO IN MONO OR STEREO MODES -- SAP IS OK | CHECK FOR OPEN LPF3A0--IF ONLY NO AUDIO IN MONO THEN | |
MITSUBISHI | CS2655R | N/A | NO AUDIO ON MONO BROADCAST AND OR STEREO BROADCAST | CHECK/REPLACE LPF3A0 (P/N# 409P36001) OR LPF3A2 (P/N# 409P3602) | |
MITSUBISHI | CS2656 | N/A | INTERMITTENT OR NO TUNER VIDEO | CHECK/REPLACE C105 (47uF @ 10v) | |
MITSUBISHI | CS2656 | N/A | VIDEO STREAKING | CHECK/REPLACE Q203 MAY BE BREAKING DOWN UNDER LOAD - XSTR. MAY CHECK GOOD AND ALSO VOLTAGES | |
MITSUBISHI | CS2656 | N/A | NO CHANNELS | CHECK/REPLACE C779 (0.01uF @ 50v) | |
MITSUBISHI | CS2656 | N/A | AFT ADJUSTMENTS INOPERATIVE | CHECK C103 FOR LEAKAGE | |
MITSUBISHI | CS2656 | N/A | NO OR INTERMITTENT TUNER VIDEO | CHECK/REPLACE C110 FOR SHORT | |
MITSUBISHI | CS2656 | N/A | STRETCHED VERTICALLY AT TOP OF PIX | CHECK C565 FOR OPEN | |
MITSUBISHI | CS2656 | N/A | SHORT VERTICAL SWEEP | CHECK/REPLACE C618 (4.7uF @ 50v) | |
MITSUBISHI | CS2656 | N/A | NO AUDIO | CHECK C335 | |
MITSUBISHI | CS2656 | TM2B | JAGGED WHITE LINE ON RIGHT SIDE ON DECODED CHAN. | REMOVE R503--ADD A 1k IN SERIES WITH A 470 OHM IN ITS | |
MITSUBISHI | CS2656R | N/A | NO COLOR OR UNSTABLE COLOR SYNC. | CHECK/REPLACE R401 FOR OPEN OR CHANGE IN VALUE | |
MITSUBISHI | CS2656R | N/A | PIX PULLED IN ON THE SIDES AND PICTURE ROLLS | CHECK/RESOLDER CONNECTIONS ON IC951 | |
MITSUBISHI | CS2656R | N/A | AFT SEARCHES OR HUNTS | CHECK/REPLACE Q203 FOR SHORT OR LEAKAGE | |
MITSUBISHI | CS2657 | N/A | WILL NOT TUNE SUPER BAND BETWEEN 24 AND 28 | CHECK FOR OPEN DIODE D701 | |
MITSUBISHI | CS2657 | N/A | NO STANDBY 12 VOLTS | RESISTOR R591 INCREASED IN VALUE | |
MITSUBISHI | CS2657 | N/A | INTERMITTENT OR NO TUNER VIDEO | CHECK/REPLACE C773 (P/N# 470uF @ 50v) | |
MITSUBISHI | CS2657 | N/A | NO SUPER BAND CABLE CHANNELS | CHECK D701 FOR OPEN | |
MITSUBISHI | CS2657 | TM3A | JAGGED WHITE LINE ON RIGHT SIDE ON DECODED CHAN. | REMOVE R503--ADD A 1k IN SERIES WITH A 470 OHM IN ITS | |
MITSUBISHI | CS2658 | N/A | NO STANDBY 12 VOLTS | RESISTOR R591 INCREASED IN VALUE | |
MITSUBISHI | CS2658 | TM3A | JAGGED WHITE LINE ON RIGHT SIDE ON DECODED CHAN. | REMOVE R503--ADD A 1k IN SERIES WITH A 470 OHM IN ITS | |
MITSUBISHI | CS2667 | N/A | OSD JITTERS AND INTERMITTENT POWER | CHECK/REPLACE C3M9 | |
MITSUBISHI | CS2669 | N/A | ALL REGULATED VOLTAGES TWICE NORMAL VALUE | CHECK C913 (T901 PIN #5) | |
MITSUBISHI | CS2669 | N/A | RASTER SHORT 1' EACH SIDE--VERTICAL LINES BOWED | CHECK C516 FOR SHORTS KILLING B+ TO PINCUSHION BD. | |
MITSUBISHI | CS2669 | N/A | POWER SUPPLY CHIRPS WHEN SET IS PLUGGED IN AND SET NOT TURNED ON | CHECK/REPLACE C913 AND C955 | |
MITSUBISHI | CS2669 | N/A | RETRACE LINES IN PICTURE | CHECK/REPLACE C955 | |
MITSUBISHI | CS2669R | N/A | SCANNING LINES JITTER | CHECK/REPLACE 1k DAMPING RESISTOR LOCATED ACROSS THE YOKE WINDINGS | |
MITSUBISHI | CS2669R | N/A | DARK OR NO PICTURE | CHECK/REPLACE R657 | |
MITSUBISHI | CS2669R | N/A | NO AUDIO, LEFT OR RIGHT | CHECK/REPLACE C3X2 AND C3Y4 FOR SHORTS (470uF @ 16v) | |
MITSUBISHI | CS2669R | N/A | DEAD SET | CHECK/REPLACE ZD1 (P/N# 264P332050) AND C2 (100uF @ 16v) | |
MITSUBISHI | CS2669R | N/A | INTERMITTENT LOSS OF RASTER DUE TO FAILURE OF H.V. SUPPLY | CHECK/REPLACE R908 FOR BREAKING DOWN | |
MITSUBISHI | CS2670 | N/A | NO VIDEO AND HAS A FAINT VERTICAL LINE IN THE RASTER | CHECK/REPLACE L553 (P/N# 333P012090) | |
MITSUBISHI | CS2670 | N/A | HERRINGBONE PATTERN IN THE PIP MODE | REMOVE THE GLUE AROUND THE 390 OHM RESISTOR BETWEEN PIN 13 & 8 OF IC7164 (IT MAY HAVE BECOME CONDUCTIVE) | |
MITSUBISHI | CS2671 | N/A | PICTURE PULSATES AT HIGH BRIGHTNESS | CHECK IC201 | |
MITSUBISHI | CS2671 | N/A | MAGENTA INSERT PIX IN ALL PIP MODES | CHECK L7000 OPEN | |
MITSUBISHI | CS2671 | N/A | NO VIDEO AND NO AUDIO | CHECK R915 AND D907 | |
MITSUBISHI | CS2671 | N/A | NO VIDEO | CHECK IC7000 | |
MITSUBISHI | CS2671 | N/A | AUDIO IS MUTED | CHECK/REPLACE Q3E1 AND D3X6 FOR LEAKAGE. | |
MITSUBISHI | CS2671 | N/A | O.S.D IS BLACK--NO RED OR GREEN | CHECK D7A6 FOR LEAKAGE | |
MITSUBISHI | CS2671 | N/A | NO PIX/NO SOUND -- HV PRESENT | CHECK L555 | |
MITSUBISHI | CS2671 | N/A | NO AUDIO OUT. TO SPKRS--LINE OUTPUTS ARE OK | CHECK IC302 AND R927 | |
MITSUBISHI | CS2671 | N/A | WHITE RASTER-NO VIDEO | R7102 OPEN & Q7191 SHORTED BARE SECTION OF YELLOW | |
MITSUBISHI | CS2671R | N/A | STEREO AND SAP WILL NOT SWITCH | CHECK/REPLACE C3B2 | |
MITSUBISHI | CS2671R | N/A | NO VIDEO | CHECK/REPLACE D907 (P/N# 264P521030) | |
MITSUBISHI | CS2671R | N/A | NO VIDEO | CHECK/REPLACE DF7000 (P/N# 296P090020) | |
MITSUBISHI | CS26EX1 | N/A | SHUTS DOWN WITH MENU ACTIVATION | CHECK/REPLACE D210 (P/N# 264P045040) | |
MITSUBISHI | CS2710R | N/A | VERTICAL STRETCHED AT THE TOP | CHECK/REPLACE R521 AND R558 | |
MITSUBISHI | CS2710R | N/A | NO VERTICAL SWEEP | CHECK/REPLACE R456 FOR OPEN | |
MITSUBISHI | CS2710R | N/A | NO AUDIO BUT OSD VOLUME BAR WORKS NORMAL | CHECK/REPLACE R719 (P/N# 103P543090) | |
MITSUBISHI | CS2715R | N/A | INTERMITTENT VERTICAL SYNC | CHECK/REPLACE C2B5 (47uF @ 35v) | |
MITSUBISHI | CS2715R | N/A | INTERMITTENT BOWING ON THE SIDES OF PICTURES | CHECK/REPLACE VR505 (P/N# 127C070090) | |
MITSUBISHI | CS2715R | N/A | EXCESSIVE VERTICAL SWEEP | CHECK/REPLACE C4E3 (1uF @ 35v) | |
MITSUBISHI | CS2720 | N/A | NO CONTROL OF BRIGHTNESS OR CONTRAST BUT THE OSD DISPLAY DOES MOVE. | CHECK/REPLACE D210 FOR SHORT OR LEAKAGE | |
MITSUBISHI | CS27200 | N/A | DISTORTED AUDIO ON SOME CHANNELS | CHECK/REPLACE SF101 (P/N# 296P096030) | |
MITSUBISHI | CS27200 | N/A | DARK PICTURE | CHECK/REPLACE D541 | |
MITSUBISHI | CS27200 | N/A | TUNER VIDEO HAS A HORZ. BEND | CHECK/REPLACE C116 (0.01uF @ 50v) | |
MITSUBISHI | CS27201 | N/A | BUZZ IN THE SOUND | ADD GROUND WIRE FROM TUNER GRD. TAB TO GRD. FOIL NEAR S-VHS JACK - ADD WIRE FROM GRD.NEAR BU(TUNER) TO PIN 10 0F IC3001 | |
MITSUBISHI | CS27201 | N/A | INTERMITTENT AUDIO BUZZ | CHECK/REPLACE C309 (47uF @ 50v) | |
MITSUBISHI | CS2720R | N/A | NO OR INTERMITTENT COLOR | CHECK/REPLACE Q501 AND D504 FOR SHORT OR LEAKY | |
MITSUBISHI | CS2720R | N/A | VERTICAL STRETCHED AT THE TOP | CHECK/REPLACE R521 AND R558 | |
MITSUBISHI | CS2720R | N/A | NO VERTICAL SWEEP | CHECK/REPLACE R456 FOR OPEN | |
MITSUBISHI | CS2720R | N/A | LOSS OF SYNC | CHECK/REPLACE DL202 IF VIDEO SIGNAL AT PIN 32 OF IC201 IS NOT 1v p-p | |
MITSUBISHI | CS2720R | N/A | RETRACE LINES AT TOP OF SCREEN | CHECK/REPLACE R521 (1.2 1/4w.) | |
MITSUBISHI | CS2720R | N/A | RETRACE LINES AT THE TOP OF THE PICTURE | CHECK/REPLACE R521 (1.2 1/4w.) | |
MITSUBISHI | CS2721 | N/A | SNOWY PICTURE | CHECK/REPLACE R773 (2.7k 1/4w.) | |
MITSUBISHI | CS2721 | N/A | INTERMITTENT O.S.D. | CHECK/REPLACE IC701,Q780 AND ADD A 180k RESISTOR TO EMIITER AND BASE OF Q780 | |
MITSUBISHI | CS2722 | N/A | NO VERTICAL SYNC. | CHECK/REPLACE DL202 | |
MITSUBISHI | CS2723R | N/A | NO VIDEO/LUMINANCE | CHECK/REPLACE Q2E5 (P/N# 260P560040) | |
MITSUBISHI | CS2723R | N/A | NO RED | CHECK/REPLACE Q6901 AND SPARK GAP (449C081020) | |
MITSUBISHI | CS2724 | N/A | EXCESSIVE VERTICAL HEIGHT AND UNABLE TO COMPRESS BELOW THE TOP OF THE CRT | CHECK/REPLACE C4E3 (MAY BE THERMAL) | |
MITSUBISHI | CS2724 | N/A | INTERMITTENT SHUTDOWN | CHECK/REPLACE R5H2 (18k 1/4w.) | |
MITSUBISHI | CS2724R | N/A | NO VIDEO | CHECK/REPLACE D403 (P/N# 264P045040) | |
MITSUBISHI | CS2724R | N/A | NO VERTICAL SWEEP AND MAY HAVE NO AUDIO | CHECK/REPLACE IC6E3 (P/N# 266P934040) | |
MITSUBISHI | CS2725 | N/A | RETRACE LINES IN THE PICTURE | CHECK/REPLACE Q6902 (P/N# 260P559030) | |
MITSUBISHI | CS2725R | N/A | NO EXTERNAL VIDEO | CHECK/REPLACE Q701 (P/N# 260P559030) | |
MITSUBISHI | CS2730 | N/A | REMOTE CHANNEL AND VOLUME BUTTONS ARE ERRATIC | CHECK/REPLACE Z700 FOR LEAKAGE OR NOISE | |
MITSUBISHI | CS27301 | N/A | BUZZ IN THE AUDIO | ADD A GROUND WIRE TO THE HEATSINK TAB OF IC401 AND THE OTHER END TO PIN 4 OF 'FP' CONNECTOR | |
MITSUBISHI | CS27301 | N/A | NO OSD OR AFT LOCK | CHECK/REPLACE IC704,D708 AND R752 (5.6k 1/4w) | |
MITSUBISHI | CS27301 | N/A | BLUE RASTER AND NO ON-SCREEN DISPLAY | CHECK/REPLACE D708 FOR LEAKY OR SHORTED (P/N# 264P045040) | |
MITSUBISHI | CS27301 | N/A | WILL NOT TURN ON | CHECK/REPLACE D708 (P/N# 264P045040) | |
MITSUBISHI | CS27303 | N/A | NO VIDEO | CHECK/REPLACE DL2032 (P/N# 337P189010) | |
MITSUBISHI | CS27303 | N/A | WILL NOT POWER UP | CHECK/REPLACE D7A2 (5v ZENER) (P/N# 264P502020) | |
MITSUBISHI | CS27303 | N/A | INTERMITTENT PICTURE | CHECK/REPLACE C2011 | |
MITSUBISHI | CS27401 | N/A | INTERMITTENT SHUT DOWN | CHECK/REPLACE C729 (1000uF @ 50) | |
MITSUBISHI | CS27401 | N/A | NO HORZ. SWEEP - ONLY A VERTICAL LINE | CHECK/REPLACE T5A1 (P/N# 349P145050) | |
MITSUBISHI | CS27401 | N/A | NO COLOR | CHECK/REPLACE IC2003 (P/N# 272P184010) | |
MITSUBISHI | CS27405 | N/A | DEAD SET - NO POWER | CHECK/REPLACE C9B3 (3300uF @ 35v) | |
MITSUBISHI | CS27701 | N/A | NO CHANNELS - SNOWY RASTER ONLY | CHECK/REPLACE IC1V1 (P/N# 272P872010) | |
MITSUBISHI | CS2771 | N/A | EXCESSIVE VERTICAL HEIGHT AND UNABLE TO COMPRESS BELOW THE TOP OF THE CRT | CHECK/REPLACE C4E3 (MAY BE THERMAL) | |
MITSUBISHI | CS2771R | N/A | DARK TO NO VIDEO/LUMINANCE - MAY BE INTERMITTENT PROBLEM | CHECK/REPLACE C623 (470uF @ 10v) | |
MITSUBISHI | CS27EX1 | N/A | POOR PINCUSHION - SIDES BOWED IN | CHECK/REPLACE Q5A4 (P/N# 260P428020) | |
MITSUBISHI | CS27EX1 | N/A | VERTICAL ROLL WHEN USING TUNER INPUT | CHECK/REPLACE C108 (0.1uF @ 50v) | |
MITSUBISHI | CS27EX1 | N/A | WILL NOT TURN ON | CHECK/REPLACE IC3A0 (P/N# 266P934020) | |
MITSUBISHI | CS27EX1 | N/A | NO POWER | CHECK/REPLACE IC702 (P/N# 266P934070) | |
MITSUBISHI | CS27EX1 | N/A | WILL NOT TURN ON | CHECK/REPLACE D702 (P/N# 264P045040) | |
MITSUBISHI | CS27EX1 | N/A | NO VIDEO | CHECK/REPLACE R585 (1.2 1w) | |
MITSUBISHI | CS27MX1 | N/A | NO VIDEO (MAIN PIX) - PIP PIX IS OK | CHECK/REPLACE C7001 (4.7uF @ 35v) | |
MITSUBISHI | CS27MX1 | N/A | SMALL PICTURE WITH WAVY EDGES | CHECK/REPLACE C953 (820uF @ 180v) | |
MITSUBISHI | CS27MX1 | N/A | SMALL PICTURE WITH HUM BARS | CHECK/REPLACE C953 (820 F @ 180v) | |
MITSUBISHI | CS3104 | N/A | HORIZONTAL OUTPUT FAILURE | CHECK/REPLACE HORZ. OUTPUT TRANSISTOR AND ADD A 33 ohm 1/4 WATT RESISTOR BETWEEN BASE AND EMITTER | |
MITSUBISHI | CS3114 | N/A | HORIZONTAL OUTPUT FAILURE | CHECK/REPLACE HORZ. OUTPUT TRANSISTOR AND ADD A 33 ohm 1/4 WATT RESISTOR BETWEEN BASE AND EMITTER | |
MITSUBISHI | CS3115 | N/A | INTERMITTENT RELAY CHATTER | CHECK/REPLACE C5H9 (47uF @ 50v) | |
MITSUBISHI | CS3115 | N/A | INTERMITTENT ARCING OF CRT TO GROUND | CHECK GROUND CONNECTIONS ON CRT ON BOTH ENDS FOR PROPER CONNECTION. | |
MITSUBISHI | CS3115R | N/A | HORZ. JITTER | CHECK/REPLACE D509 (12v ZENER) (P/N# 264P487090) | |
MITSUBISHI | CS3120 | N/A | BLACK LINES IN THE VIDEO - PICTURE MAY ALSO HAVE A RED CAST TO IT | CHECK/RESOLDER CONNECTIONS ON R6F6 AND Q616 AND PIN 4 OF 'DV' CONNECTOR | |
MITSUBISHI | CS31203 | N/A | MENU CHARACTERS MISSING | CHECK/REPLACE IC700 (P/N# 274P557010) | |
MITSUBISHI | CS31205 | N/A | NO POWER | CHECK/REPLACE C9B3 (3300uF @ 35v) | |
MITSUBISHI | CS3120R | N/A | 130 VOLT SUPPLY TOO HIGH | CHECK/REPLACE C914 (470uF @ 50v) | |
MITSUBISHI | CS3120R | N/A | SET SHUTS DOWN ON POWER UP | CHECK/REPLACE C916 (10uF @ 100v) | |
MITSUBISHI | CS3120R | N/A | BLACK AND WHITE LINES IN THE PICTURE WHEN USING TUNER INPUT | CHECK/REPLACE IC101 (P/N# 272P026010) | |
MITSUBISHI | CS3120R | N/A | NOISY PICTURE ONLY WHEN COLOR IS PRESENT | CHECK/ALIGN COMB FILTER BIAS ADJUSTMENT (VR6A10) | |
MITSUBISHI | CS3120R | N/A | NO VIDEO | CHECK/REPLACE IC601 (P/N# 263P299010) | |
MITSUBISHI | CS3121 | N/A | HORIZONTAL OUTPUT FAILURE | CHECK/REPLACE HORZ. OUTPUT TRANSISTOR AND ADD A 33 ohm 1/4 WATT RESISTOR BETWEEN BASE AND EMITTER | |
MITSUBISHI | CS3121R | VA | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
MITSUBISHI | CS31301 | N/A | MAIN PICTURE GOES BLACK WHEN PIP IS ACTIVATED | CHECK/REPLACE Q710 (P/N# 260P582010) | |
MITSUBISHI | CS31301 | N/A | NO VERTICAL SWEEP | CHECK/REPLACE L511 FOR OPEN (P/N# 325C108070) | |
MITSUBISHI | CS31305 | N/A | INTERMITTENT SHUTDOWN | CHECK/REPLACE R964 (68?@ 2 watt) | |
MITSUBISHI | CS3131 | N/A | HORIZONTAL OUTPUT FAILURE | CHECK/REPLACE HORZ. OUTPUT TRANSISTOR AND ADD A 33 ohm 1/4 WATT RESISTOR BETWEEN BASE AND EMITTER | |
MITSUBISHI | CS3131R | N/A | 130 VOLT B+ WILL NOT REGULATE | CHECK/REPLACE C914 (470uF @ 50v) | |
MITSUBISHI | CS3131R | N/A | INTERMITTENT COLOR IN PIP PICTURE | CHECK/REPLACE C7205 (10uF @ 50) | |
MITSUBISHI | CS3131R | VA | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
MITSUBISHI | CS3135 | N/A | INTERMITTENT ARCING OF CRT TO GROUND | CHECK GROUND CONNECTIONS ON CRT ON BOTH ENDS FOR PROPER CONNECTION. | |
MITSUBISHI | CS3136 | N/A | INTERMITTENT ARCING OF CRT TO GROUND | CHECK GROUND CONNECTIONS ON CRT ON BOTH ENDS FOR PROPER CONNECTION. | |
MITSUBISHI | CS31FX1 | N/A | AFT SEARCHES WHEN CHANNELS ARE CHANGED AND THEN LOCKS IN AFTER A FEW SECONDS | CHECK/REPLACE IC701 (P/N# 263P557020) | |
MITSUBISHI | CS31FX1 | N/A | DEAD SET - R901 ON S-POWER PCB OPEN | CHECK/REPLACE R901 (2.2?@ 5w), C7H8 (0.01uF @ 25v), OR K9X1 RELAY (P/N# 287P049030) | |
MITSUBISHI | CS31MX1 | N/A | VERTICAL COLLAPSE | CHECK/REPLACE C450 (220uF @ 25v) | |
MITSUBISHI | CS31MX1 | N/A | WON'T TUNE SOME CHANNELS | CHECK/REPLACE C7A1 (33uF @ 50v) | |
MITSUBISHI | CS31MX1 | N/A | NO VERTICAL DEFLECTION | CHECK/REPLACE IC6E2 9 VOLT REGULATOR | |
MITSUBISHI | CS31MX1 | N/A | NO TUNER OPERATION | CHECK/REPLACE R585 (1.2 1/4w) | |
MITSUBISHI | CS31MX1 | N/A | NO MAIN PICTURE WHEN PIP IS ACTIVATED | CHECK/REPLACE D731 (P/N# 264P045040) | |
MITSUBISHI | CS32307 | N/A | DEAD - NO POWER | CHECK/REPLACE C930 (4700uF @ 35v) | |
MITSUBISHI | CS3502R | N/A | PICTURE WAVERING | CHECK/REPLACE T902 (P/N# 350P347010) | |
MITSUBISHI | CS3503 | N/A | FALSE STEREO INDICATOR ON SOME CABLE SYSTEMS | REMOVE OR CUT R3B5 LOCATED TO THE RIGHT OF IC3A1 | |
MITSUBISHI | CS3503R | N/A | IC901 AND IC902 SHORTED | CHECK/REPLACE R911 (22 ohm 1/4w),IC901 AND IC902 | |
MITSUBISHI | CS3504R | N/A | OSD IS INTERMITTENT OR MISSING | CHECK/REPLACE L711 FOR OPEN (P/N 411P013010) | |
MITSUBISHI | CS3504R | N/A | VERTICAL ROLLS WHEN USING A VCR INPUT SIGNAL | CHECK/REPLACE C413 (100uF @ 35v) | |
MITSUBISHI | CS3504R | N/A | INTERMITTENT COLOR | CHECK/REPLACE C7224 (0.047uF @ 50v NP) | |
MITSUBISHI | CS3505R | N/A | IC4E1 FAILURE | CHECK/REPLACE IC4E1,C4E4 AND C4E5 | |
MITSUBISHI | CS3505R | N/A | NO AUDIO OR VIDEO -- OSD IS FINE | CHECK/REPLACE IC8A2 (P/N# 266P934040) | |
MITSUBISHI | CS3505R | N/A | NO VIDEO OR LUMINANCE INFORMATION | CHECK/REPLACE C232 (10uF @ 50v) | |
MITSUBISHI | CS3505R | N/A | WHITE TRAILING FROM LETTERS | CHECK/REPLACE C232 (10uF @ 50v) | |
MITSUBISHI | CS3505R | N/A | DEAD - HIGH PITCHED SQUEAL - POSSIBLE SHORT HORZ. OUTPUT | CHECK/REPLACE D537 (P/N# 264P102020), D538 (P/N 264P157040) AND Q532 (P/N# 260P608010), Q501 (P/N# ECG375) | |
MITSUBISHI | CS3506 | N/A | INTERMITTENT VERTICAL JITTER | CHECK/REPLACE C404 | |
MITSUBISHI | CS3506 | N/A | HORIZONTAL OUTPUT FAILURE | CHECK/REPLACE HORZ. OUTPUT TRANSISTOR AND ADD A 33 ohm 1/4 WATT RESISTOR BETWEEN BASE AND EMITTER | |
MITSUBISHI | CS3506 | N/A | WON'T TURN ON | CHECK/REPLACE IC901 AND C914 (470uF @ 50v) | |
MITSUBISHI | CS3506R | N/A | LINES AT BOTTOM OF THE SCREEN | CHECK/REPLACE C4E7 (CHECK FOR CHANGE IN VALUE) | |
MITSUBISHI | CS3506R | N/A | NO VIDEO | CHECK/REPLACE R7400 (15?2w) | |
MITSUBISHI | CS3506R | N/A | NO DETAIL IN DARK SCENES | CHECK/REPLACE C232 (10uF @ 50v) | |
MITSUBISHI | CS3506R | N/A | SET SHUTS DOWN WHEN TURNED ON | CHECK/REPLACE R5H2 FOR OPEN | |
MITSUBISHI | CS3506R | N/A | NO SOUND BUT SAP SIGNAL IS AUDIBLE | CHECK/REPLACE C370 (0.47uF @ 50v) | |
MITSUBISHI | CS3506R | N/A | MAIN PIX GOES TO BLANK RASTER WHEN PIP MODE IS SELECTED | CHECK/REPLACE Q7206 FOR SHORT | |
MITSUBISHI | CS3506R | N/A | HIGH PITCHED NOISE IN THE AUDIO | CHECK/REPLACE C716 OR COLD SOLDER JOINTS | |
MITSUBISHI | CS3506R | N/A | SET HAS VERTICAL FOLDOVER OR VERTICAL JITTER WITH BLACK BAR THROUGH CENTER | CHECK/REPLACE C4E5 (100uF @ 35v) | |
MITSUBISHI | CS3506R | N/A | HIGH PITCHED TONE THRU SPEAKERS - TONE CONTROL WILL VARY IT | CHECK/REPLACE C716 FOR OPEN | |
MITSUBISHI | CS3513R | N/A | NO SOUND | CHECK/REPLACE R7B0 (22k @ 1/4w) | |
MITSUBISHI | CS3514R | N/A | NO COLOR IN THE MAIN AND THE PIP PICTURES | CHECK/REPLACE C7103,VC7100,VC7101 AND LPF7101 | |
MITSUBISHI | CS3515 | N/A | NO POWER - RELAY ENGAGES BUT SET DOESN'T TURN ON | CHECK/REPLACE L909 FOR OPEN (P/N# 411P012010 | |
MITSUBISHI | CS3515 | N/A | INTERMITTENT ARCING OF CRT TO GROUND | CHECK GROUND CONNECTIONS ON CRT ON BOTH ENDS FOR PROPER CONNECTION. | |
MITSUBISHI | CS3520 | N/A | INTERMITTENT VIDEO - AUDIO IS OK | CHECK/REPLACE IC6E1 (P/N# 266P931010) | |
MITSUBISHI | CS35201 | N/A | TV SHUTS DOWN WHEN POWERED UP | CHECK/REPLACE C9140 (470uF @ 509v) AND C9160 (1OuF @ 100v) | |
MITSUBISHI | CS35201A | N/A | NO CHANNEL LOCK DURING AUTO SCAN | CHECK/REPLACE Q703 (P/N# 260P560040) AND C713 (4.7uF @ 50v) | |
MITSUBISHI | CS35201A | N/A | NO HORZ. DRIVE FROM IC201 PIN #13 | CHECK/REPLACE C6F3 (47uF @ 25v) | |
MITSUBISHI | CS3520R | N/A | WHITE BAND AT THE TOP OF PICTURE | CHECK/REPLACE D4E1 (P/N# 264P463090) | |
MITSUBISHI | CS3521 | N/A | HORIZONTAL OUTPUT FAILURE | CHECK/REPLACE HORZ. OUTPUT TRANSISTOR AND ADD A 33 ohm 1/4 WATT RESISTOR BETWEEN BASE AND EMITTER | |
MITSUBISHI | CS3521R | N/A | BRIGHTNESS GOES TO MAXIMUM AND IS UNCONTROLLABLE | CHECK/REPLACE C225 FOR LEAKAGE | |
MITSUBISHI | CS3521R | N/A | NOISY VIDEO AND NO COLOR | CHECK/REPAIR SHORT AT PIN 5 OF IC204 TO SHIELD | |
MITSUBISHI | CS3521R | N/A | REDUCED WIDTH AND SIDE PINCUSHION PROBLEMS | CHECK/REPLACE C546 (.027uF @ 400v) | |
MITSUBISHI | CS3521R | VA | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
MITSUBISHI | CS3525R | N/A | SHUTS DOWN WHEN UNIT IS POWERED UP | CHECK/REPLACE C940 (100uF @ 16v) | |
MITSUBISHI | CS3525R | N/A | DEAD SET | CHECK/REPLACE R9C2 FOR OPEN AND D9A1 | |
MITSUBISHI | CS3525R | N/A | TV SHUTS DOWN WHEN POWER IS TURNED ON | CHECK/REPLACE C940 (100uF @ 16v) | |
MITSUBISHI | CS3526R | N/A | DEAD SET - NO POWER | CHECK/REPLACE D7X1 (3 VOLT ZENER P/N# 264P501050) | |
MITSUBISHI | CS35301 | N/A | NEGATIVE PICTURE | CHECK/REPLACE DL202 (P/N# 337P113020) | |
MITSUBISHI | CS35301 | N/A | NO VIDEO AND MAY GO INTO SHUTDOWN | CHECK/REPLACE C511 (0.15uF @ 50v) | |
MITSUBISHI | CS35303 | N/A | SET SHUTS DOWN WHEN POWERED UP | CHECK/REPLACE C9110 (4.7uF @ 50v) | |
MITSUBISHI | CS35303 | N/A | INTERMITTENT SHUTDOWN | CHECK/REPLACE IC502 (P/N# 266P922010) | |
MITSUBISHI | CS35303 | N/A | INTERMITTENT OPERATION | CHECK/REPLACE X7A0 (P/N# 285P039020) | |
MITSUBISHI | CS3530R | N/A | NO VIDEO OR LUMINANCE INFORMATION | CHECK/REPLACE C232 (10uF @ 50v) | |
MITSUBISHI | CS3530R | N/A | WHITE TRAILING FROM LETTERS | CHECK/REPLACE C232 (10uF @ 50v) | |
MITSUBISHI | CS3530R | N/A | RETRACE LINES AT THE TOP OF PICTURE | CHECK/REPLACE C4F1 (10pF @ 50v) | |
MITSUBISHI | CS3531 | N/A | NOISE IN ALL VIDEO INPUTS | CHECK/REPLACE C927 (47uF @ 50v) | |
MITSUBISHI | CS3531R | N/A | WHITE STREAKS IN THE PICTURE OR INTERMITTENT VIDEO | CHECK/REPLACE C7004 (4.7uF @ 50v) | |
MITSUBISHI | CS3531R | VA | NO PICTURE AND SET DISPLAYS 'TUNER OUT' | CHECK TO SEE IF MONITOR MODE HAS BEEN SELECTED ON THE ON-SCREEN MENU. | |
MITSUBISHI | CS3535 | N/A | TOP OF PICTURE IS STRETCHED VERTICALLY | CHECK/REPLACE C4E3 WITH A 1uF @ 35v TANTALUM | |
MITSUBISHI | CS3535 | N/A | INTERMITTENT ARCING OF CRT TO GROUND | CHECK GROUND CONNECTIONS ON CRT ON BOTH ENDS FOR PROPER CONNECTION. | |
MITSUBISHI | CS3535 | N/A | INTERMITTENT COLOR | CHECK/REPLACE R646 (390 ohm) | |
MITSUBISHI | CS3535R | N/A | WILL NOT SWITCH FROM ANTENNA TO EXTERNAL INPUTS | CHECK/REPLACE IC2005 | |
MITSUBISHI | CS3536 | N/A | INTERMITTENT ARCING OF CRT TO GROUND | CHECK GROUND CONNECTIONS ON CRT ON BOTH ENDS FOR PROPER CONNECTION. | |
MITSUBISHI | CS3540 | N/A | DEAD OR INTERMITTENT POWER | CHECK/REPLACE D901 | |
MITSUBISHI | CS35403 | N/A | CENTER LINES ARE STRETCHED | CHECK/REPLACE C452 AND C471 | |
MITSUBISHI | CS35403 | N/A | DEAD SET - NO SOUND OR PICTURE BUT DOES TURN ON | CHECK/RESOLDER CONNECTIONS ON IC502 | |
MITSUBISHI | CS35405 | N/A | INTERMITTENT MICROPROCESSOR LOCK-UP -- LOSS OF TIME -- INTERMITTENT SHUTDOWN - VARIOUS SERVICE SETTINGS ARE RESET | ADD 0.01uF @ 50v CERAMIC DISC CAPACITOR FROM PIN #36 OF IC700 TO GROUND -- SOME EEPROM SETTINGS MAY NEED TO BE SET | |
MITSUBISHI | CS35405 | N/A | DEAD SET - NO RELAY CLICK | CHECK/REPLACE R7600 AND R7601 | |
MITSUBISHI | CS35405 | N/A | NARROW WIDTH | CHECK/REPLACE IC201 (P/N# 270P190010) | |
MITSUBISHI | CS35503 | N/A | INTERMITTENT POWER UP | CHECK/REPLACE Q901 & Q916 FOR SHORT/LEAKY (P/N# 260P422010) | |
MITSUBISHI | CS35503 | N/A | IC401 FAILS REPEATEDLY | CHECK/REPLACE IC401 AND C471 (0.01uF @ 50V) | |
MITSUBISHI | CS35503 | N/A | INTERMITTENT POWER UP | CHECK/REPLACE Q901 AND Q916 (P/N# 260P422010) | |
MITSUBISHI | CS35503 | N/A | INTERMITTENT LOSS OF VIDEO | CHECK/RESOLDER CONNECTIONS ON EACH END OF THE 'HD' CONNECTOR | |
MITSUBISHI | CS35503 | N/A | REPEATED FAILURE OF Q532 | CHECK/REPLACE R533 (15k), C532 (680pF @ 500v) AND C539 (1uF @ 200v) | |
MITSUBISHI | CS35503 | N/A | DEAD - NO POWER | CHECK/REPLACE R9060 (2.2 @ 20w - P/N# 109D132050) | |
MITSUBISHI | CS35503 | N/A | DEAD - NO POWER | CHECK/REPLACE C736 (0.01uF @ 50v X4) CAPACITOR NETWORK | |
MITSUBISHI | CS35601 | N/A | FLAG WAVING AT THE TOP OF PICTURE | CHECK/REPLACE C5A1 (3.3uF @ 50v NP) | |
MITSUBISHI | CS35601 | N/A | VERTICAL JITTER WHEN PLAYING PRE-RECORDED TAPES | CHECK/REPLACE C231 (1uF @ 50v) | |
MITSUBISHI | CS35601 | N/A | DEAD SET | CHECK/REPLACE R995 (330k @ 1/2w) | |
MITSUBISHI | CS35701 | N/A | INTERMITTENT POWER OR DEAD | CHECK/REPLACE D707 (P/N# 264P045040) | |
MITSUBISHI | CS35702 | N/A | SET CYCLES ON/OFF | CHECK/REPLACE IC302 (P/N# 272P459020) | |
MITSUBISHI | CS35803 | N/A | DARK OR NO VIDEO | CHECK/REPLACE Q291 FOR LEAKAGE | |
MITSUBISHI | CS35803 | N/A | WILL NOT POWER UP | CHECK/REPLACE D2SV2 (P/N# 264P502030) | |
MITSUBISHI | CS35803 | N/A | LOW LEVEL AUDIO HUM AND DOES NOT INCREASE WITH VOLUME | ADD A FERRITE BEAD TO LEAD 'LR' (P/N# KIT-BEAD) | |
MITSUBISHI | CS35803 | N/A | GREEN FLASHES IN THE PICTURE | CHECK/REPLACE C6A39 (0.1uF @ 50v) | |
MITSUBISHI | CS35FX1 | N/A | DEAD SET - R901 ON S-POWER PCB OPEN | CHECK/REPLACE R901 (2.2?@ 5w), C7H8 (0.01uF @ 25v), OR K9X1 RELAY (P/N# 287P049030) | |
MITSUBISHI | CS35FX1 | N/A | AFT SEARCHES WHEN CHANNELS ARE CHANGED AND THEN LOCKS IN AFTER A FEW SECONDS | CHECK/REPLACE IC701 (P/N# 263P557020) | |
MITSUBISHI | CS35FX2 | N/A | DEAD SET - R901 ON S-POWER PCB OPEN | CHECK/REPLACE R901 (2.2?@ 5w), C7H8 (0.01uF @ 25v), OR K9X1 RELAY (P/N# 287P049030) | |
MITSUBISHI | CS35FX2 | N/A | AFT SEARCHES WHEN CHANNELS ARE CHANGED AND THEN LOCKS IN AFTER A FEW SECONDS | CHECK/REPLACE IC701 (P/N# 263P557020) | |
MITSUBISHI | CS35MX1 | N/A | LOW BRIGHTNESS | CHECK/REPLACE R270 (120k) FOR OPEN | |
MITSUBISHI | CS35X7 | N/A | INTERMITTENT ARCING OF CRT TO GROUND | CHECK GROUND CONNECTIONS ON CRT ON BOTH ENDS FOR PROPER CONNECTION. | |
MITSUBISHI | CS40503 | N/A | INTERNAL/EXTERNAL SPEAKER SWITCH DOESN'T WORK | CHECK/REPLACE Q302 (P/N# 260P559030) | |
MITSUBISHI | CS40503 | N/A | IC401 FAILS REPEATEDLY | CHECK/REPLACE IC401 AND C471 (0.01uF @ 50V) | |
MITSUBISHI | CS40503 | N/A | BLACK LINE AT THE TOP OF THE PICTURE | CHECK/REPLACE IC401 (P/N# 270P064010) | |
MITSUBISHI | CS40601 | N/A | PICTURE BOWED ON THE SIDES | CHECK/REPLACE Q503 (P/N# 260P428020) | |
MITSUBISHI | CS40805 | N/A | INTERMITTENT POWER UP | CHECK/REPLACE D919 (P/N# 264P102020) - MAY CHECK OK | |
MITSUBISHI | CS40FX1 | N/A | DARK PICTURE AND NARROW WIDTH | CHECK/REPLACE R552 (220?@ 3watt) | |
MITSUBISHI | TS4553 | N/A | PINCUSHION IS DISTORTED AT THE TOP | CHECK/REPLACE R4B07 (47k @ 1/4w) | |
MITSUBISHI | TS4553 | N/A | PICTURE IS BOWED IN PN THE SIDES | CHECK/REPLACE D501 (P/N# 264P358070) | |
MITSUBISHI | TS4553 | N/A | NO VIDEO | CHECK/REPLACE R509 AND R519 (100 ) (P/N# 103P391030) | |
MITSUBISHI | TS5053 | N/A | NO VERTICAL SWEEP | CHECK/REPLACE L542 FOR OPEN | |
MITSUBISHI | VS360 | N/A | TOP HALF OF PICTURE STRETCHED VERTICALLY | VERT. OUTPUT BIASING DIODES,D401 AND D401 WERE LEAKY | |
MITSUBISHI | VS360 | N/A | INSUFF. HEIGHT WHEN COLD VERT. JITTER WHEN HOT | LEAKY TANTALUM CAPACITTOR,C405,AT PIN 11 OF IC201 | |
MITSUBISHI | VS363 | N/A | CONTINUOUSLY SCANS CHANNELS IN AUTO TUNING MODE | CHECK C105 FOR LEAKAGE | |
MITSUBISHI | VS4003 | N/A | INTERMITTENT PARENTAL LOCK ACTIVATIION | CHECK/REPLACE C720 (0.22uF @ 50v) | |
MITSUBISHI | VS403 | N/A | COLOR BARS IN PIX --BARBER POLING | CHECK COMB FILTER ALIGNMENT AND ALSO L202,L203 FOR | |
MITSUBISHI | VS410 | N/A | UN-CONTROLLABLE EXCESSIVE BRIGHTNESS | CHECK D580 FOR LEAKAGE | |
MITSUBISHI | VS410 | N/A | POOR FOCUS/CONVERGENCE--CUST.CONVERG. NO EFFECT | CHECK R931 | |
MITSUBISHI | VS412 | N/A | INTERMITTENT SHUTDOWN--POOR FOCUS | IF HV IS NORMAL,CHECK VOLTAGE AT THE BASE OF Q406-- | |
MITSUBISHI | VS414 | N/A | BLUE FOCUS ADJUSTMENT INOPERATIVE | CHECK R8000 FOR INCREASE IN VALUE | |
MITSUBISHI | VS414 | N/A | POOR RECEPTION--SOME COLOR IN PIX BUT NO VIDEO | RESOLDER ALL GROUND CONNECTIONS FOR THE SHIELD ON | |
MITSUBISHI | VS414 | N/A | DEAD SET - BOTH LOCALLY AND REMOTELY | CHECK VOLTAGE AT PIN 25 OF IC702 (SIGNAL BD)-IF IT IS UNDER 4 VDC,REPLACE RP7700 (REMOTE PREAMP) | |
MITSUBISHI | VS414 | N/A | SEVERE CONVERGENCE SHIFT--NEEDS CONSTANT ADJUST. | CHECK IC8A0 | |
MITSUBISHI | VS414 | N/A | FAILURE OF THE CONVERGENCE IC's (IC8A0 & IC8A1) | REPLACE IC8A0/IC8A1 AND CHECK CONNECTIONS AT THE | |
MITSUBISHI | VS4501 | N/A | UNABLE TO GET RID OF RED HORZ. LINE TO CONVERGE | CHECK R716 FOR INCREASED IN VALUE | |
MITSUBISHI | VS4501 | N/A | CONSTANT BLUE RASTER | CHECK C728 FOR LEAKAGE | |
MITSUBISHI | VS4552 | N/A | BURNED SPOTS IN THE CENTER OF THE SCREEN | CHECK/REPLACE R9A45 (180 1/2w) (P/N# 103P391060) | |
MITSUBISHI | VS459 | N/A | RIPPLE TRAVELING THRU RED CROSS HATCH | CHECK Q8B6 | |
MITSUBISHI | VS460 | N/A | NO AFT (L103 HAS NO EFFECT) | CHECK C726 FOR OPEN | |
MITSUBISHI | VS461 | N/A | NO AFT (L103 HAS NO EFFECT) | CHECK C726 FOR OPEN | |
MITSUBISHI | VS464 | N/A | NO VIDEO ON SCREEN FROM ANY INPUT (TV OR EXT.) | CHECK FOR PRESENCE OF +5V AT IC711,PIN 3. IF MISSING | |
MITSUBISHI | VS464 | N/A | FAINT VERT. WHITE LINE AT RIGHT SIDE OF SCREEN | VF203, SHAPE PEAKING CONTROL WAS MISADJUSTED | |
MITSUBISHI | VS464 | N/A | BLACK DOTS IN PIX--CLEANING LENSES DOESN'T HELP | CHECK FOR DUST TRAPPED BETWEEN LENTICULAR AND | |
MITSUBISHI | VS466 | N/A | BLUE FOCUS ADJUSTMENT INOPERATIVE | CHECK R8000 FOR INCREASE IN VALUE | |
MITSUBISHI | VS466 | N/A | SEVERE CONVERGENCE SHIFT--NEEDS CONSTANT ADJUST. | CHECK IC800 | |
MITSUBISHI | VS466 | N/A | FAILURE OF THE CONVERGENCE IC's (IC8A0 & IC8A1) | REPLACE IC8A0/IC8A1 AND CHECK CONNECTIONS AT THE | |
MITSUBISHI | VS466 | N/A | POOR RECEPTION--SOME COLOR IN PIX BUT NO VIDEO | RESOLDER ALL GROUND CONNECTIONS FOR THE SHIELD ON | |
MITSUBISHI | VS467 | N/A | POOR RECEPTION--SOME COLOR IN PIX BUT NO VIDEO | RESOLDER ALL GROUND CONNECTIONS FOR THE SHIELD ON | |
MITSUBISHI | VS467 | N/A | SEVERE CONVERGENCE SHIFT--NEEDS CONSTANT ADJUST. | CHECK IC800 | |
MITSUBISHI | VS467 | N/A | BLUE FOCUS ADJUSTMENT INOPERATIVE | CHECK R8000 FOR INCREASE IN VALUE | |
MITSUBISHI | VS467 | N/A | FAILURE OF THE CONVERGENCE IC's (IC8A0 & IC8A1) | REPLACE IC8A0/IC8A1 AND CHECK CONNECTIONS AT THE | |
MITSUBISHI | VS468 | N/A | BLUE FOCUS ADJUSTMENT INOPERATIVE | CHECK R8000 FOR INCREASE IN VALUE | |
MITSUBISHI | VS468 | N/A | POOR RECEPTION--SOME COLOR IN PIX BUT NO VIDEO | RESOLDER ALL GROUND CONNECTIONS FOR THE SHIELD ON | |
MITSUBISHI | VS468 | N/A | FAILURE OF THE CONVERGENCE IC's (IC8A0 & IC8A1) | REPLACE IC8A0/IC8A1 AND CHECK CONNECTIONS AT THE | |
MITSUBISHI | VS468 | N/A | SEVERE CONVERGENCE SHIFT--NEEDS CONSTANT ADJUST. | CHECK IC800 | |
MITSUBISHI | VS5001R | N/A | NO 130V SUPPLY | CHECK/REPLACE R918 (1k 1/4w) FOR OPEN | |
MITSUBISHI | VS5001R | N/A | SUPPLY VOLTAGES TO IC901 ARE MISSING | CHECK/REPLACE L911 (P/N 411P001040) FOR OPEN | |
MITSUBISHI | VS5002 | N/A | NO VIDEO | CHECK FOR SHORTED IC7001 | |
MITSUBISHI | VS5051 | N/A | NO VIDEO | CHECK/REPLACE D726 (P/N# 264P485060) | |
MITSUBISHI | VS581 | N/A | SINGLE HUM BAR IN PIX--(LOW LINE VOLTAGE AREA) | CHECK D951 FOR LEAKAGE | |
MITSUBISHI | VS582 | N/A | FAILURE OF THE CONVERGENCE IC's (IC8A0 & IC8A1) | REPLACE IC8A0/IC8A1 AND CHECK CONNECTIONS AT THE | |
MITSUBISHI | VS582 | N/A | SEVERE CONVERGENCE SHIFT--NEEDS CONSTANT ADJUST. | CHECK IC800 | |
MITSUBISHI | VS582 | N/A | POOR RECEPTION--SOME COLOR IN PIX BUT NO VIDEO | RESOLDER ALL GROUND CONNECTIONS FOR THE SHIELD ON | |
MITSUBISHI | VS582 | N/A | BLUE FOCUS ADJUSTMENT INOPERATIVE | CHECK R8000 FOR INCREASE IN VALUE | |
MITSUBISHI | VS583 | N/A | HIGH PITCHED SQUEAL FROM T902 | CHECK R913 (NOT ON SCHEMATIC--ON BOTTOM OF POWER PCB) | |
MITSUBISHI | VS585 | N/A | FAILURE OF THE CONVERGENCE IC's (IC8A0 & IC8A1) | REPLACE IC8A0/IC8A1 AND CHECK CONNECTIONS AT THE | |
MITSUBISHI | VS585 | N/A | POOR RECEPTION--SOME COLOR IN PIX BUT NO VIDEO | RESOLDER ALL GROUND CONNECTIONS FOR THE SHIELD ON | |
MITSUBISHI | VS585 | N/A | DIM WASHED OUT PIX--SOME FLAGGING NOTICEABLE | CHECK R521 FOR INCREASE IN VALUE (2.7 OHMS) | |
MITSUBISHI | VS585 | N/A | BLUE FOCUS ADJUSTMENT INOPERATIVE | CHECK R8000 FOR INCREASE IN VALUE | |
MITSUBISHI | VS585 | N/A | SEVERE CONVERGENCE SHIFT--NEEDS CONSTANT ADJUST. | CHECK IC800 | |
MITSUBISHI | VS586 | N/A | POOR RECEPTION--SOME COLOR IN PIX BUT NO VIDEO | RESOLDER ALL GROUND CONNECTIONS FOR THE SHIELD ON | |
MITSUBISHI | VS586 | N/A | SEVERE CONVERGENCE SHIFT--NEEDS CONSTANT ADJUST. | CHECK IC800 | |
MITSUBISHI | VS586 | N/A | BLUE FOCUS ADJUSTMENT INOPERATIVE | CHECK R8000 FOR INCREASE IN VALUE | |
MITSUBISHI | VS586 | N/A | FAILURE OF THE CONVERGENCE IC's (IC8A0 & IC8A1) | REPLACE IC8A0/IC8A1 AND CHECK CONNECTIONS AT THE | |
MITSUBISHI | VS6004R | N/A | NO ADJUSTMENTS WORK IN THE TEST MODE | CHECK/REPLACE D714 (P/N# 264P465060) | |
MITSUBISHI | VS6051 | N/A | PICTURE BLOOMS | CHECK/REPLACE T501 (P/N# 334P191070) AND Q502 (P/N# 260P559050) | |
MITSUBISHI | VS685 | N/A | POOR RECEPTION--SOME COLOR IN PIX BUT NO VIDEO | RESOLDER ALL GROUND CONNECTIONS FOR THE SHIELD ON | |
MITSUBISHI | VS685 | N/A | BLUE FOCUS ADJUSTMENT INOPERATIVE | CHECK R8000 FOR INCREASE IN VALUE | |
MITSUBISHI | VS685 | N/A | FAILURE OF THE CONVERGENCE IC's (IC8A0 & IC8A1) | REPLACE IC8A0/IC8A1 AND CHECK CONNECTIONS AT THE | |
MITSUBISHI | VS685 | N/A | SEVERE CONVERGENCE SHIFT--NEEDS CONSTANT ADJUST. | CHECK IC800 | |
MULTITECH | MC1910R | N/A | DEAD SET--NO 5V TO UPROC. IC | CHECK FOR SHORTED D009 (5.6V ZENER) | |
NEC | N/A | W14A1 | HAS SOUND AND HIGH VOLTAGE BUT NO PIX (MISSING HORZ. DEFLECTION TO DRIVE YOKES) | CHECK/REPLACE Q516 AND R567 | |
NEC | N/A | W9A1 | HAS SOUND AND HIGH VOLTAGE BUT NO PIX (MISSING HORZ. DEFLECTION TO DRIVE YOKES) | CHECK/REPLACE Q516 AND R567 | |
NEC | N/A | X8A1 | POOR OR NO AFT LOCK | CHECK/REPLACE T203 (NEC P/N# 60253021) (C/M P/N# MS00010) | |
NEC | CT2060 | N/A | DEAD SET - POWER LIGHT COMES ON BUT RELAY DOESN'T CLICK | CHECK/REPLACE TR111 FOR SHORT | |
NEC | CT2060 | N/A | BLOWS B+ FUSE F602 | CHECK/REPLACE D608,D609 AND IC601 | |
NEC | CT2510A | X17A1 | DEAD SET AND STAND-BY LIGHT IS ON | CHECK/REPLACE IC601 | |
NEC | CT2510A | X17A1 | EXCESSIVE BRIGHTNESS WITH LITTLE NO CONTROL | CHECK R517 | |
NEC | CT2510A | X17A1 | DEAD SET AND STAND-BY LIGHT IS ON | CHECK/REPLACE IC601 | |
NEC | CT2510A | X17A1 | DEAD SET WITH A '0' IN THE FAR LEFT DIGIT LIT | CHECK/REPLACE Z101 CRYSTAL | |
NEC | CT2510A | X17A1 | DEAD SET AND STAND-BY LIGHT IS ON | CHECK/REPLACE IC601 | |
NEC | CT2510A | X17A1 | LOSS OF CONTRAST AND BRIGHTNESS | CHECK/REPLACE R528 AND R529 | |
NEC | CT2510A | X17A1 | NO VERT SWEEP | REPLACE C411 | |
NEC | CT2510A | X17A1 | LINES AT TOP OF PIX | REPLACE C414 | |
NEC | CT2510A | X17A1 | INTERMITTENT VERTICAL FOLDOVER AT THE BOTTOM OF PICTURE AND THE TOP IS STRETCHED. | CHECK/REPLACE DEFLECTION YOKE | |
NEC | CT2510A | X17A1 | INTERMITTENT RETRACE LINES AT TOP OF PIX | REPLACE IC401 CHECK C414 | |
NEC | CT2510A | X17A1 | NO VOLUME CONTROL | CHECK A PLUG PIN 1 ON THE A/V BOARD | |
NEC | CT2510A | X17A1 | NO VERT SWEEP | REPLACE C411 | |
NEC | CT2510A | X17A1 | NO PICTURE NO AUDIO | CHECK FOR OPEN CONNECTION AT PIN 6 OFF FBT AND R523 | |
NEC | CT2510A | X17A1 | DEAD SET WITH A '0' IN THE FAR LEFT DIGIT LIT | CHECK/REPLACE Z101 CRYSTAL | |
NEC | CT2510A | X17A1 | DEAD SET-STANDBY LIGHT ON | CHECK IC601 | |
NEC | CT2510A | X17A1 | DEAD SET OR PIX PULLED IN ON THE SIDES | IC601,TR601,D652 | |
NEC | CT2510A | X17A1 | VERTICAL FOLDOVER ABOUT 2' AT TOP | CHECK/REPLACE C517 AND C414 | |
NEC | CT2510A | X17A1 | NO VERTICAL SWEEP OR VERY LITTLE VERT. SWEEP | CHECK/REPLACE C411 (6.8uF @ 35v) | |
NEC | CT2510A | X17A1 | VERTICAL FOLDOVER ABOUT 2' AT TOP | CHECK/REPLACE C517 AND C414 | |
NEC | CT2510A | X17A1 | VERTICAL COMPRESSION AT TOP | CHECK/REPLACE C412 | |
NEC | CT2510A | X17A1 | DISPLAY OK INTERMITTENT OR NO POWER UP | CHECK/REPLACE JOINTS ON C655 | |
NEC | CT2510A | X17A1 | LED READOUT SHOWS '0' OR '1' AND CHANGE WITH CHANNEL CHANGE - REMOTE FUNCTIONS ARE NORMAL. | CHECK/REPLACE TR104 | |
NEC | CT2510A | X17A1 | LED READOUT SHOWS '0' OR '1' AND CHANGE WITH CHANNEL CHANGE - REMOTE FUNCTIONS ARE NORMAL. | CHECK/REPLACE TR104 | |
NEC | CT2510A | X17A1 | VERT. COMPRESSION @ TOP W/RETRACE LINES | CHECK C414 | |
NEC | CT2510A | X17A1 | NO VERTICAL SWEEP OR VERY LITTLE VERT. SWEEP | CHECK/REPLACE C411 (6.8uF @ 35v) | |
NEC | CT2510A | X17A1 | SNOWY PIX | CHECK IF CABLE CONNECTIONS | |
NEC | CT2510A | X17A1 | DEAD SET AND STAND-BY LIGHT IS ON | CHECK/REPLACE IC601 | |
NEC | CT2510A | X17A1 | LINES AT TOP OF PIX | REPLACE C414 | |
NEC | CT2510A | X17A1 | PICTURE DARK WITH RETRACE LINES AT TOP AND VERY LITTLE BRIGHTNESS CONTROL | CHECK/REPLACE T502 IF HIGH VOLTAGE AND SCREEN VOLTAGE ARE LOW | |
NEC | CT2510A | X17A1 | EXCESSIVE BRIGHTNESS WITH LITTLE NO CONTROL | CHECK R517 | |
NEC | CT2510A | X17A1 | RETRACE @ THE TOP OF SCREEN | C414 OPEN | |
NEC | CT2510A | X17A1 | LED READOUT SHOWS '0' OR '1' AND CHANGE WITH CHANNEL CHANGE - REMOTE FUNCTIONS ARE NORMAL. | CHECK/REPLACE TR104 | |
NEC | CT2510A | X17A1 | HORI. WILL NOT HOLD READJUSTMENT DOES NOT LAST | CHECK/REPLACE C501 | |
NEC | CT2510A | X17A1 | HIGH PITCHED SQUEAL FROM SWITCHING XFRM | REPLACE C609 | |
NEC | CT2510A | X17A1 | INTERMITTENT VIDEO SOUND WHEN USING TUNER ONLY | CHECK /REPLACE THE IC SOCKET OF IC201 | |
NEC | CT2510A | X17A1 | HIGH PITCHED SQUEAL FROM SWITCHING XFRM | REPLACE C609 | |
NEC | CT2510A | X17A1 | NO VERTICAL SWEEP | CHECK/REPLACE C411 FOR LEAKY (6.8uF @ 35v TANTALUM) | |
NEC | CT2510A | X17A1 | WILL NOT HOLD HORIZONTAL SYNC. - HORZ. HOLD HAS TO BE READJUSTED AFTER 30 MINUTES OR SO. | CHECK/REPLACE C501 FOR LEAKY | |
NEC | CT2510A | X17A1 | LINES AT TOP OF PIX | REPLACE C414 | |
NEC | CT2510A | X17A1 | DEAD SET AND STAND-BY LIGHT IS ON | CHECK/REPLACE IC601 | |
NEC | CT2510A | X17A1 | VERTICAL FOLDOVER ABOUT 2' AT TOP | CHECK/REPLACE C517 AND C414 | |
NEC | CT2510A | X17A1 | LED READOUT SHOWS '0' OR '1' AND CHANGE WITH CHANNEL CHANGE - REMOTE FUNCTIONS ARE NORMAL. | CHECK/REPLACE TR104 | |
NEC | CT2510A | X17A1 | LED READOUT SHOWS '0' OR '1' AND CHANGE WITH CHANNEL CHANGE - REMOTE FUNCTIONS ARE NORMAL. | CHECK/REPLACE TR104 | |
NEC | CT2510A | X17A1 | DEAD SET WITH A '0' IN THE FAR LEFT DIGIT LIT | CHECK/REPLACE Z101 CRYSTAL | |
NEC | CT2510A | X17A1 | LOUD BUZZ OR VIBRATION INSIDE UNIT | CHECK/REPLACE CRT YOKE | |
NEC | CT2510A | X17A1 | LED READOUT SHOWS '0' OR '1' AND CHANGE WITH CHANNEL CHANGE - REMOTE FUNCTIONS ARE NORMAL. | CHECK/REPLACE TR104 | |
NEC | CT2510A | X17A1 | INTERMITTENT PICTURE--SOUND OK | CHECK ALL FLYBACK CONNECTIONS | |
NEC | CT2510A | X17A1 | DEAD SET WITH A '0' IN THE FAR LEFT DIGIT LIT | CHECK/REPLACE Z101 CRYSTAL | |
NEC | CT2510A | X17A1 | PICTURE BLANKS OUT AUDIO LOW AND DISTORTED | REPLACE IC201 | |
NEC | CT2510A | X17A1 | NO VERTICAL SWEEP | CHECK/REPLACE C411 | |
NEC | CT2510A | X17A1 | HIGH PITCHED SQUEAL FROM SWITCHING XFRM | REPLACE C609 | |
NEC | CT2510A | X17A1 | DEAD SET WITH A '0' IN THE FAR LEFT DIGIT LIT | CHECK/REPLACE Z101 CRYSTAL | |
NEC | CT2510A | X17A1 | VERTICAL FOLDOVER ABOUT 2' AT TOP | CHECK/REPLACE C517 AND C414 | |
NEC | CT2510A | X17A1 | NO PICTURE OR SOUND - ONLY A HIGH PITCHED SQUEAL | CHECK/REPLACE T501 FOR OPEN | |
NEC | CT2510A | X17A1 | LOUD BUZZ OR VIBRATION INSIDE UNIT | CHECK/REPLACE CRT YOKE | |
NEC | CT2510A | X17A1 | INTERMITTENT POWER ON/OFF--OCCASIONALLY DEAD | CHECK CONNECTIONS ON C655 | |
NEC | CT2510A | X17A1 | RETRACE LINES AT TOP OF PIX | CHECK/REPLACE C414 | |
NEC | CT2510A | X17A1 | DEAD SET WITH A '0' IN THE FAR LEFT DIGIT LIT | CHECK/REPLACE Z101 CRYSTAL | |
NEC | CT2510A | X17A1 | DARK PIX WITH RETRACE--LOOKS LIKE CRT IS BAD | CHECK VOLTS @ TR901,TR902,TR903;CHECK R517,D501 | |
NEC | CT2510A | X17A1 | FLAGGING WHEN USED WITH A VCR | CHECK FOR PROPER ADJUSTMENT OF VR501 (HORZ. HOLD) | |
NEC | CT2510A | X17A1 | NO AUDIO FROM TV OR AUX INPUTS | CHECK IC301 AND IC302 | |
NEC | CT2510A | X17A1 | VERTICAL FOLDOVER ABOUT 2' AT TOP | CHECK/REPLACE C517 AND C414 | |
NEC | CT2510A | X17A1 | DEAD SET WITH A '0' IN THE FAR LEFT DIGIT LIT | CHECK/REPLACE Z101 CRYSTAL | |
NEC | CT2510A | X17A1 | NO PICTURE AND NO SOUND-HIGH PITCHED NOISE COMING FROM FLYBACK TRANSFORMER | CHECK/RESOLDER ALL FLYBACK CONNECTIONS | |
NEC | CT2510A | X17A1 | NO LUMINANCE SMALL AMOUNT OF COLOR | SHECK FOR OPEN C517 | |
NEC | CT2510A | X17A1 | LED READOUT SHOWS '0' OR '1' AND CHANGE WITH CHANNEL CHANGE - REMOTE FUNCTIONS ARE NORMAL. | CHECK/REPLACE TR104 | |
NEC | CT2606A | X26A | INTERMITTENT AUDIO | CHECK/RESOLDER CONNECTIONS ON IC201 (TA7777) ESPECIALLY PINS 32,33,34, AND 35 | |
NEC | CT2606A | X26A | INTERMITTENT AUDIO | CHECK CONNECTIONS ON IC (TA7777) ESPECIALLY PINS 32, 33,34,35 AND ANY OTHER THAT LOOK SUSPICIOUS. | |
NEC | CT2606A | X26A1 | NO AUDIO ON NON STEREO CHANNELS | CHECK FL303 FOR OPEN | |
NEC | CT2610A | N/A | RELAY CLICKS AND SET HAS HIGH VOLTAGE - NO SOUND OR PIX | CHECK/RESOLDER CONNECTIONS ON D502 | |
NEC | CT2610A | N/A | HIGH PITCHED SQUEAL WITH SET ON AND B+ AT PIN 1 OF 'Q' IS 200-300 VOLTS. | CHECK/REPLACE IC601 | |
NEC | CT2610A | X17A1 | VERTICAL FOLDOVER ABOUT 2' AT TOP | CHECK/REPLACE C517 AND C414 | |
NEC | CT2610A | X17A1 | DEAD SET OR PIX PULLED IN ON THE SIDES | IC601,TR601,D652 | |
NEC | CT2610A | X17A1 | NO VERT SWEEP | REPLACE C411 | |
NEC | CT2610A | X17A1 | LED READOUT SHOWS '0' OR '1' AND CHANGE WITH CHANNEL CHANGE - REMOTE FUNCTIONS ARE NORMAL. | CHECK/REPLACE TR104 | |
NEC | CT2610A | X17A1 | DEAD SET WITH A '0' IN THE FAR LEFT DIGIT LIT | CHECK/REPLACE Z101 CRYSTAL | |
NEC | CT2610A | X17A1 | LINES AT TOP OF PIX | REPLACE C414 | |
NEC | CT2610A | X17A1 | DEAD SET AND STAND-BY LIGHT IS ON | CHECK/REPLACE IC601 | |
NEC | CT2610A | X17A1 | HIGH PITCHED SQUEAL FROM SWITCHING XFRM | REPLACE C609 | |
NEC | CT2700S | X23A1 | HOUR GLASS SHAPED PICTURE | CHECK/REPLACE VR402 AND VR403 OR TRY CLEANING CONTROLS | |
NEC | DT4362S | W9A1 | HAS SOUND AND HIGH VOLTAGE BUT NO PIX (MISSING HORZ. DEFLECTION TO DRIVE YOKES) | CHECK/REPLACE Q516 AND R567 | |
NEC | DT4861S | W9A1 | HAS SOUND AND HIGH VOLTAGE BUT NO PIX (MISSING HORZ. DEFLECTION TO DRIVE YOKES) | CHECK/REPLACE Q516 AND R567 | |
NEC | DT4871S | W9A1 | HAS SOUND AND HIGH VOLTAGE BUT NO PIX (MISSING HORZ. DEFLECTION TO DRIVE YOKES) | CHECK/REPLACE Q516 AND R567 | |
NEC | KX2750A | X23A1 | HOUR GLASS SHAPED PICTURE | CHECK/REPLACE VR402 AND VR403 OR TRY CLEANING CONTROLS | |
NEC | KX2750A | X23A1 | BACKGROUND AREAS HAVE BENDING ON VERTICAL OBJECTS | CHECK/REPLACE C418,C419 AND C421 IN PINCUSION CIRCUIT | |
NEC | KX2750A | X23A1 | VERTICAL JITTER | CHANGE R402 TO A 1.8meg AND R403 TO A 390k | |
NEC | KX2750A | X23A1 | LOSS OF CONTRAST AND BRIGHTNESS | CHECK/REPLACE R528 AND R529 | |
NEC | KX2750A | X23A1 | NO REMOTE FUNCTIONS | CHECK/REPLACE THE REMOTES LED RESOLDER THE BATTER TER | |
NEC | KX2750A | X23A1 | HOUR GLASS SHAPED PICTURE | CHECK/REPLACE VR402 AND VR403 OR TRY CLEANING CONTROLS | |
NEC | KX2750A | X23A1 | INTERMITTENT SOUND WITH STATIC AND POPPING | CHECK/RESOLDER CONNECTIONS ON IC301 AND IC302 | |
NEC | KX2750A | X23A1 | PICTURE IS STRETCHED AT THE TOP BUT BOTTOM IS NORMAL | CHECK/REPLACE C407 FOR OPEN | |
NEC | KX2750A | X23A1 | POOR PINCUSHION WITH NO ADJUSTMENT | CHECK/REPLACE C421 | |
NEC | KX2750A | X23A1 | POOR PINCUSHION WITH NO ADJUSTMENT | CHECK/REPLACE C421 | |
NEC | PJ4010EN | W3A1 | NO VIDEO SOUND HV OK | CHECK OR REPLACE IC691 | |
NEC | PJ4010EN | W3A1 | INTERMITTENT VIDEO SHUT DOWN | REPLACE C411 AND TR403 | |
NEC | PJ4010EN | W3A1 | CONVERGENCE OFF | R543 CHANGED VALUE | |
NEC | PJ4010EN | W3A1 | NO VHF UHF OR CATV VIDEO INPUTS OK | CHECK/REPLACE R542 | |
NEC | PJ4010EN | W3A1 | SOUND,CRT FILAMENTS BUT NO PIX | POOR CONN. ON FS,N,VS,B,W,X,Q401,Q402,Q403 | |
NEC | PJ4010EN | W3A1 | NO RASTER,SUB BRIGHT WILL NOT ADJUST SOUND OK | CHECK/REPLACE R531 | |
NEC | PJ4010EN | W3A1 | CRACKLING OR RUMBLING NOISE ONE CHANNEL | CHECK C3061 OR C3062 | |
NEC | PJ4010EN | W3A1 | NO RASTER - SOUND OK | CHECK R522,D503,R531 OR CONNECTIONS | |
NEC | PJ4010EN | W3A1 | LIGHT HORIZT. LINE THRU PIX. CENTER | CHECK/REPLACE TR403 | |
NEC | PJ4010EN | W3A1 | REDUCED VERTICAL DEFLECTION | CLEAN IC401,PINSOCKET CONN.&RESOLDER TR401,TR402,403 | |
NEC | PJ4010EN | W3A1 | NO RASTER-NO SOUND | CHECK R519,D502 | |
NEC | PJ4010EN | W3A1 | SNOWY PIX | R542 OPEN | |
NEC | PJ4010EN | W3A1 | LOSS OF LEFT SIDE CONVERGENCE | CHECK/REPLACE R523 D504 C518 | |
NEC | PJ4010EN | W3A1 | NO HORZ. SYNC | R523 OPEN AND D504 SHORTED | |
NEC | PJ4010EN | W3A1 | BRIGHT BAR WITH HORIZ. TEAR DRIFT BOTTOM TO TOP | CHECK/REPLACE D121 | |
NEC | PJ4010EN | W3A1 | NO RASTER-SOUND OK OR PIX INTERMITTENT | TR401,TR402,TR403 OR CONNECTIONS ON THESE | |
NEC | PJ4010EN | W3A1 | CONVERGENCE OFF | R524 OPEN OR CHANGED, D505 MAY ALSO BE SHORTED | |
NEC | PJ4350 | W14A3 | NO OR INTERMITTENT VERTICAL SWEEP | CHECK/RESOLDER CONNECTIONS ON Q401 AND Q402 | |
NEC | PJ4350S | W14A3 | SOUND BUT NO PICTURE - DOES HAVE HIGH VOLTAGE | CHECK/REPLACE Q515 AND R567 | |
orion | tvcr1921 | N/A | no tuner video.tape video ok | a/v jacks-clean or replace | |
ORION | KC1963D | N/A | WON'T SHUT OFF INTERMITTENTLY | CHECK/REPLACE SR01 RELAY WITH NEW TYPE (P/N 11146015) | |
ORION | KC1963D | N/A | DEAD SET | CHECK/REPLACE FB401,Q401 AND R511 | |
PANASONIC | CT1110A | N/A | IMMEDIATE SHUTDOWN AT LINE VOLTAGE | CHECK/REPLACE C509 (100uF @ 160v) | |
PANASONIC | CT216 | N/A | NO AUDIO BUT PIX IS FINE | CHECK/REPLACE IC201 FOR OPEN | |
PANASONIC | CT2582Y | N/A | NO VERTICAL DEFLECTION | CHECK/REPLACE IC451 (P/N# LA7836), C451 (100uF @ 50v) | |
PANASONIC | CT27S18S | N/A | UNIT WON'T ALWAYS SHUT OFF - SET MAY PULL IN ON BOTH SIDES WHEN POWER IS TURNED OFF | CHECK/REPLACE RL001 (P/N# TSEH8007) - MAY BE INTERMITTENT | |
PANASONIC | CT3053 | NMXL4 | INT.WON'T TURN ON/SHUTS OFF INT. | CHECK CONNECTIONS ON HORZ. DRIVER XFRM. (T501) | |
PANASONIC | CT9012 | N/A | DEAD SET-SCR WON'T REGULATE | OPEN R802 | |
PANASONIC | CT9012 | N/A | INTERMITTENT HORZ. FREQ. DRIFTING OR TEARING | CHECK CONNECTIONS ON T501 | |
PANASONIC | CTF2501 | GXLHNM | SET GOES INTO SHUTDOWN AT TURN ON | CHECK Q801,Q802,Q803,Q804,D807 AND D808 | |
PANASONIC | CTF2501 | GXLHNM | PIX PULLED IN ON SIDES | CHECK C577 | |
PANASONIC | CTF2501 | GXLHNM | SHORT VERTICAL SWEEP | CHECK C562,C454,Q451,Q452,Q453 | |
PANASONIC | CTF2501 | GXLHNM | DARK SMEARY PIX--ESPECIALLY ON THE LEFT SIDE | CHECK C564 | |
PANASONIC | CTF2501 | GXLHNM | DEAD SET | CHECK FOR OPEN R801 AND/OR R802 | |
PANASONIC | CTF2502 | GXLHNM | SHORT VERTICAL SWEEP | CHECK C562,C454,Q451,Q452,Q453 | |
PANASONIC | CTF2502 | GXLHNM | PIX PULLED IN ON SIDES | CHECK C577 | |
PANASONIC | CTF2502 | GXLHNM | SET GOES INTO SHUTDOWN AT TURN ON | CHECK Q801,Q802,Q803,Q804,D807 AND D808 | |
PANASONIC | CTF2502 | GXLHNM | DEAD SET | CHECK FOR OPEN R801 AND/OR R802 | |
PANASONIC | CTF2502 | GXLHNM | DARK SMEARY PIX--ESPECIALLY ON THE LEFT SIDE | CHECK C564 | |
PANASONIC | CTF2509 | GXLHNM | SHORT VERTICAL SWEEP | CHECK C562,C454,Q451,Q452,Q453 | |
PANASONIC | CTF2509 | GXLHNM | DARK SMEARY PIX--ESPECIALLY ON THE LEFT SIDE | CHECK C564 | |
PANASONIC | CTF2509 | GXLHNM | SET GOES INTO SHUTDOWN AT TURN ON | CHECK Q801,Q802,Q803,Q804,D807 AND D808 | |
PANASONIC | CTF2509 | GXLHNM | PIX PULLED IN ON SIDES | CHECK C577 | |
PANASONIC | CTF2509 | GXLHNM | DEAD SET | CHECK FOR OPEN R801 AND/OR R802 | |
PANASONIC | CTF2561 | GXLHNYCRD | SHORT VERTICAL SWEEP | CHECK C562,C454,Q451,Q452,Q453 | |
PANASONIC | CTF2561 | GXLHNYCRD | DARK SMEARY PIX--ESPECIALLY ON THE LEFT SIDE | CHECK C564 | |
PANASONIC | CTF2561 | GXLHNYCRD | PIX PULLED IN ON SIDES | CHECK C577 | |
PANASONIC | CTF2561 | GXLHNYCRD | DEAD SET | CHECK FOR OPEN R801 AND/OR R802 | |
PANASONIC | CTF2561 | GXLHNYCRD | SET GOES INTO SHUTDOWN AT TURN ON | CHECK Q801,Q802,Q803,Q804,D807 AND D808 | |
PANASONIC | CTF2564 | GXLHNYCRD | PIX PULLED IN ON SIDES | CHECK C577 | |
PANASONIC | CTF2564 | GXLHNYCRD | SHORT VERTICAL SWEEP | CHECK C562,C454,Q451,Q452,Q453 | |
PANASONIC | CTF2564 | GXLHNYCRD | DEAD SET | CHECK FOR OPEN R801 AND/OR R802 | |
PANASONIC | CTF2564 | GXLHNYCRD | DARK SMEARY PIX--ESPECIALLY ON THE LEFT SIDE | CHECK C564 | |
PANASONIC | CTF2564 | GXLHNYCRD | SET GOES INTO SHUTDOWN AT TURN ON | CHECK Q801,Q802,Q803,Q804,D807 AND D808 | |
PANASONIC | CTF2568 | GXLHNYCRD | DARK SMEARY PIX--ESPECIALLY ON THE LEFT SIDE | CHECK C564 | |
PANASONIC | CTF2568 | GXLHNYCRD | DEAD SET | CHECK FOR OPEN R801 AND/OR R802 | |
PANASONIC | CTF2568 | GXLHNYCRD | SET GOES INTO SHUTDOWN AT TURN ON | CHECK Q801,Q802,Q803,Q804,D807 AND D808 | |
PANASONIC | CTF2568 | GXLHNYCRD | PIX PULLED IN ON SIDES | CHECK C577 | |
PANASONIC | CTF2568 | GXLHNYCRD | SHORT VERTICAL SWEEP | CHECK C562,C454,Q451,Q452,Q453 | |
PANASONIC | CTJ1942R | ADP179 | DEAD SET | CHECK/REPLACE D801,D802,D803,D804 AND F001 | |
PANASONIC | CTJ2062R | N/A | DEAD - NO ATTEMPT TO TURN ON | CHECK/REPLACE D801,D802,D803 AND D804 | |
PANASONIC | CTN2032R | AMDP211 | SET SAYS VIDEO 1 ON SCREEN AND SET DOESN'T HAVE THIS FEATURE - WON'T SHUT OFF | CHECK/REPLACE ON/OFF RELAY | |
PANASONIC | CTN3188S | AMEDP212 | NO VERTICAL SWEEP | CHECK/REPLACE C452 (220uF @ 35v) AND C455 (100uF @ 35v) | |
PHILCO | C2910 | E30 | NO AUDIO--PIX OK | REPLACE R120,SC100 | |
PHILCO | C2910 | E30 | NO START-UP,TICKING FROM FLYBACK,SHUT DOWN | CHECK R548 | |
PHILCO | C2910 | E30 | HI BRITE W/RETRACE,GOES INTO SHUT DOWN | CHECK C540 | |
PHILCO | C2910 | E30 | INTERMITTENT START-UP | CHECK XT700 XTAL. | |
PHILCO | C2910 | E30 | DEAD SET,FS501 BLOWN | CHECK Q402,T402 | |
PHILCO | C2910QW | E32 | R460 OR Q400 REPEATED FAILURE | REPLACE C518 | |
PHILCO | C2910QW | E32 | SET SHUTS DOWN AT TURN ON-SC512 SHORT-R512 OPEN | REPLACE SC512,R512 AND RESOLDER R500 AND R529 | |
PHILCO | C2910QW | E32 | R460 OR Q400 REPEATED FAILURE | REPLACE C518 | |
PHILCO | C2910QW | E32 | DARK SMEARY PIX | CHECK FOR OPEN C540 | |
PHILCO | C2910QW | E32 | R460 OR Q400 REPEATED FAILURE | REPLACE C518 | |
PHILCO | C2910QW | E32 | SCR WILL NOT START UP | CHECK/REPLACE SC512 AND R512 | |
PHILCO | C2910QW | E32 | DARK SMEARY PIX | CHECK FOR OPEN C540 | |
PHILCO | C2910QW | E32 | BRIGHT SCREEN AND SET GOES INTO SHUTDOWN | CHECK C540 FOR OPEN (BOOST FILTER) | |
PHILCO | C2910QW | E32 | SET SHUTS DOWN AT TURN ON-SC512 SHORT-R512 OPEN | REPLACE SC512,R512 AND RESOLDER R500 AND R529 | |
PHILCO | C2910QW | E32 | DARK SMEARY PIX | CHECK FOR OPEN C540 | |
PHILCO | C2910QW | E32 | ARCING IN CRT AS IF TUBE WAS SHORTED | CHECK/REPLACE Q400,Q401 AND L400 | |
PHILCO | C2910QW | E32 | NO VERTICAL SYNC | CHECK/REPLACE C710 | |
PHILCO | C2910QW | E32 | PICTURE LOOKS LIKE A UPSIDE DOWN CHRISTMAS TREE | CHECK/REPLACE R548 NEAR B+ FUSE | |
PHILCO | C2910QW | E32 | NO VERTICAL SYNC | CHECK/REPLACE IC700 | |
PHILCO | C2910QW | E32 | DARK SMEARY PIX | CHECK FOR OPEN C540 | |
PHILCO | C2910QW | E32 | NO COLOR OR BARBER POLING | CHECK R469 AND R472 FOR OPEN | |
PHILCO | C2910QW | E32 | DEAD SET - NO ATTEMPT TO START UP | CHECK/REPLACE Q400 (P/N# ECG228A) | |
PHILCO | C2910QW | E32 | NO LOW CHANNELS BUT HIGH CHANNELS AND UHF ARE OK | CHECK/REPLACE D4 ON THE TUNING BOARD. | |
PHILCO | C2910QW | E32 | R460 OR Q400 REPEATED FAILURE | REPLACE C518 | |
PHILCO | C2910QW | E32 | INTERMITTENT SNOWY PICTURE ON SETS WITH VARACTOR TUNING | CHECK/RESOLDER CONNECTIONS WHERE 2 PLUG CONNECTORS ON TUNER | |
PHILCO | C2910QW | E32 | R460 OR Q400 REPEATED FAILURE | REPLACE C518 | |
PHILCO | C2910QW | E32 | DARK SMEARY PIX | CHECK FOR OPEN C540 | |
PHILCO | C2910QW | E32 | SET SHUTS DOWN AT TURN ON-SC512 SHORT-R512 OPEN | REPLACE SC512,R512 AND RESOLDER R500 AND R529 | |
PHILCO | C2910QW | E32 | BRIGHT SCREEN WITH RETRACE LINES THEN SHUTDOWN | CHECK/REPLACE C540 FOR OPEN | |
PHILCO | C2910QW | E32 | SET SHUTS DOWN AT TURN ON-SC512 SHORT-R512 OPEN | REPLACE SC512,R512 AND RESOLDER R500 AND R529 | |
PHILCO | C2910QW | E32 | DARK SMEARY PIX | CHECK FOR OPEN C540 | |
PHILCO | C2910QW | E32 | R460 OR Q400 REPEATED FAILURE | REPLACE C518 | |
PHILCO | C2910QW | E32 | SET SHUTS DOWN AT TURN ON-SC512 SHORT-R512 OPEN | REPLACE SC512,R512 AND RESOLDER R500 AND R529 | |
PHILCO | C2910QW | E32 | SET SHUTS DOWN AT TURN ON-SC512 SHORT-R512 OPEN | REPLACE SC512,R512 AND RESOLDER R500 AND R529 | |
PHILCO | C2910QW | E32 | DARK SMEARY PIX | CHECK FOR OPEN C540 | |
PHILCO | C2910QW | E32 | SET SHUTS DOWN AT TURN ON | CHECK/REPLACE C518 FOR OPEN (MAY ONLY BE ONE SECTION BAD) | |
PHILCO | C2910QW | E32 | DEAD SET | CHECK/REPLACE R500 | |
PHILCO | C2910QW | E32 | DARK SMEARY PIX | CHECK FOR OPEN C540 | |
PHILCO | C2910QW | E32 | DEAD SET OR INTERMITTENT DEAD SET | CHECK/REPLACE XT700 (503 KHz XTAL) | |
PHILCO | C2910QW | E32 | SET SHUTS DOWN AT TURN ON-SC512 SHORT-R512 OPEN | REPLACE SC512,R512 AND RESOLDER R500 AND R529 | |
PHILCO | C3924C | 19E1 | SHORT VERT. SWEEP--ABOUT 1' TO 2' | CHECK D554 FOR OPEN | |
PHILCO | C3924C | 19E1 | INTERMITTENTLY SHUTS OFF AND WHEN TURNED BACK ON, TV HAS RESET TO CHANNEL 3 (AS IF AC WAS REMOVED) | CHECK/RESOLDER CONNECTIONS ON T471 | |
PHILCO | C3924C | 19E1 | WASHED OUT VIDEO - COLORS SMEAR WHEN ADJUSTING THE CUTOFF CONTROLS | CHECK/REPLACE Q641,Q642 AND Q643 FOR E-B SHORT | |
PHILCO | C3924C | 19E1 | AUD. OUT FAILURE--C211 TO 1uF C206 TO 470pF | PARALLEL R202 W/470pF R207 10 OHM R213,214 130 OHM | |
PHILCO | C3924C | 19E1 | REPEATED AUDIO OUTPUT FAILURES | CHECK TWEETER FOR SHORT (IT SHOULD CHECK OPEN) | |
PHILCO | C3924C | 19E1 | SHORT VERT. SWEEP--ABOUT 1' TO 2' | CHECK D554 FOR OPEN | |
PHILCO | C3924C | 19E1 | INTERMITTENTLY SHUTS OFF AND WHEN TURNED BACK ON, TV HAS RESET TO CHANNEL 3 (AS IF AC WAS REMOVED) | CHECK/RESOLDER CONNECTIONS ON T471 | |
PHILCO | C3924C | 19E4 | INTERMITTENT POP IN THE AUDIO AFTER SET IS WARM | CHECK/REPLACE Y602 | |
PHILCO | C3924C | 19E4 | SHORT VERT. SWEEP--ABOUT 1' TO 2' | CHECK D554 FOR OPEN | |
PHILCO | C3924C | 19E4 | INTERMITTENT POP AND LOW VOLUME AFTER A FEW MINUTES | CHECK/REPLACE Y602 (CERAMIC FILTER) | |
PHILCO | P1320RC805 | 13D601 | SET WILL NOT SHUT OFF | CHECK/REPLACE Q400 (P/N# TIP47) | |
PHILCO | P1320RC805 | 13D601 | NO VERTICAL SWEEP - R445 BURNS UP AND IC550 GETS HOT AND SHORTS REPEATEDLY. | CHECK/RESOLDER CONNECTIONS ON C447 AND REPLACE R445 (1 ), D445 (SUB # ECG552) AND IC550 (LA7831) | |
PHILCO | P1320RC805 | 13D601 | DEAD SET OR WON'T SHUT OFF OR WON'T TUNE | CHECK/REPLACE IC345 | |
PHILCO | P1320RC805 | 13D601 | INTERMITTENT OR MISSING ONE PRIMARY COLOR | CHECK/REPLACE Q21,Q22 OR Q23 ON CRT BOARD - MAY BE LABELED AS Q1,Q2,Q3 (P/N# 483513047059) | |
PHILCO | P1320RC805 | 13D601 | DISTORTED AUDIO OR NO AUDIO | CHECK/REPLACE L221 (P/N# 483515757113) | |
PHILCO | P1320RC805 | 13D601 | SET GOES INTO SHUTDOWN - MAY STAY ON WITH HORZ. LINES OR TEARING IN THE PICTURE | CHECK/REPLACE C432 (100uF @ 200v) | |
PHILCO | P1320RC805 | 13D601 | DEAD SET | CHECK/REPLACE R432 (1K ) | |
PHILCO | P1321R | 13G6 | REPEATED HORZ. OUTPUT FAILURE | CHANGE Q501 WITH (483513041782), R502 W/2k (483511657409), INSTALL C509 (483512247008) & DIODE/RES. KIT (483521957539) | |
PHILCO | P1321RC2 | 13G6 | SET WILL NOT SHUT OFF | CHECK/REPLACE Q400 (P/N# TIP47) | |
PHILCO | P1321RC2 | 13G6 | NO VERTICAL SWEEP - R445 BURNS UP AND IC550 GETS HOT AND SHORTS REPEATEDLY. | CHECK/RESOLDER CONNECTIONS ON C447 AND REPLACE R445 (1 ), D445 (SUB # ECG552) AND IC550 (LA7831) | |
PHILCO | P1920RC822 | 19D603 | DISTORTED AUDIO OR NO AUDIO | CHECK/REPLACE L221 (P/N# 483515757113) | |
PHILCO | P1923R | 19G6 | REPEATED HORZ. OUTPUT FAILURE | CHANGE Q501 WITH (483513041782), R502 W/2k (483511657409), INSTALL C509 (483512247008) & DIODE/RES. KIT (483521957539) | |
PHILCO | P1924CR1 | 19V683 | WHEN SET IS TURNED OFF OR IF POWER IS INTERUPTED, THEN SET WILL TURN OFF-ON-OFF | CHECK/REPLACE D602 (P/N# 483513037826) | |
PHILCO | R3940C | 19E1 | SHORT VERT. SWEEP--ABOUT 1' TO 2' | CHECK D554 FOR OPEN | |
PHILCO | R3940C | 19E1 | INTERMITTENTLY SHUTS OFF AND WHEN TURNED BACK ON, TV HAS RESET TO CHANNEL 3 (AS IF AC WAS REMOVED) | CHECK/RESOLDER CONNECTIONS ON T471 | |
PHILCO | R3940C | 19E1 | INTERMITTENTLY SHUTS OFF AND WHEN TURNED BACK ON, TV HAS RESET TO CHANNEL 3 (AS IF AC WAS REMOVED) | CHECK/RESOLDER CONNECTIONS ON T471 | |
PHILCO | R3940C | 19E1 | WASHED OUT VIDEO - COLORS SMEAR WHEN ADJUSTING THE CUTOFF CONTROLS | CHECK/REPLACE Q641,Q642 AND Q643 FOR E-B SHORT | |
PHILCO | R3940C | 19E1 | SHORT VERT. SWEEP--ABOUT 1' TO 2' | CHECK D554 FOR OPEN | |
PHILCO | R3940C | 19E1 | AUD. OUT FAILURE--C211 TO 1uF C206 TO 470pF | PARALLEL R202 W/470pF R207 10 OHM R213,214 130 OHM | |
PHILCO | R3940C | 19E1 | REPEATED AUDIO OUTPUT FAILURES | CHECK TWEETER FOR SHORT (IT SHOULD CHECK OPEN) | |
PHILCO | R3940C | 19E4 | SHORT VERT. SWEEP--ABOUT 1' TO 2' | CHECK D554 FOR OPEN | |
PHILCO | R3940C | 19E4 | INTERMITTENT POP AND LOW VOLUME AFTER A FEW MINUTES | CHECK/REPLACE Y602 (CERAMIC FILTER) | |
PHILCO | R3940C | 19E4 | INTERMITTENT POP IN THE AUDIO AFTER SET IS WARM | CHECK/REPLACE Y602 | |
PHILCO | R4042C | 20F1 | NO PICTURE - SOUND OK - HV OK | CHECK/REPLACE T501 (P/N# 483514887065) | |
PHILCO | R4042C | 20F1 | REPEATED AUDIO OUTPUT FAILURES | CHECK TWEETER FOR SHORT (IT SHOULD CHECK OPEN) | |
PHILCO | R4042C | 20F1 | NO COLOR | CHECK/REPLACE R638 | |
PHILCO | R4042C | 20F1 | HORZ. FREQUENCY DRIFTS | CHECK/REPLACE R247 | |
PHILCO | R4042C | 20F1 | NO VIDEO | CHECK/REPLACE Y609 | |
PHILCO | R4042C | 20F1 | SET GOING INTO SHUTDOWN | CHECK IC400 | |
PHILCO | R4042C | 20F1 | WASHED OUT VIDEO - COLORS SMEAR WHEN ADJUSTING THE CUTOFF CONTROLS | CHECK/REPLACE Q641,Q642 AND Q643 FOR E-B SHORT | |
PHILCO | R4042C | 20F1 | DEAD SET-NO POWER-FUSES ALL OK | CHECK R471 FOR OPEN | |
PHILCO | R4042C | 20F1 | NO START UP - DEAD SET | CHECK/RESOLDER CONNECTIONS ON R450 AND R452 ALSO CHECK/REPLACE IC400 (P/N# STR30130) | |
PHILCO | R4042C | 20F1 | SNOWY RASTER AND AUDIO FROM ONE CHANNEL IS ALL THAT CAN BE HEARD - CHANNEL NUMBER DOES CHANGE | CHECK/REPLACE TUNER OR PRESCALER IC INSIDE TUNER IC - (P/N# 483520987893) | |
PHILCO | R4042C | 20F1 | NO PICTURE - SOUND OK - HV OK | CHECK/REPLACE T501 (P/N# 483514887065) | |
PHILCO | R4042C | 20F1 | NO START UP - DEAD SET | CHECK/RESOLDER CONNECTIONS ON R450 AND R452 ALSO CHECK/REPLACE IC400 (P/N# STR30130) | |
PHILCO | R4042C | 20F1 | NO COLOR | CHECK/REPLACE Q640 | |
PHILCO | R4042C | 20F1 | NO VIDEO | CHECK/REPLACE D640 | |
PHILCO | R4042C | 20F1 | AUD. OUT FAILURE--C211 TO 1uF C206 TO 470pF | PARALLEL R202 W/470pF R207 10 OHM R213,214 130 OHM | |
PHILCO | R4042C | 20F1 | DEAD SET-NO POWER-FUSES ALL OK | CHECK R471 FOR OPEN | |
PHILCO | R4075C | 20F1 | SET GOING INTO SHUTDOWN | CHECK IC400 | |
PHILCO | R4075C | 20F1 | NO COLOR | CHECK/REPLACE Q640 | |
PHILCO | R4075C | 20F1 | NO PICTURE - SOUND OK - HV OK | CHECK/REPLACE T501 (P/N# 483514887065) | |
PHILCO | R4075C | 20F1 | REPEATED AUDIO OUTPUT FAILURES | CHECK TWEETER FOR SHORT (IT SHOULD CHECK OPEN) | |
PHILCO | R4075C | 20F1 | DEAD SET-NO POWER-FUSES ALL OK | CHECK R471 FOR OPEN | |
PHILCO | R4075C | 20F1 | HORZ. FREQUENCY DRIFTS | CHECK/REPLACE R247 | |
PHILCO | R4075C | 20F1 | NO VIDEO | CHECK/REPLACE Y609 | |
PHILCO | R4075C | 20F1 | NO COLOR | CHECK/REPLACE R638 | |
PHILCO | R4075C | 20F1 | WASHED OUT VIDEO - COLORS SMEAR WHEN ADJUSTING THE CUTOFF CONTROLS | CHECK/REPLACE Q641,Q642 AND Q643 FOR E-B SHORT | |
PHILCO | R4075C | 20F1 | AUD. OUT FAILURE--C211 TO 1uF C206 TO 470pF | PARALLEL R202 W/470pF R207 10 OHM R213,214 130 OHM | |
PHILCO | R4075C | 20F1 | NO START UP - DEAD SET | CHECK/RESOLDER CONNECTIONS ON R450 AND R452 ALSO CHECK/REPLACE IC400 (P/N# STR30130) | |
PHILCO | R4075C | 20F1 | NO VIDEO | CHECK/REPLACE D640 | |
PHILCO | R4075C | 20F1 | SNOWY RASTER AND AUDIO FROM ONE CHANNEL IS ALL THAT CAN BE HEARD - CHANNEL NUMBER DOES CHANGE | CHECK/REPLACE TUNER OR PRESCALER IC INSIDE TUNER IC - (P/N# 483520987893) | |
PHILCO | R4075C | 20F1 | NO START UP - DEAD SET | CHECK/RESOLDER CONNECTIONS ON R450 AND R452 ALSO CHECK/REPLACE IC400 (P/N# STR30130) | |
PHILCO | R4075C | 20F1 | DEAD SET-NO POWER-FUSES ALL OK | CHECK R471 FOR OPEN | |
PHILCO | R4075C | 20F1 | NO PICTURE - SOUND OK - HV OK | CHECK/REPLACE T501 (P/N# 483514887065) | |
PHILCO | R4943C | 25G1 | POOR AFT LOCK - ADJUSTING AFT DETECTOR HELPS BUT DOESN'T COMPLETELY CORRECT | CHECK/REPLACE Y200 SAW FILTER (P/N# 483515497068) | |
PHILCO | R4943C | 25G1 | TV CYCLING ON AND OFF | CHECK FOR SHORTED VERTICAL OUTPUT IC LOADING DOWN | |
PHILCO | R4943C | 25G1 | WEAK VIDEO IN PICTURE | CHECK/REPLACE C249 FOR SHORT | |
PHILCO | R4943C | 25G1 | SECONDARY CONTROLS LOCK-UP AFTER 30 MINUTES OF OPERATION ALSO THE OSD GRAPHICS ROLL VERTICALLY | CHECK/REPLACE D306 | |
PHILCO | R4943C | 25G1 | REDUCED LDR RANGE AND LED BRIGHTNESS | INSTALL 47K AT JUMPER B397-R91 2.4k R261 4.3k | |
PHILCO | R4943C | 25G1 | SNOWY RASTER AND AUDIO FROM ONE CHANNEL IS ALL THAT CAN BE HEARD - CHANNEL NUMBER DOES CHANGE | CHECK/REPLACE TUNER OR PRESCALER IC INSIDE TUNER IC - (P/N# 483520987893) | |
PHILCO | R4943C | 25G1 | HORZ. WAVE FLOATING THROUGH PICTURE | SEE SERVICE BULLETIN NOV/DEC 1988 ISSUE 6 | |
PHILCO | R4943C | 25G1 | SOUND INTERMITTENT AND ERRATIC ON SCREEN DISPLAY | REPLACED D306 | |
PHILCO | R4943C | 25G1 | BEAT IN THE PICTURE | CHECK/REPLACE R433 | |
PHILCO | R4943C | 25G1 | SET DEAD | REPLACED INTERGRATED CIRCUIT IC550 | |
PHILCO | R4943C | 25G1 | HIGH VOLTAGE PULSATES ON/OFF - NO PICTURE AND 130v B+ IS LOW | CHECK/REPLACE IC550 (LA7831) AND R445 (1 @ 1/2w) | |
PHILCO | R4943C | 25G1 | POP OR CHIRP IN THE AUDIO AT TURN OFF | CHECK FOR A 0.1uF AT PIN #6 OF IC (COUPLING CAP.) | |
PHILCO | R4943C | 25G1 | POWER SUPPLY GOES INTO SHUTDOWN AT POWER ON OR CHANNEL CHANGE OR SCENE CHANGES. | CHECK/REPLACE R433 (115K) FOR CHANGE IN VALUE. | |
PHILCO | R4943C | 25G1 | DEAD SET | CHECK Q420,R430 AND D448 | |
PHILCO | R4943C | 25G1 | NO VIDEO HAS JAIL BARS | CHECK Z670,R673,D670,C680 | |
PHILCO | R4943C | 25G1 | BRIGHT SCREEN WITH RETRACE LINES,NO SOUND OR PIX AND SET CANNOT BE SHUT OFF - NO KEYBOARD FUNCTIONS | CHECK/REPLACE Z300 (MAY CHECK GOOD BUT LEAKY) | |
PHILCO | R4943C | 25G1 | LOUD RUSHING SOUND W/RETRACE BEFORE GOING OUT | CHECK Z300 | |
PHILCO | R4943C | 25G1 | POOR HORZ. HOLD,PIECRUSTING,BENDING,ETC. | REPLACE AVJ034A001 JACK PANEL | |
PHILCO | R4943C | 25G1 | INTERMITTENT AUDIO | REPLACED INDUCTOR L307 | |
PHILCO | R4943C | 25G1 | POOR VIDEO | CHECK/REPLACE C249 | |
PHILCO | R4943C | 25G1 | WASHED OUT VIDEO - OSD GRAPHICS ARE PERFECTLY NORMAL | CHECK/REPLACE Q641,Q642 AND Q643 FOR E-B SHORTS | |
PHILCO | R4972C | 25G1 | HIGH VOLTAGE PULSATES ON/OFF - NO PICTURE AND 130v B+ IS LOW | CHECK/REPLACE IC550 (LA7831) AND R445 (1 @ 1/2w) | |
PHILCO | R4972C | 25G1 | SOUND INTERMITTENT AND ERRATIC ON SCREEN DISPLAY | REPLACED D306 | |
PHILCO | R4972C | 25G1 | SET DEAD | REPLACED INTERGRATED CIRCUIT IC550 | |
PHILCO | R4972C | 25G1 | SECONDARY CONTROLS LOCK-UP AFTER 30 MINUTES OF OPERATION ALSO THE OSD GRAPHICS ROLL VERTICALLY | CHECK/REPLACE D306 | |
PHILCO | R4972C | 25G1 | BEAT IN THE PICTURE | CHECK/REPLACE R433 | |
PHILCO | R4972C | 25G1 | POOR VIDEO | CHECK/REPLACE C249 | |
PHILCO | R4972C | 25G1 | WEAK VIDEO IN PICTURE | CHECK/REPLACE C249 FOR SHORT | |
PHILCO | R4972C | 25G1 | WASHED OUT VIDEO - OSD GRAPHICS ARE PERFECTLY NORMAL | CHECK/REPLACE Q641,Q642 AND Q643 FOR E-B SHORTS | |
PHILCO | R4972C | 25G1 | SNOWY RASTER AND AUDIO FROM ONE CHANNEL IS ALL THAT CAN BE HEARD - CHANNEL NUMBER DOES CHANGE | CHECK/REPLACE TUNER OR PRESCALER IC INSIDE TUNER IC - (P/N# 483520987893) | |
PHILCO | R4972C | 25G1 | POWER SUPPLY GOES INTO SHUTDOWN AT POWER ON OR CHANNEL CHANGE OR SCENE CHANGES. | CHECK/REPLACE R433 (115K) FOR CHANGE IN VALUE. | |
PHILCO | R4972C | 25G1 | POP OR CHIRP IN THE AUDIO AT TURN OFF | CHECK FOR A 0.1uF AT PIN #6 OF IC (COUPLING CAP.) | |
PHILCO | R4972C | 25G1 | REDUCED LDR RANGE AND LED BRIGHTNESS | INSTALL 47K AT JUMPER B397-R91 2.4k R261 4.3k | |
PHILCO | R4972C | 25G1 | NO VIDEO HAS JAIL BARS | CHECK Z670,R673,D670,C680 | |
PHILCO | R4972C | 25G1 | POOR AFT LOCK - ADJUSTING AFT DETECTOR HELPS BUT DOESN'T COMPLETELY CORRECT | CHECK/REPLACE Y200 SAW FILTER (P/N# 483515497068) | |
PHILCO | R4972C | 25G1 | HORZ. WAVE FLOATING THROUGH PICTURE | SEE SERVICE BULLETIN NOV/DEC 1988 ISSUE 6 | |
PHILCO | R4972C | 25G1 | DEAD SET | CHECK Q420,R430 AND D448 | |
PHILCO | R4972C | 25G1 | INTERMITTENT AUDIO | REPLACED INDUCTOR L307 | |
PHILCO | R4972C | 25G1 | TV CYCLING ON AND OFF | CHECK FOR SHORTED VERTICAL OUTPUT IC LOADING DOWN | |
PHILCO | R4972C | 25G1 | BRIGHT SCREEN WITH RETRACE LINES,NO SOUND OR PIX AND SET CANNOT BE SHUT OFF - NO KEYBOARD FUNCTIONS | CHECK/REPLACE Z300 (MAY CHECK GOOD BUT LEAKY) | |
PHILCO | R4972C | 25G1 | POOR HORZ. HOLD,PIECRUSTING,BENDING,ETC. | REPLACE AVJ034A001 JACK PANEL | |
PHILCO | R4972C | 25G1 | LOUD RUSHING SOUND W/RETRACE BEFORE GOING OUT | CHECK Z300 | |
PHILCO | R5185C | 27H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE L504 WITH NEW PART (362113-6) | |
PHILCO | R5185C | 27H1 | DEAD SET -(Q410 SHORTED AND R403 OPEN) | REPLACE IC401,Q410 AND R403 | |
PHILCO | R5185C | 27H1 | DEAD SET AND FUSE DOESN'T BLOW | CHECK/REPLACE IC401 | |
PHILCO | R5185C | 27H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R5185C | 27H1 | HIGH BRIGHTNESS WITH RETRACE LINES | CHECK/REPLACE D502 AND R512 | |
PHILCO | R5185C | 27H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R5185C | 27H1 | PICTURE SHRINKS ON BRIGHT SCENES (USUALLY AFTER Q410 HAS FAILED) | CHECK/REPLACE R424 AND R425 (THESE CANNOT BE MEASURED ACCURATELY) | |
PHILCO | R5185C | 27H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE Q500 (SHOULD NOT BE MOTOROLA) | |
PHILCO | R5185C | 27H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R5185C | 27H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R5185C | 27H1 | INTERMITTENT SOUND OR A BUZZ IN SOUND | CHECK/REPLACE C205 (SMD) | |
PHILCO | R5185C | 27H1 | THIN 1/4' LINE DOWN LEFT SIDE OF PICTURE ABOUT 3' FROM THE EDGE. NOT PRESENT IN THE PIP PIX OR VIDEO OUTPUT JACK | CHECK/REPLACE Q500 (6105549001) | |
PHILCO | R5185C | 27H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R5185C | 27H1 | NO SOUND BUT DOES HAVE A HISS OR HUM IN SPEAKERS | CHECK/REPLACE C205 (0.01uF SMD) | |
PHILCO | R5185C | 27H1 | INTERMITTENT SQUEAL FROM CHASSIS | CHECK SMD C427 (2530081029) / ALSO C416 | |
PHILCO | R5185C | 27H1 | SKIPS CHANNELS-TURN OFF TIME AT TURN ON | REPLACE MICROCOMPUTER WITH UPDATED VERSION | |
PHILCO | R5185C | 27H1 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
PHILCO | R5185C | 27H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 | |
PHILCO | R5185C | 27H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R5185C | 27H1 | FAILURE OF VERTICAL OUT.IC FROM CRT ARCING | ADD DIODE P/N 5303177001 W/ANODE TO PIN 3 OF IC550 | |
PHILCO | R5185C | 27H1 | SQUEAL FROM CHASSIS WHILE ON | CHECK/REPLACE C416 (USUALLY PHYSICAL DAMAGE) USE P/N 002530083329 | |
PHILCO | R5185C | 27H1 | NO OR INTERMITTENT COLOR | CHECK/REPLACE C661 (SMD) | |
PHILCO | R5185C | 27H1 | CLOCK DOES NOT UPDATE OR RUN | CHECK/REPLACE IC301 | |
PHILCO | R5185C | 27H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7183C | 27H1 | NO OR INTERMITTENT COLOR | CHECK/REPLACE C661 (SMD) | |
PHILCO | R7183C | 27H1 | NO SOUND BUT DOES HAVE A HISS OR HUM IN SPEAKERS | CHECK/REPLACE C205 (0.01uF SMD) | |
PHILCO | R7183C | 27H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7183C | 27H1 | DEAD SET AND FUSE DOESN'T BLOW | CHECK/REPLACE IC401 | |
PHILCO | R7183C | 27H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R7183C | 27H1 | HIGH BRIGHTNESS WITH RETRACE LINES | CHECK/REPLACE D502 AND R512 | |
PHILCO | R7183C | 27H1 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
PHILCO | R7183C | 27H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE L504 WITH NEW PART (362113-6) | |
PHILCO | R7183C | 27H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE Q500 (SHOULD NOT BE MOTOROLA) | |
PHILCO | R7183C | 27H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7183C | 27H1 | CLOCK DOES NOT UPDATE OR RUN | CHECK/REPLACE IC301 | |
PHILCO | R7183C | 27H1 | DEAD SET -(Q410 SHORTED AND R403 OPEN) | REPLACE IC401,Q410 AND R403 | |
PHILCO | R7183C | 27H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R7183C | 27H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 | |
PHILCO | R7183C | 27H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7183C | 27H1 | THIN 1/4' LINE DOWN LEFT SIDE OF PICTURE ABOUT 3' FROM THE EDGE. NOT PRESENT IN THE PIP PIX OR VIDEO OUTPUT JACK | CHECK/REPLACE Q500 (6105549001) | |
PHILCO | R7183C | 27H1 | INTERMITTENT SQUEAL FROM CHASSIS | CHECK SMD C427 (2530081029) / ALSO C416 | |
PHILCO | R7183C | 27H1 | SKIPS CHANNELS-TURN OFF TIME AT TURN ON | REPLACE MICROCOMPUTER WITH UPDATED VERSION | |
PHILCO | R7183C | 27H1 | SQUEAL FROM CHASSIS WHILE ON | CHECK/REPLACE C416 (USUALLY PHYSICAL DAMAGE) USE P/N 002530083329 | |
PHILCO | R7183C | 27H1 | PICTURE SHRINKS ON BRIGHT SCENES (USUALLY AFTER Q410 HAS FAILED) | CHECK/REPLACE R424 AND R425 (THESE CANNOT BE MEASURED ACCURATELY) | |
PHILCO | R7183C | 27H1 | INTERMITTENT SOUND OR A BUZZ IN SOUND | CHECK/REPLACE C205 (SMD) | |
PHILCO | R7183C | 27H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R7183C | 27H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R7183C | 27H1 | FAILURE OF VERTICAL OUT.IC FROM CRT ARCING | ADD DIODE P/N 5303177001 W/ANODE TO PIN 3 OF IC550 | |
PHILCO | R7185C | 27H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R7185C | 27H1 | CLOCK DOES NOT UPDATE OR RUN | CHECK/REPLACE IC301 | |
PHILCO | R7185C | 27H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R7185C | 27H1 | DEAD SET -(Q410 SHORTED AND R403 OPEN) | REPLACE IC401,Q410 AND R403 | |
PHILCO | R7185C | 27H1 | SQUEAL FROM CHASSIS WHILE ON | CHECK/REPLACE C416 (USUALLY PHYSICAL DAMAGE) USE P/N 002530083329 | |
PHILCO | R7185C | 27H1 | INTERMITTENT SOUND OR A BUZZ IN SOUND | CHECK/REPLACE C205 (SMD) | |
PHILCO | R7185C | 27H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R7185C | 27H1 | INTERMITTENT SQUEAL FROM CHASSIS | CHECK SMD C427 (2530081029) / ALSO C416 | |
PHILCO | R7185C | 27H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R7185C | 27H1 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
PHILCO | R7185C | 27H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 | |
PHILCO | R7185C | 27H1 | SKIPS CHANNELS-TURN OFF TIME AT TURN ON | REPLACE MICROCOMPUTER WITH UPDATED VERSION | |
PHILCO | R7185C | 27H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7185C | 27H1 | HIGH BRIGHTNESS WITH RETRACE LINES | CHECK/REPLACE D502 AND R512 | |
PHILCO | R7185C | 27H1 | THIN 1/4' LINE DOWN LEFT SIDE OF PICTURE ABOUT 3' FROM THE EDGE. NOT PRESENT IN THE PIP PIX OR VIDEO OUTPUT JACK | CHECK/REPLACE Q500 (6105549001) | |
PHILCO | R7185C | 27H1 | FAILURE OF VERTICAL OUT.IC FROM CRT ARCING | ADD DIODE P/N 5303177001 W/ANODE TO PIN 3 OF IC550 | |
PHILCO | R7185C | 27H1 | NO OR INTERMITTENT COLOR | CHECK/REPLACE C661 (SMD) | |
PHILCO | R7185C | 27H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE L504 WITH NEW PART (362113-6) | |
PHILCO | R7185C | 27H1 | NO SOUND BUT DOES HAVE A HISS OR HUM IN SPEAKERS | CHECK/REPLACE C205 (0.01uF SMD) | |
PHILCO | R7185C | 27H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7185C | 27H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7185C | 27H1 | DEAD SET AND FUSE DOESN'T BLOW | CHECK/REPLACE IC401 | |
PHILCO | R7185C | 27H1 | PICTURE SHRINKS ON BRIGHT SCENES (USUALLY AFTER Q410 HAS FAILED) | CHECK/REPLACE R424 AND R425 (THESE CANNOT BE MEASURED ACCURATELY) | |
PHILCO | R7185C | 27H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE Q500 (SHOULD NOT BE MOTOROLA) | |
PHILCO | R7285C | 27H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R7285C | 27H1 | NO SOUND BUT DOES HAVE A HISS OR HUM IN SPEAKERS | CHECK/REPLACE C205 (0.01uF SMD) | |
PHILCO | R7285C | 27H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7285C | 27H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7285C | 27H1 | DEAD SET AND FUSE DOESN'T BLOW | CHECK/REPLACE IC401 | |
PHILCO | R7285C | 27H1 | HIGH BRIGHTNESS WITH RETRACE LINES | CHECK/REPLACE D502 AND R512 | |
PHILCO | R7285C | 27H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7285C | 27H1 | PICTURE SHRINKS ON BRIGHT SCENES (USUALLY AFTER Q410 HAS FAILED) | CHECK/REPLACE R424 AND R425 (THESE CANNOT BE MEASURED ACCURATELY) | |
PHILCO | R7285C | 27H1 | CLOCK DOES NOT UPDATE OR RUN | CHECK/REPLACE IC301 | |
PHILCO | R7285C | 27H1 | FAILURE OF VERTICAL OUT.IC FROM CRT ARCING | ADD DIODE P/N 5303177001 W/ANODE TO PIN 3 OF IC550 | |
PHILCO | R7285C | 27H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R7285C | 27H1 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
PHILCO | R7285C | 27H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 | |
PHILCO | R7285C | 27H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE L504 WITH NEW PART (362113-6) | |
PHILCO | R7285C | 27H1 | THIN 1/4' LINE DOWN LEFT SIDE OF PICTURE ABOUT 3' FROM THE EDGE. NOT PRESENT IN THE PIP PIX OR VIDEO OUTPUT JACK | CHECK/REPLACE Q500 (6105549001) | |
PHILCO | R7285C | 27H1 | INTERMITTENT SOUND OR A BUZZ IN SOUND | CHECK/REPLACE C205 (SMD) | |
PHILCO | R7285C | 27H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE Q500 (SHOULD NOT BE MOTOROLA) | |
PHILCO | R7285C | 27H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R7285C | 27H1 | SKIPS CHANNELS-TURN OFF TIME AT TURN ON | REPLACE MICROCOMPUTER WITH UPDATED VERSION | |
PHILCO | R7285C | 27H1 | DEAD SET -(Q410 SHORTED AND R403 OPEN) | REPLACE IC401,Q410 AND R403 | |
PHILCO | R7285C | 27H1 | NO OR INTERMITTENT COLOR | CHECK/REPLACE C661 (SMD) | |
PHILCO | R7285C | 27H1 | SQUEAL FROM CHASSIS WHILE ON | CHECK/REPLACE C416 (USUALLY PHYSICAL DAMAGE) USE P/N 002530083329 | |
PHILCO | R7285C | 27H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R7285C | 27H1 | INTERMITTENT SQUEAL FROM CHASSIS | CHECK SMD C427 (2530081029) / ALSO C416 | |
PHILCO | R7585C | 31H1 | DEAD SET AND FUSE DOESN'T BLOW | CHECK/REPLACE IC401 | |
PHILCO | R7585C | 31H1 | TO IMPROVE DEGUASSING | CHANGE R405 FROM A 20K TO A 4.7K | |
PHILCO | R7585C | 31H1 | HIGH BRIGHTNESS WITH RETRACE LINES | CHECK/REPLACE D502 AND R512 | |
PHILCO | R7585C | 31H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R7585C | 31H1 | CLOCK DOES NOT UPDATE OR RUN | CHECK/REPLACE IC301 | |
PHILCO | R7585C | 31H1 | INTERMITTENT SQUEAL FROM CHASSIS | CHECK SMD C427 (2530081029) / ALSO C416 | |
PHILCO | R7585C | 31H1 | SET SHUTS OFF INTERMITTENTLY -VERTICAL FAILSAFE WAS BEING ACTIVATED. | CHECK/RESOLDER CONNECTIONS ON J604-2 OR BAD WIRE CRIMP. | |
PHILCO | R7585C | 31H1 | INTERMITTENT SOUND OR A BUZZ IN SOUND | CHECK/REPLACE C205 (SMD) | |
PHILCO | R7585C | 31H1 | DEAD SET - NO ATTEMPT TO TURN ON | CHECK/RESOLDER CONNECTIONS ON Q410 | |
PHILCO | R7585C | 31H1 | DEAD SET -(Q410 SHORTED AND R403 OPEN) | REPLACE IC401,Q410 AND R403 | |
PHILCO | R7585C | 31H1 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
PHILCO | R7585C | 31H1 | INTERMITTENT COLOR | CHECK/REPLACE C661 (0.015uF SMD) | |
PHILCO | R7585C | 31H1 | SKIPS CHANNELS-SHOWS TURN OFF AT TURN ON TIME | REPLACE THE MICROCOMPUTER | |
PHILCO | R7585C | 31H1 | DEAD SET AND FUSE DOESN'T BLOW | CHECK/REPLACE IC401 | |
PHILCO | R7585C | 31H1 | SQUEAL FROM CHASSIS WHILE ON | CHECK/REPLACE C416 (USUALLY PHYSICAL DAMAGE) USE P/N 002530083329 | |
PHILCO | R7585C | 31H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE Q500 (SHOULD NOT BE MOTOROLA) | |
PHILCO | R7585C | 31H1 | SKIPS CHANNELS-TURN OFF TIME AT TURN ON | REPLACE MICROCOMPUTER WITH UPDATED VERSION | |
PHILCO | R7585C | 31H1 | WIDTH SHRINKS AFTER WARM UP | C6 AND/OR C7 INSTALLED BACKWARDS (PINCUSHION MODULE) | |
PHILCO | R7585C | 31H1 | INTERMITTENT OR NO COLOR | CHECK/REPLACE C661 | |
PHILCO | R7585C | 31H1 | NO SOUND BUT DOES HAVE A HISS OR HUM IN SPEAKERS | CHECK/REPLACE C205 (0.01uF SMD) | |
PHILCO | R7585C | 31H1 | FAILURE OF VERTICAL OUT.IC FROM CRT ARCING | ADD DIODE P/N 5303177001 W/ANODE TO PIN 3 OF IC550 | |
PHILCO | R7585C | 31H1 | PICTURE SHIFTED TO THE RIGHT ABOUT 2' - BLACK SHOWS ON THE LEFT AND LIGHT OVER SHADOW ON THE RIGHT - NO OSD | CHECK/REPLACE C525 AND R524 | |
PHILCO | R7585C | 31H1 | NO VERTICAL SWEEP OR REPEATED VERTICAL FAILURES | CHECK/REPLACE IC550 AND R553 (R553 SHOULD BE REPLACED WITH A 2 OHM 1/2 W LEADED TYPE RESISTOR) | |
PHILCO | R7585C | 31H1 | PICTURE SHRINKS ON BRIGHT SCENES (USUALLY AFTER Q410 HAS FAILED) | CHECK/REPLACE R424 AND R425 (THESE CANNOT BE MEASURED ACCURATELY) | |
PHILCO | R7585C | 31H1 | RASTER FLUCTUATES FROM FULL TO SMALL | CHECK/REPLACE IC680 ON CHARACTER GENERATOR BOARD | |
PHILCO | R7585C | 31H1 | THIN 1/4' LINE DOWN LEFT SIDE OF PICTURE ABOUT 3' FROM THE EDGE. NOT PRESENT IN THE PIP PIX OR VIDEO OUTPUT JACK | CHECK/REPLACE Q500 (6105549001) | |
PHILCO | R7585C | 31H1 | NO OR INTERMITTENT COLOR | CHECK/REPLACE C661 (SMD) | |
PHILCO | R7585C | 31H1 | DEAD SET WITH NO BLOWN FUSES | CHECK/REPLACE Q501 FOR SHORTS | |
PHILCO | R7585C | 31H1 | JAIL BARS IN LEFT SIDE OF PICTURE | CHECK/REPLACE L504 WITH NEW PART (362113-6) | |
PHILIPS | N/A | 13A1 | DEAD SET AND SWITCHED MODE WAS CHIRPING | CHECK/REPLACE D420 AND D583 | |
PHILIPS | N/A | 13A2 | INTERMITTENTLY GOES OFF | CHECK/RESOLDER CONNECTIONS ON PIN #10 OF FLYBACK | |
PHILIPS | N/A | 13A2 | WILL NOT START-LED LIGHTS | CHANGE R482 FROM 1k TO 220 OHM | |
PHILIPS | N/A | 13A2 | DEAD SET AND SWITCHED MODE WAS CHIRPING | CHECK/REPLACE D420 AND D583 | |
PHILIPS | N/A | 13A2 | SET WILL COME ON INTERMITTENTLY WITH A GREY SCREEN AND NORMAL SOUND. | CHECK/REPLACE C629 FOR OPENING INTERMITTENTLY | |
PHILIPS | N/A | 13A2 | DEAD SET | CHECK/REPLACE R407 | |
PHILIPS | N/A | 13A2 | DEAD - POSSIBLY INTERMITTENT | CHECK POWER SWITCH CONNECTIONS TO THE PC BOARD | |
PHILIPS | N/A | 13A2 | TV GETS VERY BRIGHT THE CONTROL HAS NO EFFECT | CHECK/REPLACE D600 | |
PHILIPS | N/A | 13A2 | RASTER ONLY - NO SNOW | CHECK/REPLACE C239 | |
PHILIPS | N/A | 13A2 | DEAD SET | CHECK/REPLACE D583 AND D420 | |
PHILIPS | N/A | 13A2 | SQUEAL WHILE SET IS OFF | CHECK/REPLACE T402 | |
PHILIPS | N/A | 13A2 | WON'T START-SOME VOLTAGES LOW | CHECK/REPLACE D410,D411,D412 | |
PHILIPS | N/A | 13A2 | NO CHANNEL 7-ALL OTHERS ARE OK BUT TUNING BAR IS COMPRESSED | CHECK/REPLACE R305 AND Q305 | |
PHILIPS | N/A | 13A2 | SHORT VERTICAL SWEEP | CHECK/REPLACE R581 | |
PHILIPS | N/A | 13A2 | VERT SWEEP INVERTED | CHECK/REPLACE R581--3.3MEG OHM IN VERT CRKT. FOR OPEN | |
PHILIPS | N/A | 13A2 | DEAD SET | CHECK/REPLACE C476 | |
PHILIPS | N/A | 13C3 | WEAK SOUND OR STATIC IN SOUND | CHECK/CLEAN FLUX BUILD UP FROM IC100,IC200,IC500 AND SF130 | |
PHILIPS | N/A | 13C3 | PICTURE ALL GREEN | CHECK/REPLACE Q602,Q604 | |
PHILIPS | N/A | 13C3 | DEAD SET | CHECK/RESOLDER CONNECTION ON R466 | |
PHILIPS | N/A | 13C3 | DEAD SET | REPLACED OPEN R418,R417 | |
PHILIPS | N/A | 13C3 | SOFT VERTICAL BOUNCE | CHECK/REPLACE C510 | |
PHILIPS | N/A | 13C3 | SMALL RASTER | CHECK/REPLACE R424 | |
PHILIPS | N/A | 13C3 | SNOWY PIX - EXCESSIVE PEAKING OR SHARPNESS | ADD A 22k TO PIN 3 OF PLUG P11 TO GROUND | |
PHILIPS | N/A | 13C3 | DEAD SET | CHECK/RESOLDER CONNECTIONS ON R466 | |
PHILIPS | N/A | 13C3 | HIGH FREQUENCY SQUEAL | CHECK/REPLACE L458 | |
PHILIPS | N/A | 13C3 | BEAT PATTERN IN PICTURE | RE-ADJUST L156 | |
PHILIPS | N/A | 13C3 | DISTORTED AUDIO | CHECK/REPLACE IC202 | |
PHILIPS | N/A | 13C3 | WEAK COLOR | CHECK/CLEAN FLUX BUILD UP FROM IC100,IC200,IC500,SF130 | |
PHILIPS | N/A | 13C3 | INTERMITTENT PICTURE - CHANNEL INDICATOR BLINKS ON/OFF | CHECK/REPLACE C474 | |
PHILIPS | N/A | 13C3 | NO VIDEO BUT HAS EXCESSIVE BRIGHTNESS | CHECK/REPLACE R601 ON CRT BOARD | |
PHILIPS | N/A | 13C3 | NO HORZ. SYNC | CHECK/REPLACE IC500 | |
PHILIPS | N/A | 13C3 | INTERMITTENT SHUTDOWN | CHECK/REPLACE Q410 | |
PHILIPS | N/A | 13C3 | GREEN PIX AND LOW BRIGHTNESS | CHECK/REPLACE Q406 | |
PHILIPS | N/A | 13C3 | VERTICAL JITTER OR FLAGGING WITH A VCR | CHANGE R564 TO 820 ohm,C534 TO .15uF,R550 TO 39 ohm AND R552 TO 6.8k | |
PHILIPS | N/A | 13C3 | DEAD SET | CHECK/REPLACE Q408,T452,Q410,C404,IC500,T400 OR CONNECTIONS ON R469,R470,IFT | |
PHILIPS | N/A | 13C3 | VERTICAL COMPRESSION AND SLIGHT STRETCH IN THE CENTER WHEN CHANNELS ARE CHANGED AND BOUNCE ON SCENE CHANGES. | CHECK/REPLACE C510 | |
PHILIPS | N/A | 13C5 | NO SOUND OR PIX | CHECK D461 FOR LEAKAGE (MAY CHECK GOOD FRONT TO BACK) | |
PHILIPS | N/A | 13C5 | SET SHUTS OFF WITH AC BELOW 110 VOLTS | CHECK/REPLACE C458 |
LAMSON
Digital Electronics Address: 1324-1326 Jose Abad Santos Ave.,Manila, Philippines TEL:00632-2559675 TEL/FAX:00632-2568130 Cellular:0922-8867809 0922-8867810 E-mail:lamsonsm@gmail.com
YAHOO MESSENGER ID : myrna_q_ng or saishu_ng (old) Lamson Importers & Exporters Trading <We will not be
using the old address and phone no. in the future. Please be
noted when calling us, sending letters, parcels or buying our products>
|